openhab.cfg

# This is the default configuration file, which comes with every openHAB distribution.
# You should do a copy of it with the name 'openhab.cfg' and configure your personal
# settings in there. This way you can be sure that they are not overwritten, if you
# update openHAB one day.


####################################################################################### 
#####                        General configurations                               #####
####################################################################################### 

# Configuration folders (must exist as a subdirectory of "configurations"; the value
# tells the number of seconds for the next scan of the directory for changes. A
# value of -1 deactivates the scan).
# A comma separated list can follow after the refresh value. This list defines a filter
# for valid file extensions for the models.
folder:items=10,items
folder:sitemaps=10,sitemap
folder:rules=10,rules
folder:scripts=10,script
folder:persistence=10,persist

# configures the security options. The following values are valid:
# ON = security is switched on generally
# OFF = security is switched off generally
# EXTERNAL = security is switched on for external requests 
#            (e.g. originating from the Internet) only
# (optional, defaults to 'OFF')
#security:option=

# the Netmask to define a range of internal IP-Addresses which doesn't require
# authorization (optional, defaults to '192.168.1.0/24')
#security:netmask=

# The name of the default persistence service to use
persistence:default=mysql

# The refresh interval for the main configuration file. A value of '-1' 
# deactivates the scan (optional, defaults to '-1' hence scanning is deactivated)
#mainconfig:refresh=


################################## Chart Servlet ######################################
#
# This section defines the configuration for the chart servlet.
chart:provider=default

#
# Set the default height of a chart if the client doesn't provide this in the request
# defaults to 240
#chart:defaultHeight=240

#
# Set the default width of a chart if the client doesn't provide this in the request
# defaults to 480
#chart:defaultWidth=480

#
# Set a scale factor. This is used if the client sets the size in the request.
# defaults to 1 (ie no scaling)
#chart:scale=1


####################################################################################### 
#####                       Action configurations                                 #####
####################################################################################### 

######################## Mail Action configuration ####################################
#
# The SMTP server hostname, e.g. "smtp.gmail.com"
mail:hostname=localhost

# the SMTP port to use (optional, defaults to 25 (resp. 587 for TLS))
mail:port=25

# the username and password if the SMTP server requires authentication
#mail:username=
#mail:password=

# The email address to use for sending mails
mail:from=openhab@fiona.core.bckspc.de

# set to "true", if TLS should be used for the connection
# (optional, defaults to false)
mail:tls=false

# set to "true", if POP before SMTP (another authentication mechanism)
# should be enabled. Username and Password are taken from the above
# configuration (optional, default to false)
#mail:popbeforesmtp=

########################## XMPP Action configuration ##################################
#

# The username of the XMPP account used by openHAB
# Most services will require that you use only the localpart of the accounts JID.
# For example if your accounts JID is myuser@example.org, then only configure 'myuser'.
#xmpp:username=myuser

# The password of the XMPP account used by openHAB
#xmpp:password=mypassword

# The XMPP service to use, e.g. "jabber.de"
# A list of public XMPP services can be found at https://xmpp.net/directory.php
#xmpp:servername=example.org

# The Security mode used for the XMPP connection. Can be either 'required'
# or 'disabled'. Defaults to 'disabled', which means that TLS will not be used.
# Warning: If you change this to non-disabled, then you must make sure that your
# TLS server certificate can be validated, otherwhise the connection will fail.
#xmpp:securitymode=disabled

# The TLS Pin used to verify the XMPP service's certificate. Set this in case openhab's
# default SSLContext is unable to verfiy it (e.g. because the XMPP service uses a self-signed
# certificate). The PIN value is bascially the hash of the certificate in hex.
# You have to set 'xmpp:securitymode' to 'required' to enable TLS for XMPP connections.
# For information on how to generate the PIN visit https://github.com/Flowdalic/java-pinning
#xmpp:tlspin=CERTSHA256:83:F9:17:1E:06:A3:13:11:88:89:F7:D7:93:02:BD:1B:7A:20:42:EE:0C:FD:02:9A:BF:8D:D0:6F:FA:6C:D9:D3

# The XMPP Proxyserver to use, e.g. "gmail.com"
#xmpp:proxy=

# the server port to use (optional, defaults to 5222)
#xmpp:port=

# a comma separated list of users that are allowed to use the XMPP console
#xmpp:consoleusers=

# the multi user chat to join, e.g. openhab@chat.example.com
#xmpp:chatroom=

# the nickname used in the multi user chat (optional, defaults to openhab-bot)
#xmpp:chatnickname=

# the password required to join the multi user chat
#xmpp:chatpassword=

########################## Prowl Action configuration #################################
#
# the apikey for authentication (generated on the Prowl website)
#prowl:apikey=

# the default priority of a Prowl notifications (optional, defaults to '0')
#prowl:defaultpriority=

# the url of the Prowl public api
# (optional, defaults to 'https://prowl.weks.net/publicapi/') 
#prowl:url=

#################### Pushover Action configuration #####################
#
# The timeout for the communication with the Pushover service (optional, defaults
# to 10000 milliseconds)
#pushover:defaultTimeout=

# You need to provide a Pushover API token to send to devices. If not here, than during
# the action call itself.
#pushover:defaultToken=

# You need to provide a Pushover User Key to send to devices. If not here, than during
# the action call itself.
#pushover:defaultUser=

