Skip to content

Latest commit

 

History

History
172 lines (123 loc) · 8.84 KB

build.md

File metadata and controls

172 lines (123 loc) · 8.84 KB
Raw
layout title permalink
page
Build
/build/

To build GTSAM from source, clone or download the latest release from the GTSAM Github repo. Then follow the build & install instructions below.

{% include quick_start_module.md %}

Important Installation Notes

  1. GTSAM requires the following libraries to be installed on your system:

    • BOOST version 1.43 or greater (install through Linux repositories or MacPorts)

    • Cmake version 3.0 or higher

    • Support for XCode 4.3 command line tools on Mac requires CMake 2.8.8 or higher

    • Optional dependent libraries:

      • If TBB is installed and detectable by CMake GTSAM will use it automatically. Ensure that CMake prints "Use Intel TBB : Yes". To disable the use of TBB, disable the CMake flag GTSAM_WITH_TBB (enabled by default). On Ubuntu, TBB may be installed from the Ubuntu repositories, and for other platforms it may be downloaded from here.
      • GTSAM may be configured to use MKL by toggling GTSAM_WITH_EIGEN_MKL and GTSAM_WITH_EIGEN_MKL_OPENMP to ON. However, best performance is usually achieved with MKL disabled. We therefore advise you to benchmark your problem before using MKL.

  2. Configurations

    • Tested compilers:
      • GCC 4.2-7.3
      • OS X Clang 2.9-10.0
      • OS X GCC 4.2
      • MSVC 2017
    • Tested systems:
      • Ubuntu 16.04 - 18.04
      • MacOS 10.6 - 10.14
      • Windows 7, 8, 8.1, 10

  3. GTSAM makes extensive use of debug assertions, and we highly recommend you work in Debug mode while developing (not enabled by default). Likewise, it is imperative that you switch to release mode when running finished code and for timing. GTSAM will run up to 10x faster in Release mode! See the end of this document for additional debugging tips.

  4. GTSAM has Doxygen documentation. To generate, run make doc from your build directory, or refer to the statically generated version on this website.

  5. The instructions below install the library to the default system install path and build all components. From a terminal, starting in the root library folder, execute the commands below for an out-of-source build. This will build the library and unit tests, run all of the unit tests, and then install the library itself.

  $ mkdir build
  $ cd build
  $ cmake ..
  $ make check (optional, runs unit tests)
  $ make install

CMake Configuration Options and Details

GTSAM has a number of options that can be configured, which is best done with one of the following:

  • ccmake: the curses GUI for cmake
  • cmake-gui: a real GUI for cmake

Important Options:

CMAKE_BUILD_TYPE

We support several build configurations for GTSAM (case insensitive)

`cmake -DCMAKE_BUILD_TYPE=[Option] ..`

  • Debug: All error checking options on, no optimization. Use for development of new features and fixing issues.
  • Release: Optimizations turned on, no debug symbols.
  • Timing: Adds ENABLE_TIMING flag to provide statistics on operation
  • Profiling: Standard configuration for use during profiling
  • RelWithDebInfo: Same as Release, but with the - g flag for debug symbols

CMAKE_INSTALL_PREFIX

The install folder.The default is typically /usr/local/ . To configure to install to your home directory, you could execute: `cmake -DCMAKE_INSTALL_PREFIX:PATH=$HOME ..`

GTSAM_TOOLBOX_INSTALL_PATH

The Matlab toolbox will be installed in a subdirectory of this folder, called 'gtsam'.

cmake -DGTSAM_TOOLBOX_INSTALL_PATH:PATH=$HOME/toolbox ..

GTSAM_BUILD_CONVENIENCE_LIBRARIES

This is a build option to allow for tests in subfolders to be linked against convenience libraries rather than the full libgtsam. Set with the command line as follows:

cmake -DGTSAM_BUILD_CONVENIENCE_LIBRARIES:OPTION=ON ..
  • ON (Default): This builds convenience libraries and links tests against them.This option is suggested for gtsam developers, as it is possible to build and run tests without first building the rest of the library, and speeds up compilation for a single test.The downside of this option is that it will build the entire library again to build the full libgtsam library, so build / install will be slower.
  • OFF: This will build all of libgtsam before any of the tests, and then link all of the tests at once.This option is best for users of GTSAM, as it avoids rebuilding the entirety of gtsam an extra time.

