climateR seeks to simplifiy the steps needed to get climate data into
R. It currently provides access to the following gridded climate sources
using a single parmaeter
| Number | Dataset | Description | Dates |
|---|---|---|---|
| 1 | GridMET | Gridded Meteorological Data. | 1979 - Yesterday |
| 2 | Daymet | Daily Surface Weather and Climatological Summaries | 1980 - 2019 |
| 3 | TopoWX | Topoclimatic Daily Air Temperature Dataset | 1948 - 2016 |
| 4 | PRISM | Parameter-elevation Regressions on Independent Slopes | 1981 - (Yesterday-1) |
| 5 | MACA | Multivariate Adaptive Constructed Analogs | 1950 - 2099 |
| 6 | LOCA | Localized Constructed Analogs | 1950 - 2100 |
| 7 | BCCA | Bias Corrected Constructed Analogs | 1950 - 2100 |
| 8 | BCSD | Bias Corrected Spatially Downscaled VIC: Monthly Hydrology | 1950 - 2099 |
| 9 | TerraClimate | TerraClimate Monthly Gridded Data | 1958 - 2019 |
| 10 | TerraClimate Normals | TerraClimate Normals Gridded Data | Monthly for 1961-1990, 1981-2010, 2C & 4C |
| 11 | CHIRPS | Climate Hazards Group InfraRed Precipitation with Station | 1980 - Current month |
| 12 | EDDI | Evaporative Demand Drought Index | 1980 - Current year |
remotes::install_github("mikejohnson51/AOI") # suggested!
remotes::install_github("mikejohnson51/climateR")library(AOI)
library(climateR)
library(sf)
library(raster)
library(rasterVis)The climateR package is supplemented by the AOI framework established in the AOI R package.
To get a climate product, an area of interest must be defined:
AOI = aoi_get(state = "NC")
plot(AOI$geometry)
Here we are loading a polygon for the state of North Carolina More examples of constructing AOI calls can be found here.
With an AOI, we can construct a call to a dataset for a parameter(s) and date(s) of choice. Here we are querying the PRISM dataset for maximum and minimum temperature on October 29, 2018:
system.time({
p = getPRISM(AOI, param = c('tmax','tmin'), startDate = "2018-10-29")
})
#> user system elapsed
#> 0.329 0.118 1.027r = raster::stack(p)
rasterVis::levelplot(r, par.settings = BuRdTheme, names.attr = names(p)) +
layer(sp.lines(as_Spatial(AOI), col="gray30", lwd=3))
climateR offers support for sf, sfc, and bbox objects. Here we
are requesting wind velocity data for the four corners region of the USA
by bounding coordinates.
AOI = st_bbox(c(xmin = -112, xmax = -105, ymax = 39, ymin = 34), crs = 4326) %>%
getGridMET(param = "wind_vel", startDate = "2018-09-01")
rasterVis::levelplot(AOI$gridmet_wind_vel, margin = FALSE, main = "Four corners Wind Velocity")
In addition to multiple variables we can request variables through time, here let’s look at the gridMET rainfall for the Gulf Coast during Hurricane Harvey:
harvey = getGridMET(aoi_get(state = c("TX", "FL")),
param = "prcp",
startDate = "2017-08-20", endDate = "2017-08-31")
levelplot(harvey$gridmet_prcp, par.settings = BTCTheme, main = "Hurricane Harvey")