# Name of the sending application (optional). Defaults to 'openHAB'.
#pushover:defaultTitle=openHAB

# The priority to use for messages if not specified otherwise. Can range from
# -2 (lowest) to 2 (highest)
#pushover:defaultPriority=

# Url to attach to the message if not specified in the command (optional). Can be left empty.
#pushover:defaultUrl=

# Url Title to attach to the message if not specified in the command (optional). Can be left empty.
#pushover:defaultUrlTitle=

########################### Twitter Action configuration ##############################
#
# The ConsumerKey, ConsumerSecret combination (optional, defaults to official Twitter-App
# Key-Secret-Combination)
#twitter:key=
#twitter:secret=

# Flag to enable/disable the Twitter client (optional, defaults to 'false')
#twitter:enabled=

#################### Notify my Android (NAM) Action configuration #####################
#
# The timeout for the communication with the NMA service (optional, defaults
# to 10000 milliseconds)
#nma:timeout=

# If you have a developerKey from NMA you can set it here, but this completely optional
#nma:developerKey=

# The default api key to send messages to. Api keys can be created in your accounts dashboard.
#nma:apiKey=

# The application name which NMA will show (optional, defaults to 'openHAB').
#nma:appName=

# The priority to use for messages if not specified otherwise. Can range from
# -2 (lowest) to 2 (highest)
#nma:defaultPriority=

# The URL to attach to NMA messages by default  if not specified otherwise. Can be left empty.
#nma:defaultUrl=


####################################################################################### 
#####                   I/O component configurations                              #####
####################################################################################### 

########################## Google Calendar configuration ##############################
#
# the username and password for Google Calendar Account
#gcal:username=
#gcal:password=

# the url of the calendar feed
#gcal:url=

# the filter criteria for full text query (optional)
#gcal:filter=

# refresh interval in milliseconds (optional, defaults to 900000 [15 minutes])
#gcal:refresh=

############################# Dropbox configuration ###################################
#
# Operates the Synchronizer in fake mode which avoids up- or downloading files to and from Dropbox.
# This is meant as testMode for the filter settings (optional, defaults to false)
#dropbox:fakemode=

# the up- and download interval as Cron-Expression. See the Quartz-Tutorial
# http://quartz-scheduler.org/documentation/quartz-2.x/tutorials/tutorial-lesson-06
# for more information on how to use them best (optional, defaults to '0 0/5 * * * ?'
# which means every 5 minutes)
#dropbox:uploadInterval=
#dropbox:downloadInterval=

# the AppKey, AppSecret combination (optional, defaults to official Dropbox-App
# Key-Secret-Combination)
#dropbox:appkey=
#dropbox:appsecret=

# defines the mode how files are synchronized with dropbox. Valid SyncModes are
# 'DROPBOX_TO_LOCAL', 'LOCAL_TO_DROPBOX' and 'BIDIRECTIONAL' (optional, defaults
# to 'LOCAL_TO_DROPBOX')
#dropbox:syncmode=

# the base directory to synchronize with openHAB, configure 'filter' to select
# files (optional, defaults to '.')
#dropbox:contentdir=

# defines a comma separated list of regular expressions which matches the 
# filenames to upload to Dropbox (optional, defaults to '/configurations/.*,
# /logs/.*, /etc/.*')
#dropbox:uploadfilter=

# defines a comma separated list of regular expressions which matches the 
# filenames to download from Dropbox (optional, defaults to '/configurations/.*')
#dropbox:downloadfilter=

############################# MaryTTS configuration ###################################
#
# the default voice used by the MaryTTS engine. Available voices are: bits1-hsmm 
# (german, female), bits3-hsmm (german, male), cmu-slt-hsmm (english, male) (optional,
# defaults to the systems' default voice or the first available voice)
#marytts:voice=


####################################################################################### 
#####                      Persistence configurations                             #####
####################################################################################### 

######################## Open.Sen.se Persistence Service ##############################
#
# the url of the Open.Sen.se public api (optional, defaults to 
# 'http://api.sen.se/events/?sense_key=') 
#sense:url=

# the Open.Sen.se API-Key for authentication (generated on the Open.Sen.se website)
#sense:apikey=

######################### Logging Persistence Service #################################
#
# the logback encoder pattern to use to write log entries
# see http://logback.qos.ch/manual/layouts.html#ClassicPatternLayout for all options
# the item name is available as the "logger" name, the state as the "msg"
logging:pattern=%date{ISO8601} - %-25logger: %msg%n

########################### Db4o Persistence Service ##################################
#
# the backup interval as Cron-Expression (optional, defaults to '0 0 1 * * ?' 
# which means every morning at 1 o'clock)
#db4o:backupinterval=
	
# the commit interval in seconds (optional, default to '5')
#db4o:commitinterval=

# the amount of backup files allowed in DB_FOLDER_NAME (optional, defaults
# to '7')
#db4o:maxbackups=

############################ SQL Persistence Service ##################################
# the database url like 'jdbc:mysql://<host>:<port>/<user>'
mysql:url=jdbc:mysql://myhost:3306/openhab

# the database user
mysql:user=openhab

# the database password
mysql:password=

#mysql:sqltype.group=VARCHAR(5)
#mysql:sqltype.switch=VARCHAR(5)
#mysql:sqltype.string=VARCHAR(20000)
#mysql:sqltype.datetime=DATETIME