GTSAM_BUILD_UNSTABLE

Enable build and install for libgtsam_unstable library. Set with the command line as follows:

cmake -DGTSAM_BUILD_UNSTABLE:OPTION=ON ..
  • ON (Default): When enabled, libgtsam_unstable will be built and installed with the same options as libgtsam.In addition, if tests are enabled, the unit tests will be built as well.The Matlab toolbox will also be generated if the matlab toolbox is enabled, installing into a folder called gtsam_unstable.
  • OFF: If disabled, no gtsam_unstable code will be included in build or install.

MEX_COMMAND

Path to the mex compiler. Defaults to assume the path is included in your shell 's PATH environment variable. mex is installed with matlab at $MATLABROOT/bin/mex. The correct value for MATLABROOT can be found by executing the command matlabroot in MATLAB

Running the unit tests

make check will build and run all of the tests.Note that the tests will only be built when using the "check" targets, to prevent make install from building the tests unnecessarily.

You can also run make timing to build all of the timing scripts. To run check on a particular module only, run make check.[subfolder] , so to run just the geometry tests, run make check.geometry .

Individual tests can be run by appending .run to the name of the test, for example, to run testMatrix, run make testMatrix.run .

Performance

Here are some tips to get the best possible performance out of GTSAM.

  1. Build in Release mode. GTSAM will run up to 10 x faster compared to Debug mode.

  2. Enable TBB.On modern processors with multiple cores, this can easily speed up optimization by 30 - 50 %. Please note that this may not be true for very small problems where the overhead of dispatching work to multiple threads outweighs the benefit.We recommend that you benchmark your problem with / without TBB.

  3. Add -march=native to GTSAM_CMAKE_CXX_FLAGS. A performance gain of 25 - 30 % can be expected on modern processors.Note that this affects the portability of your executable. It may not run when copied to another system with older / different processor architecture. Also note that all dependent projects * must * be compiled with the same flag, or segfaults and other undefined behavior may result.

  4. Possibly enable MKL. Please note that our benchmarks have shown that this helps only in very limited cases, and actually hurts performance in the usual case. We therefore recommend that you do *not * enable MKL, unless you have benchmarked it on your problem and have verified that it improves performance.

Debugging tips

Another useful debugging symbol is _GLIBCXX_DEBUG, which enables debug checks and safe containers in the standard C++library and makes problems much easier to find.

NOTE: The native Snow Leopard g++compiler / library contains a bug that makes it impossible to use _GLIBCXX_DEBUG.MacPorts g++compilers do work with it though.

NOTE: If _GLIBCXX_DEBUG is used to compile gtsam, anything that links against gtsam will need to be compiled with _GLIBCXX_DEBUG as well, due to the use of header - only Eigen.

Installing MKL on Linux

Intel has a guide for installing MKL on Linux through APT repositories here.

After following the instructions, add the following to your ~/.bashrc (and afterwards, open a new terminal before compiling GTSAM): LD_PRELOAD need only be set if you are building the cython wrapper to use GTSAM from python.

source /opt/intel/mkl/bin/mklvars.sh intel64
export LD_PRELOAD="$LD_PRELOAD:/opt/intel/mkl/lib/intel64/libmkl_core.so:/opt/intel/mkl/lib/intel64/libmkl_sequential.so"

To use MKL in GTSAM pass the flag -DGTSAM_WITH_EIGEN_MKL=ON to cmake.

The LD_PRELOAD fix seems to be related to a well known problem with MKL which leads to lots of undefined symbol errors, for example:

Failing to specify LD_PRELOAD may lead to errors such as: ImportError: /opt/intel/mkl/lib/intel64/libmkl_vml_avx2.so: undefined symbol: mkl_serv_getenv or Intel MKL FATAL ERROR: Cannot load libmkl_avx2.so or libmkl_def.so. when importing GTSAM using the cython wrapper in python.