Some sources are downscaled Global Climate Models (GCMs). These allow you to query forecasted ensemble members from different models and/or climate scenarios. One example is from the MACA dataset:
system.time({
m = getMACA(AOI = aoi_get(state = "FL"),
model = "CCSM4",
param = 'prcp',
scenario = c('rcp45', 'rcp85'),
startDate = "2080-06-29", endDate = "2080-06-30")
})
#> user system elapsed
#> 0.403 0.113 1.150r = raster::stack(m)
names(r) = paste(rep(names(m), each = 2), names(m[[1]]))
levelplot(r, par.settings = BTCTheme)
Getting multiple models results is also quite simple:
models = c("bnu-esm","canesm2", "ccsm4", "cnrm-cm5", "csiro-mk3-6-0")
temp = getMACA(AOI = aoi_get(state = "conus"),
param = 'tmin',
model = models,
startDate = "2080-11-29")
s = stack(temp)
s = addLayer(s, mean(s))
names(s) = c(models, "Ensemble Mean")
# Plot
rasterVis::levelplot(s, par.settings = rasterVis::BuRdTheme)
If
you don’t know your models, you can always grab a random set by
specifying a number:
random = getMACA(aoi_get(state = "MI"), model = 3, param = "prcp", startDate = "2050-10-29")
random = stack(random) %>% setNames(names(random))
levelplot(stack(random), par.settings = BTCTheme)
Not all datasets are USA focused either. TerraClimate offers global, monthly data up to the current year for many variables, and CHIRPS provides daily rainfall data:
kenya = aoi_get(country = "Kenya")
tc = getTerraClim(kenya, param = "prcp", startDate = "2018-01-01")
chirps = getCHIRPS(kenya, startDate = "2018-01-01", endDate = "2018-01-04" )
p1 = levelplot(tc$terraclim_prcp, par.settings = BTCTheme, main = "January 2018; TerraClim", margin = FALSE) +
layer(sp.lines(as_Spatial(kenya), col="white", lwd=3))
p2 = levelplot(chirps, par.settings = BTCTheme, main = "Janaury 1-4, 2018; CHIRPS", layout=c(2, 2)) +
layer(sp.lines(as_Spatial(kenya), col="white", lwd=3))
gridExtra::grid.arrange(p1,p2, nrow = 1)
This raises the question “what is available for each resource?”. This
can be checked in the appropriate meta_data objects. For example let’s
see what parameter data is offered for gridMET, and what models and
scenarios are offered for MACA.
head(param_meta$gridmet)
#> common.name call description timestep
#> 1 prcp pr precipitation_amount daily
#> 2 rhmax rmax daily_maximum_relative_humidity daily
#> 3 rhmin rmin daily_minimum_relative_humidity daily
#> 4 shum sph daily_mean_specific_humidity daily
#> 5 srad srad daily_mean_shortwave_radiation_at_surface daily
#> 6 wind_dir th daily_mean_wind_direction daily
#> units
#> 1 mm
#> 2 Percent
#> 3 Percent
#> 4 kg/kg
#> 5 W/m^2
#> 6 Degrees Clockwise from north
head(model_meta$maca)
#> model ensemble scenario
#> 1 BNU-ESM r1i1p1 rcp45
#> 2 CNRM-CM5 r1i1p1 rcp45
#> 3 CSIRO-Mk3-6-0 r1i1p1 rcp45
#> 4 bcc-csm1-1 r1i1p1 rcp45
#> 5 CanESM2 r1i1p1 rcp45
#> 6 GFDL-ESM2G r1i1p1 rcp45Finally, data gathering is not limited to areal extents and can be retrieved as a time series at locations.