# the reconnection counter
mysql:reconnectCnt=10

# the connection timeout (in seconds)
mysql:waitTimeout=3600

############################ Cosm Persistence Service #################################
#
# the url of the Cosm feed (optional, defaults to 'http://api.cosm.com/v2/feeds/') 
#cosm:url=

# the Cosm API-Key for authentication (generated on the Cosm website)
#cosm:apikey=

############################ GCal Persistence Service #################################
#
# the username and password for Google Calendar Account
#gcal-persistence:username=
#gcal-persistence:password=

# the url of the calendar feed
#gcal-persistence:url=

# the offset (in days) new calendar entries will be created in future (optional,
# defaults to 14)
#gcal-persistence:offset=

# the base script which is written to the newly created Calendar-Events by
# the GCal-based presence simulation. It must contain two format markers '%s'.
# The first marker represents the Item to send the command to and the second
# represents the State (optional, defaults to 
# '> if (PresenceSimulation.state == ON) sendCommand(%s,%s)')
#gcal-persistence:executescript=

################################# MQTT Persistence #########################################
#
# Name of the broker as defined in the section MQTT Transport
# mqtt-persistence:broker=

# The MQTT topic to which the persistence messages should be sent.
# mqtt-persistence:topic=

# A string representing the persistence message content.
# mqtt-persistence:message=

############################ MongoDB Persistence Service ##################################
# the database url
#mongodb:url=

# the database name
#mongodb:database=

# the collection name
#mongodb:collection=


############################ InfluxDB Persistence Service #############################
# The database URL, e.g. http://127.0.0.1:8086 or https://127.0.0.1:8084 . 
# Defaults to: http://127.0.0.1:8086
# influxdb:url=http(s)://<host>:<port>

# The name of the database user, e.g. openhab.
# Defaults to: openhab
# influxdb:user=<user>

# The password of the database user.
# influxdb:password=

# The name of the database, e.g. openhab.
# Defaults to: openhab
# influxdb:db=<database>


#######################################################################################
#####                       Transport configurations                              #####
#######################################################################################

################################# MQTT Transport ######################################
#
# Define your MQTT broker connections here for use in the MQTT Binding or MQTT
# Persistence bundles. Replace <broker> with a id you choose.
#

mqtt:space.url=tcp://myhost:1883
#mqtt:space.clientId="openhab"
mqtt:space.qos=1
mqtt:space.retain=true

# URL to the MQTT broker, e.g. tcp://localhost:1883 or ssl://localhost:8883
#mqtt:<broker>.url=tcp://<host>:1883

# Optional. Client id (max 23 chars) to use when connecting to the broker.
# If not provided a default one is generated.
#mqtt:<broker>.clientId=<clientId>

# Optional. User id to authenticate with the broker.
# mqtt:<broker>.user=<user>

# Optional. Password to authenticate with the broker.
#mqtt:<broker>.pwd=<password>

# Optional. Set the quality of service level for sending messages to this broker. 
# Possible values are 0 (Deliver at most once),1 (Deliver at least once) or 2 
# (Deliver exactly once). Defaults to 0.
#mqtt:<broker>.qos=<qos>

# Optional. True or false. Defines if the broker should retain the messages sent to
# it. Defaults to false.
#mqtt:<broker>.retain=<retain>

# Optional. True or false. Defines if messages are published asynchronously or
# synchronously. Defaults to true.
#mqtt:<broker>.async=<async>

# Optional. Defines the last will and testament that is sent when this client goes offline
# Format: topic:message:qos:retained <br/>
#mqtt:<broker>.lwt=<last will definition>



#######################################################################################
#####                        Binding configurations                               #####
#######################################################################################

################################ KNX Binding ##########################################
#
# KNX gateway IP address 
# (optional, if serialPort or connection type 'ROUTER' is specified)
#knx:ip=

# KNX IP connection type. Could be either TUNNEL or ROUTER (optional, defaults to TUNNEL)
# Note: If you cannot get the ROUTER mode working (even if it claims it is connected), 
# use TUNNEL mode instead with setting both the ip of the KNX gateway and the localIp.
#knx:type=

# KNX gateway port (optional, defaults to 3671)
#knx:port=

# Local endpoint to specify the multicast interface, no port is used (optional)
#knx:localIp=

# Serial port of FT1.2 KNX interface (ignored, if ip is specified)
# Valid values are e.g. COM1 for Windows and /dev/ttyS0 or /dev/ttyUSB0 for Linux
#knx:serialPort=

# Pause in milliseconds between two read requests on the KNX bus during
# initialization (optional, defaults to 50)
#knx:pause=

# Timeout in milliseconds to wait for a response from the KNX bus (optional, 
# defaults to 10000)
#knx:timeout

# Number of read retries while initialization items from the KNX bus (optional,
# defaults to 3)
#knx:readRetries

# Seconds between connect retries when KNX link has been lost
# 0 means never retry, it will only reconnect on next write or read request
# Note: without periodic retries all events will be lost up to the next read/write
#       request
# (optional, default is 0)
#knx:autoReconnectPeriod=30

############################# Bluetooth Binding #######################################
#
# Bluetooth refresh rate in seconds 
# (defines, how often a new device detection scan is performed)
#bluetooth:refresh=20

############################## OneWire Binding ########################################
#
# OwServer IP address 
#onewire:ip=

