Skip to content

Latest commit

 

History

History
 
 

audioamp5

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
 
 
 
 
 
 
 
 
 
 
 
 
 
 

\mainpage Main Page


Audio Amp 5 click

AudioAmp 5 Click is a stereo audio amplifier, capable of delivering up to 10W per channel with the 8Ω load.

click Product page


Click library

  • Author : Petar Suknjaja
  • Date : Dec 2019.
  • Type : GPIO type

Software Support

We provide a library for the AudioAmp5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for AudioAmp5 Click driver. The library performs the audio control of the Audio Amp 5 Click board. This library consists of the special commands for audio output control, for example to mute/turn on the outputs, to select the desired output gain or mode.

Standard key functions :

  • Config Object Initialization function.

void audioamp5_cfg_setup ( audioamp5_cfg_t *cfg );

  • Initialization function.

AUDIOAMP5_RETVAL audioamp5_init ( audioamp5_t *ctx, audioamp5_cfg_t *cfg );

  • Click Default Configuration function.

void audioamp5_default_cfg ( audioamp5_t *ctx );

Example key functions :

  • Function puts a device to the desired mode.

void audioamp5_mode_select ( audioamp5_t *ctx, uint8_t state );

  • Function performs a desired gain selection.

void audioamp5_gain_select ( audioamp5_t *ctx, uint8_t state );

  • Function to update the configuration of the module.

void audioamp5_config_update ( audioamp5_t *ctx );

Examples Description

This example consist of sending special commands for audio output control, selecting different output modes and turning on/off the audio output.

The demo application is composed of two sections :

Application Init

Initializes GPIO interface on the desired mikrobus selection, and performs a device init configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;
    audioamp5_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    audioamp5_cfg_setup( &cfg );
    AUDIOAMP5_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    audioamp5_init( &audioamp5, &cfg );

    audioamp5_default_cfg( &audioamp5 );
    log_printf( &logger, "** Audio Amp 5 is initialized **\r\n" );
    Delay_ms( 500 );
}

Application Task

Checks the entered command and, if the command is valid, performs a device configuration which the entered command determines.

void application_task ( void )
{
    //  Task implementation.
    
    audioamp5_gain_select( &audioamp5, AUDIOAMP5_GAIN_26DB );
    audioamp5_config_update( &audioamp5 );
    log_printf( &logger, "** Gain value is 26dB **\r\n" );    

    Delay_ms ( 5000 );

    audioamp5_gain_select( &audioamp5, AUDIOAMP5_GAIN_20DB );
    audioamp5_config_update( &audioamp5 );
    log_printf( &logger, "** Gain value is 20dB **\r\n" );  
    
    Delay_ms ( 5000 );
}

Note

After each command for device configuration, the command for configuration updating will be executed. When BD Mode (0) is selected, the VIN supply voltage threshold is 7.5V. When Low-Idle-Current 1SPW Mode is selected, the VIN supply voltage threshold > is 3.4V.

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.AudioAmp5

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.