AOI = AOI::geocode('Colorado Springs', pt = TRUE)
ts = getGridMET(AOI, param = 'srad', startDate = "2019-01-01", endDate = "2019-12-31")
ggplot(data = ts) +
aes(x = date, y = srad) +
geom_line() +
stat_smooth(col = "red") +
theme_linedraw() +
labs(title = "Solar Radiation: Colorado Springs 2019", x = "Date", y = "Solar Radiation")
future = getMACA(geocode("UCSB", pt = TRUE),
model = 5, param = "tmax",
startDate = "2050-01-01", endDate = "2050-01-31")
future_long = future %>%
dplyr::select(-source, -lat, -lon) %>%
tidyr::pivot_longer(-date)
ggplot(data = future_long, aes(x = date, y = value, col = name)) +
geom_line() +
theme_linedraw() +
scale_color_brewer(palette = "Dark2") +
labs(title = "UCSB Temperture: January, 2050",
x = "Date",
y = "Degree K",
color = "Model")
Extracting data for a set of points is an interesting challenge. It turns it is much more efficient to grab the underlying raster stack and then extract time series as opposed to iterating over the locations:
- Starting with a set of locations in Brazil:
(sites = read.csv('./inst/extdata/example.csv') %>%
st_as_sf(coords = c("long", "lat"), crs = 4326))
#> Simple feature collection with 100 features and 2 fields
#> Geometry type: POINT
#> Dimension: XY
#> Bounding box: xmin: -54.81975 ymin: -29.73627 xmax: -40.80975 ymax: -18.52627
#> Geodetic CRS: WGS 84
#> First 10 features:
#> X ID geometry
#> 1 190760 190760 POINT (-50.40975 -25.81627)
#> 2 267801 267801 POINT (-48.15975 -24.60627)
#> 3 219885 219885 POINT (-49.28975 -25.32627)
#> 4 200445 200445 POINT (-50.45975 -25.63627)
#> 5 74789 74789 POINT (-51.70975 -28.01627)
#> 6 18343 18343 POINT (-50.35975 -29.33627)
#> 7 143615 143615 POINT (-49.33975 -26.73627)
#> 8 588292 588292 POINT (-47.57975 -21.27627)
#> 9 371314 371314 POINT (-47.76975 -23.28627)
#> 10 638894 638894 POINT (-46.99975 -20.75627)climateRwill grab the RasterStack underlying the bounding area of the points
sites_stack = getTerraClim(AOI = sites,
param = "tmax",
startDate = "2018-01-01",
endDate = "2018-12-31")
plot(sites_stack$terraclim_tmax$X2018.01)
plot(sites$geometry, add = TRUE, pch = 16, cex = .5)
- Use
extract_sitesto extract the times series from these locations. Theidparameter is the unique identifier from the site data with which to names the resulting columns.
sites_wide = extract_sites(sites_stack, sites, "ID")
sites_wide$terraclim_tmax[1:5, 1:5]
#> date site_190760 site_267801 site_219885 site_200445
#> 1 2018-01-01 27.2 29.9 25.6 26.6
#> 2 2018-02-01 26.8 31.5 25.6 26.2
#> 3 2018-03-01 26.6 30.1 25.2 25.8
#> 4 2018-04-01 26.4 30.8 25.6 26.0
#> 5 2018-05-01 25.3 28.3 24.8 24.9To make the data ‘tidy’ simply pivot on the date column:
tmax = tidyr::pivot_longer(sites_wide$terraclim_tmax, -date)
head(tmax)
#> # A tibble: 6 x 3
#> date name value
#> <date> <chr> <dbl>
#> 1 2018-01-01 site_190760 27.2
#> 2 2018-01-01 site_267801 29.9
#> 3 2018-01-01 site_219885 25.6
#> 4 2018-01-01 site_200445 26.6
#> 5 2018-01-01 site_74789 27.7
#> 6 2018-01-01 site_18343 24.1
ggplot(data = tmax, aes(x = date, y = value, color = name, group = name)) +
scale_color_viridis_d() +
geom_line() +
theme_linedraw() +
theme(legend.position = "none") 
This is a relatively new function (01-18-2020) that has not been
extensively tested for how it scales with large requests. The aim is to
provide fast projection of climateR gridded output. For point data use
sf::st_transform. Starting with 2 days of precipitation data in 2080
from MACA:
cr = climateR::getMACA(
AOI::aoi_get(state = "conus"),
model = "CCSM4",
param = 'prcp',
startDate = "2080-06-29", endDate = "2080-06-30")
levelplot(cr$maca_ccsm4_prcp_rcp45_mm, par.settings = BTCTheme)
Lets transform the projection system from the native WGS84 to the projected CONUS Albers Equal Area (EPSG:5070).
system.time({ cr2 = fast_reproject(cr, target_prj = 5070) })
#> user system elapsed
#> 0.564 0.163 0.763
levelplot(cr2$maca_ccsm4_prcp_rcp45_mm, par.settings = BTCTheme)
climateR is written by Mike
Johnson, a graduate Student at the
University of California, Santa Barbara in
Keith C. Clarke’s Lab.