# OwServer Port (optional, defaults to 4304)
#onewire:port=

# refresh interval in milliseconds (optional, defaults to 60000)
#onewire:refresh=

# the retry count in case no valid value was returned 
# upon read (optional, defaults to 3)
#onewire:retry=

# defines which temperature scale owserver should return temperatures in. Valid
# values are CELSIUS, FAHRENHEIT, KELVIN, RANKIN (optional, defaults to CELSIUS).
#onewire:tempscale=

########################### NetworkHealth Binding #####################################
#
# Default timeout in milliseconds if none is specified in binding configuration
# (optional, default to 5000)
#networkhealth:timeout=

# refresh interval in milliseconds (optional, default to 60000)
#networkhealth:refresh=

############################### HTTP Binding ##########################################
#
# timeout in milliseconds for the http requests (optional, defaults to 5000)
#http:timeout=10000

# the interval in milliseconds when to find new refresh candidates
# (optional, defaults to 1000)
#http:granularity=

# configuration of the first cache item
# http:<id1>.url=
# http:<id1>.updateInterval=

# configuration of the second cache item  
# http:<id2>.url=
# http:<id2>.updateInterval=

http:spaceApi.url=https://int.bckspc.de/spacestatus.php
http:spaceApi.updateInterval=60000

############################# Fritz!Box Binding #######################################
#
# Please note: To be able to connect to the monitor port, the "CallMonitor" must be
# activated by dialing "#96*5*" once on a telephone that is connected to the Fritz!Box.

# IP address of Fritz!Box to connect to
#fritzbox:ip=fritz.box

############################### Asterisk Binding ######################################
#
# Please note: The Asterisk Management Interface (AMI) has to be activated in the
# manager.conf file of your Asterisk PBX.

# hostname of the AMI
#asterisk:host=

# the username and password to login to the AMI
#asterisk:username=
#asterisk:password=

################################ NTP Binding ##########################################
#
# refresh interval in milliseconds (optional, defaults to 900000 [15 minutes])
#ntp:refresh=

# the hostname of the timeserver
ntp:hostname=ptbtime1.ptb.de

################################ MPD Binding ##########################################
#
# Host and port of the first MPD to control 
# mpd:<player-id-1>.host=
# mpd:<player-id-1>.port=

# The password to authenticate against the MPD server (optional, can be null to
# indicate that no authentication is required)
# mpd:<player-id-1>.password=

# Host and port of the second MPD to control 
# mpd:<player-id-2>.host=
# mpd:<player-id-2>.port=

# The password to authenticate against the MPD server (optional, can be null to
# indicate that no authentication is required)
# mpd:<player-id-2>.password=

#mpd:hackcenter.host=mpd.hackcenter
#mpd:hackcenter.port=6600

################################ VDR Binding ##########################################
#
# Host and port of the first VDR to control 
# vdr:<vdr-id-1>.host=
# vdr:<vdr-id-1>.port=6419

# Host and port of the second VDR to control 
# vdr:<vdr-id-2>.host=
# vdr:<vdr-id-2>.port=6419

################################ SNMP Binding #########################################
#
# Listening Port (optional, defaults to '162')
#snmp:port=

# The SNMP community to listen to (optional, defaults to 'public')
#snmp:community=

# The SNMP retry timeout (in milliseconds). Defaults to 1500.
# Sets the number of milliseconds between retries.
#snmp:timeout=

# The SNMP number of retries. Defaults to 0.
# Sets the number of retries before aborting the request.
#snmp:retries=

######################## Novelan (Siemens) Heatpump Binding ###########################
#
# IP address of the Novelan (Siemens) Heatpump to connect to
#novelanheatpump:ip=

# refresh interval in milliseconds (optional, defaults to 60000)
#novelanheatpump:refresh=

############################### Cups Binding ##########################################
#
# CupsServer IP address or Host name
#cups:host=

# CupsServer Port (optional, defaults to 631)
#cups:port=

# refresh interval in milliseconds (optional, defaults to 60000)
#cups:refresh=

############################ IHC / ELKO LS Binding ####################################
#
# Controller IP address
#ihc:ip=

# Username and password for Controller
#ihc:username=
#ihc:password=

# Timeout for controller communication
#ihc:timeout=5000

############################## Plugwise Binding #######################################
#
# "stick" is reserved plug wise id
#plugwise:stick.port=
# interval in ms to wait between messages sent on the ZigBee network
#plugwise:stick.interval=150

# "circleplus" is reserved plug wise id
#plugwise:circleplus.mac= 

#plugwise:<plugwise-id-1>.mac=

############################### Modbus Binding ########################################
#
# sets refresh interval to Modbus polling service. 
# Value in milliseconds (optional, defaults to 200)
#modbus:poll=

# host (mandatory)
#modbus:slave1.host=

# The data type, can be "coil" "discrete" "holding" "input"
#modbus:slave1.type=

# the TCP port (optional, defaults to '502')
#modbus:slave1.port=

# The slave id (optional, defaults to '1')
#modbus:slave1.id=

# The slave start address (optional, defaults to '0')
#modbus:slave1.start=

# The number of data item to read
# (optional, defaults to '0' - but set it to something meaningful)
#modbus:slave1.length=

############################### PLC Bus Binding #######################################
#
# PLCBus adapter serial port
#plcbus:port=

################################# DMX Binding #########################################
#
# The combined connection String, e.g. 'localhost:9010' (optional, defaults to
# 'localhost:9010' or 'localhost:9020' depending on the choosen connection type)
#dmx:connection=

############################### Philips Hue Binding ###################################
#
# IP address of Hue Bridge (optional, default is auto-discovery)
#hue:ip=

# Default secret key for the pairing of the Philips Hue Bridge.
# It has to be between 10-40 (alphanumeric) characters 
# This may be changed by the user for security reasons.
hue:secret=openHABRuntime

################################ RFXCOM Binding #######################################
#
# Serial port of RFXCOM interface
# Valid values are e.g. COM1 for Windows and /dev/ttyS0 or /dev/ttyUSB0 for Linux
#rfxcom:serialPort=

# Set mode command for controller (optional)
# E.g. rfxcom:setMode=0D000000035300000C2F00000000 
#rfxcom:setMode=

############################## Pulseaudio Binding #####################################
#
# PulseaudioServer IP address 
#pulseaudio:Main.host=

# PulseaudioServer Port (optional, defaults to 4712)
#pulseaudio:Main.port=

############################### Homematic Binding #####################################
#
# Hostname / IP address of the Homematic CCU
homematic:host=homematic

# The communication with the CCU. xml for xmlrpc or bin for the lightweight binrpc, (optional, default is bin).
# homematic:rpc=

# Hostname / IP address for the callback server (optional, default is auto-discovery)
# This is normally the IP / hostname of the local host (but not "localhost" or "127.0.0.1"). 
# homematic:callback.host=

# Port number for the callback server. (optional, default is 9123)
# homematic:callback.port=

# The interval in seconds to check if the communication with the CCU is still alive.
# If no message receives from the CCU, the binding restarts. (optional, default is 300)
# homematic:alive.interval=

################################ Koubachi Binding #####################################
#
# refresh interval in milliseconds (optional, defaults to 900000ms, 15m)
#koubachi:refresh

# The URL of the Device list  (optional, defaults to 
# 'https://api.koubachi.com/v2/user/smart_devices?user_credentials=%1$s&app_key=%2$s')
#koubachi:deviceurl

# The URL of the Plant list  (optional, defaults to 
# 'https://api.koubachi.com/v2/plants?user_credentials=%1$s&app_key=%2$s')
#koubachi:planturl

# The URL for care actions  (optional, defaults to
# 'https://api.koubachi.com/v2/plants/%3$s/tasks?user_credentials=%1$s&app_key=%2$s')
#koubachi:tasksurl

# The single access token configured at http://labs.kpubachi.com
#koubachi:credentials

# The personal appKey configured at http://labs.koubachi.com
#koubachi:appkey

################################ Sonos Binding ########################################
#
# Host and port of the first VDR to control 
#sonos:office.udn=RINCON_000XXXXXXXXX01400
#sonos:living.udn=RINCON_000YYYYYYYYY01400
#sonos:pollingPeriod=2000

################################ SAMSUNG TV Binding ###################################
#
# Host of the first TV to control 
# samsungtv:<TVid1>.host=
# Port of the TV to control (optional, defaults to 55000)
# samsungtv:<TVid1>.port=

# Host of the second TV to control 
# samsungtv:<TVid2>.host=
# Port of the TV to control (optional, defaults to 55000)
# samsungtv:<TVid2>.port=

################################# Onkyo  Binding ######################################
#
# Host of the first Onkyo device to control 
onkyo:lounge.host=onkyo.core.bckspc.de

# Port of the Onkyo to control (optional, defaults to 60128)
# onkyo:<OnkyoId1>.port=

# Host of the second Onkyo device to control 
# onkyo:<OnkyoId2>.host=
# Port of the Onkyo to control (optional, defaults to 60128)
# onkyo:<OnkyoId2>.port=

################################ OpenSprinkler Binding ################################
#
# The type of OpenSprinkler connection to make (optional, defaults to 'gpio').
# There are two valid options:
#
# gpio: this mode is only applicable when running openHAB on a Raspberry Pi, which 
#       is connected directly to an OpenSprinkler Pi. In this mode the communication
#       is directly over the GPIO pins of the Raspberry Pi
# http: this mode is applicable to both OpenSprinkler and OpenSprinkler Pi, as long as
#       they are running the interval program. Realistically though if you have an
#       OpenSprinkler Pi, it makes more sense to directly connect via gpio mode.
# openSprinkler:mode=

# If the http mode is used, you need to specify the url of the internal program,
# and the password to access it. By default the password is 'opendoor'.
# openSprinkler:httpUrl=http://localhost:8080/
# openSprinkler:httpPassword=opendoor

# The number of stations available. By default this is 8, but for each expansion board
# installed this number will can be incremented by 8 (optional, defaults to 8).
# openSprinkler:numberOfStations=

############################ Epson Projector Binding ##################################
#
# Serial port or Host and port of the first Epson projector to control 
# epsonprojector:<devId1>.serialPort=
# epsonprojector:<devId1>.host=
# Port of the Epson projector to control (optional, defaults to 60128)
# epsonprojector:<devId1>.port=

# Serial port or Host and port of the second Epson projector to control 
# epsonprojector:<devId2>.serialPort=
# epsonprojector:<devId2>.host=
# Port of the Epson projector to control (optional, defaults to 60128)
# epsonprojector:<devId2>.port=

################################# Zehnder ComfoAir ####################################
#
# Serial port of the Zehnder ComfoAir to connect to
#comfoair:port=/dev/ttyS0

# refresh interval in milliseconds (optional, defaults to 60000)
#comfoair:refresh=

############################### EDS OWSever Binding ###################################
#
# Host of the first OWServer device to control 
# owserver:<serverId1>.host=

# Host of the second OWServer device to control 
# owserver:<serverId2>.host=

################################ digitalSTROM Binding #################################
#
# URI of the digitalSTROM server (dSS)
# digitalstrom:uri=https://dss.local:8080

# Connect timeout (defaults to 4000 ms)
#digitalstrom:connectTimeout=

# Connect timeout (defaults to 10000 ms)
#digitalstrom:readTimeout=

# to login without a user and password; loginToken must be enabled once
#digitalstrom:loginToken=

# to login with username and password; default user is dssadmin and default password
# is dssadmin if you have loginToken and username with password the loginToken will 
# be prefered by default
#digitalstrom:user=
#digitalstrom:password=

################################## Squeezebox Binding #################################
#
# Host address of your Logitech Media Server
#squeeze:<serverId>.host=
# Port of cli interface of your Logitech Media Server 
# (optional, defaults to 9090)
#squeeze:<serverId>.cliport=
# Webport interface of the your Logitech Media Server 
# (optional, defaults to 9000)
#squeeze:<serverId>.webport=

# Language used by squeezeboxSpeak as used by google ttl (en, de, fr,...) 
# You can hear result in your browser with this link : 
# http://translate.google.com/translate_tts?tl=en&q=hello
# (defaults to en)
#squeeze:language=

# Id (MAC address) of your first Squeezebox
#squeeze:<boxId1>.id=
# Id (MAC address) of your nth Squeezebox
#squeeze:<boxIdN>.id=

################################### Milight Binding ###################################
#
# Host of the first Milight bridge to control 
#milight:<MilightId1>.host=
# Port of the bridge to control (optional, defaults to 50000)
#milight:<MilightId1>.port=
#
# Host of the second Milight bridge to control 
#milight:<MilightId2>.host=
# Port of the bridge to control (optional, defaults to 50000)
#milight:<MilightId2>.port=

############################### Systeminfo Binding ####################################
#
# Interval in milliseconds when to find new refresh candidates
# (optional, defaults to 1000)
#systeminfo:granularity=

# Data Storage Unit, where B=Bytes, K=kB, M=MB, T=TB (optional, defaults to M)
#systeminfo:units=

################################### PiFace Binding ####################################
#
# Watchdog polling interval (optional, defaults to 60000)
#piface:watchdog.interval=

# Host of the first Raspberry PI carrying a PiFace board 
#piface:<piface-id1>.host=
# Port of the Piface listener of the first RasPi (optional, defaults to 15432)
#piface:<piface-id1>.listenerport=
# Port of the Piface monitor of the first RasPi (optional, defaults to 15433)
#piface:<piface-id1>.monitorport=
# Socket timeout when sending packets to the first RasPi (optional, defaults to 1000ms)
#piface:<piface-id1>.sockettimeout=
# Number of retry attempts before failing a packet for the first RasPi (optional, defaults to 3)
#piface:<piface-id1>.maxretries=


############################# Fritz AHA Binding #######################################
#
# refresh interval in milliseconds (optional, defaults to 10000)
#fritzaha:refresh=

# Binding supports multiple AHA hosts (e.g. FRITZ!Box, Fritz!Powerline 546E). Format is
# fritzaha:<hostID>.<option>=<value>, where hostID is up to user choice

# Host name of the first AHA host (e.g. fritz.box)
#fritzaha:<hostID1>.host=
# Port of the first AHA host (optional, defaults to protocol-specific default port)
#fritzaha:<hostID1>.port=
# Protocol to connect to web interface. Supports https and http.
# Use of https requires SSL certificate to be trusted by the JRE.
# (optional, defaults to http)
#fritzaha:<hostID1>.protocol=
# Username of the first AHA host. User must have HomeAuto permissions.
# (optional for local networks, required for remote access)
#fritzaha:<hostID1>.username=
# Password of the first AHA host's web interface. 
# (optional, but required if password is set in host)
#fritzaha:<hostID1>.password=
# timeout for synchronous http-connections (optional, default 2000)
#fritzaha:<hostID1>.synctimeout=
# timeout for asynchronous http-connections (optional, default 4000)
#fritzaha:<hostID1>.asynctimeout=

############################## Tinkerforge  Binding ###################################
#
# IP addresses / Hostnames  of the hosts running the brickd (optional port 
# separated by a colon, defaults to 4223) 
# tinkerforge:hosts=

######################## NIBE HEAT PUMP Binding #######################################
#
# UDP port of the Heatpump Monitor (optional, defaults to 9999)
#nibeheatpump:udpPort=

# Switch on the Nibe HeatPump Simulator (for testing purpose only)
#nibeheatpump:simulate=true

################################ Z-Wave  Binding ######################################
#
# The Z-Wave controller port. Valid values are e.g. COM1 for Windows and /dev/ttyS0 or
# /dev/ttyUSB0 for Linux
#zwave:port=

# Z-Wave nightly heal time. This is the hour (eg 2AM) at which the automatic nightly
# network heal will be performed.
#zwave:healtime=2

################################ Nikobus Binding ######################################
#
# Serial Port connected to pc-link. Valid values are e.g. COM1 for Windows and /dev/ttyS0 or
# /dev/ttyUSB0 for Linux
#nikobus:serial.port=

# Directory path where the command cache file should be created.  
# Optional. Defaults to the users' home directory.
#nikobus:cache.location=

# Perform a module status query every x seconds (optional, defaults to 600 (10 minutes)). 
#nikobus:refresh=

################################# EnOcean Binding #####################################
#
# EnOcean USB adapter serial port
#enocean:serialPort=

################################# TCP - UDP Binding ###################################
#
# all parameters can be applied to both the TCP and UDP binding unless 
# specified otherwise

# Port to listen for incoming connections
#tcp:port=25001

# Cron-like string to reconnect remote ends, e.g for unstable connection or remote ends
#tcp:reconnectron='0 0 0 * * ?'

# Interval between reconnection attempts when recovering from a communication error, 
# in seconds
#tcp:retryinterval=5

# Queue data whilst recovering from a connection problem (TCP only)
#tcp:queue=true

# Maximum buffer size whilst reading incoming data
#tcp:buffersize=1024

# Share connections within the Item binding configurations
#tcp:itemsharedconnections=true

# Share connections between Item binding configurations
#tcp:bindingsharedconnections=true

# Share connections between inbound and outbound connections
#tcp:directionssharedconnections=false

# Allow masks in ip:port addressing, e.g. 192.168.0.1:* etc
#tcp:addressmask=true

# Pre-amble that will be put in front of data being sent
#tcp:preamble=''

# Post-amble that will be appended to data being sent
#tcp:postamble='\r\n'

# Perform all write/read (send/receive) operations in a blocking mode, e.g. the binding
# will wait for a reply from the remote end after data has been sent
#tcp:blocking=false

# timeout, in milliseconds, to wait for a reply when initiating a blocking write/read
#  operation
#tcp:timeout=3000

# Update the status of Items using the response received from the remote end (if the
# remote end sends replies to commands)
#tcp:updatewithresponse=true

# Timeout - or 'refresh interval', in milliseconds, of the worker thread
tcp:refreshinterval=250

# Timeout, in milliseconds, to wait when "Selecting" IO channels ready for communication
#tcp:selecttimeout=1000

# Used character set
#tcp:charset=ASCII

################################# Mqttitude Binding ###################################
#
# Mqttitude can track your presence in two ways;
#
#  1. Regions - by defining a region in your Mqttitude app (on your phone) you specify
#               a set of lat/lon coordinates, a geofence, and a name - by using this name 
# 				in your item binding openHAB will listen for enter/leave events for this 
#               region and thus allow you to track your presence in multiple locations
#  2. Home    - by defining the lat/lon of your home, along with a geofence radius (below), 
#               the binding will listen for location publishes from the Mqttitude app and 
#               manually calculate the distance from your 'home'
#
# Optional. The latitude/longitude coordinates of 'home'. 
#mqttitude:home.lat=
#mqttitude:home.lon=

# Optional. The geofence radius.
#mqttitude:geofence=

############################### OpenPaths Binding #####################################
#
# The latitude/longitude coordinates of 'home'.
#openpaths:home.lat=
#openpaths:home.long

# Interval in milliseconds to poll for user location (optional, defaults to 5mins).
#openpaths:refresh=

# Distance in metres a user must be from 'home' to be considered inside the 
# geofence (optional, defaults to 100m). 
#openpaths:geofence=

# OpenPaths access/secret keys for each user.
#openpaths:<name>.accesskey=<accesskey>
#openpaths:<name>.secretkey=<secretkey>

######################## Swegon ventilation Binding ###################################
#
# UDP port (optional, defaults to 9998)
#swegonventilation:udpPort=

# Switch on the Swegon Simulator (for testing purpose only)
#swegonventilation:simulate=true

############################### Pioneer AVR Binding ###################################
#
# Hostname/IP of the first Pioneer device to control
#pioneeravr:livingroom.host=

# Portnumber of the Pioneer device to control (optional, defaults to 23)
#pioneeravr:livingroom.port=

# Switch for disabling the connection check (optional, defaults to 1)
#pioneeravr:livingroom.checkconn=

################################ Heatmiser Binding ####################################
#
# Refresh interval in milliseconds (optional, defaults to 2000ms)
#heatmiser:refresh

# Set the heatmiser network address
#heatmiser:address=

# Set the port number for the Heatmiser interface
#heatmiser:port=

################################ NeoHub Binding #######################################
#
# Refresh interval in milliseconds (optional, defaults to 60000ms)
#neohub:refresh=60000

# Set the NeoHub network address
#neohub:hostname=

# Set the port number for the NeoHub interface (optional, defaults to 4242)
#neohub:port=4242

########################### Open Energy Monitor Binding ###############################
#
# UDP port of the Open Energy Monitor devices (optional, defaults to 9997)
#openenergymonitor:udpPort=9997

# For testing purposes
#openenergymonitor:simulate=true

################################ Netatmo Binding ######################################
#
# Refresh interval in milliseconds (optional, defaults to 300000)
#netatmo:refresh=

# The Netatmo client id (see http://dev.netatmo.com/dev/listapps)
#netatmo:clientid=

# The Netatmo client secret (see http://dev.netatmo.com/dev/listapps)
#netatmo:clientsecret=

# The Netatmo refresh token (see http://dev.netatmo.com/doc/authentication/usercred)
#netatmo:refreshtoken=

########################### HDanywhere Binding ########################################
#
# Optional, specify the number of input and output ports for a given HDanywhere matrix
#hdanywhere:192.168.0.88.ports=4

################################# Omnilink ############################################
#
# Enter the port (4369) host ip or name and the two crypto keys for your omni panel.
# The two keys may be found in the installer menu on a HAI keypad or touchscreen. Each
# key is 16 hex characters in pairs separated by colons (aa:bb:cc)
#
# Ff generateItems is set to true then the binding will print all known items and a
# sample sitemap to the log file (INFO).  Useful when setting up for the first time.
#
#omnilink:port=4369
#omnilink:host=panel.yourdomain.com
#omnilink:key1=00:AA:BB:CC:DD:EE:FF:11
#omnilink:key2=00:AA:BB:CC:DD:EE:FF:11
#omnilink:generateItems=true

####################### Freeswitch Action configuration ###############################
#
# Host or ip of your freeswitch server
#freeswitch:host=

# Port that your freeswitch server is listening for ESL connections on
# (optional, defaults to 8021) 
#freeswitch:port=

# Password set for ESL connections
#freeswitch:password=

################################ MAX!Cube Binding #####################################
#
# MAX!Cube LAN gateway IP address 
# maxcube:ip=192.168.0.222

# MAX!Cube port (Optional, default to 62910)
# maxcube:port=62910

# MAX!Cube refresh interval in ms (Optional, default to 10000)
# maxcube:refreshInterval=10000

################################# IRtrans #############################################
#
# Timeout - or 'refresh interval', in milliseconds, of the worker thread
# (mandatory parameter to enable the IRtrans binding)
#irtrans:refreshinterval=250

# Timeout, in milliseconds, to wait for a reply when sending a command (default is 1000)
#irtrans:timeout=3000

############################### Daikin Binding ########################################
#
# Require a KKRP01A Online Controller and a Daikin heat pump.

# Refresh interval in milliseconds (optional, defaults to 60000)
#daikin:refresh=

# Daikin Online Controller - host address and optional username/password
# NOTE: currently the username/password are ignored - you must configure
#       the KKRP01A with no security - i.e. empty password for all logins 
#daikin:<id>.host=
#daikin:<id>.username=
#daikin:<id>.password=

################################# Astro Binding #######################################
#
# The latitude
astro:latitude=49.901949

# The longitude
astro:longitude=10.892937

# Refresh interval for azimuth and elevation calculation in seconds
# (optional, defaults to disabled)
astro:interval=3600

############################### Insteon PLM Binding ###################################
#
# The insteon PLM controller port. Valid values are e.g. COM1 for Windows and
# /dev/ttyS0 or /dev/ttyUSB0 for Linux. Using multiple modems is possible, but has never
# been tested.
# Use multiple modems at your own peril.
#
#insteonplm:port_0=/dev/insteon

# poll interval (optional, in milliseconds, defaults to 300000).
# Poll too often and you will overload the insteon network,
# leading to sluggish or no response when trying to send messages to devices.
# The default poll interval of 300s has been tested and found to be a good
# compromise in a configuration of about 110 switches/dimmers.
#
#insteonplm:poll_interval=300000

# refresh value (optional, in milliseconds, defaults to 15000)
# The refresh interval is not critical, since only device statistics are logged
# upon refresh (the polling operates under different timers).
#
#insteonplm:refresh=15000

################################ K8055 Binding #########################################
#
# refresh interval in milliseconds (optional, defaults to 1000ms)
#k8055:refresh=1000

# Board Number.  Defaults to 0
#k8055:boardno=0

############################## Withings Binding #######################################
#
# Data refresh interval in ms (optional, defaults to 60000)
#withings:refresh=


#############################  IEC 620562-21 Meter Binding ############################
#
# the serial port to use for connecting to the metering device e.g. COM1 for Windows
# and /dev/ttyS0 or /dev/ttyUSB0 for Linux
#iec6205621meter:<meter-id1>.serialPort=/dev/ttyS0

# Delay of baud rate change in ms. Default is 0. USB to serial converters often 
# require a delay of up to 250ms default is 0ms
#iec6205621meter:<meter-id1>.baudRateChangeDelay=

# Enable handling of echos caused by some optical tranceivers
# default is true
#iec6205621meter:<meter-id1>.echoHandling=true

# Perform a module status query every x miliseconds (optional, defaults to 60000)
#iec6205621meter:refresh=

################################# GPIO Binding #####################################

# Optional directory path where "sysfs" pseudo file system is mounted, when isn't
# specified it will be determined automatically if "procfs" is mounted
#gpio:sysfs=/sys

# Optional time interval in miliseconds when pin interrupts are ignored to
# prevent bounce effect, mainly on buttons. Global option for all pins, can be
# overwritten per pin in item configuration. Default value if omitted: 0
#gpio:debounce=10


############################## Waterkotte EcoTouch Binding ############################
#
# Data refresh interval in ms (optional, defaults to 60000)
#ecotouch:refresh=

# The IP address of the Waterkotte EcoTouch display unit (required)
#ecotouch:ip=

# These are the login credentials (required).
# There is no way to change them at the EcoTouch display unit (as far as I know).
#ecotouch:username=admin
#ecotouch:password=wtkadmin