-
Notifications
You must be signed in to change notification settings - Fork 0
/
award.ini
159 lines (155 loc) · 11.6 KB
/
award.ini
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
[PostInfo]
; Ôàéë îïèñàíèÿ BIOS-à äëÿ ïðîãðàììû POST Info
pInfo=1.4
biosName=Award BIOS v4.5x/6.0
biosVer=1.2.1
Notes=Award Modular BIOS v4.50, 4.51, 4.60, 6.0, ÏÅÐÅÍÎÑ à òàêæå ò.í. "Phoenix Award BIOS 6.0PG". ÏÅÐÅÍÎÑ Ñì. http://icbook.com.ua/post/_award/index.html
; Award Modular BIOS v4.50, 4.51, 4.60, 6.0
; Ñóôôèêñû P è G îáîçíà÷àþò ñîîòâåòñòâåííî ïîääåðæêó Plug and play è ïîääåðæêó ôóíêöèé óïðàâëåíèÿ ïèòàíèåì (Green Function).
; http://icbook.com.ua/post/_award/index.html
[POSTs]
c0=Program chipset registers before POST. ÏÅÐÅÍÎÑ Ïîäãîòîâêà ðåãèñòðîâ ÷èïñåòà äëÿ ãðÿäóùåãî POST
c1=Auto-detection of onboard DRAM. ÏÅÐÅÍÎÑ Îïðåäåëåíèå ÎÇÓ
c3=Test the first 256K of DRAM. ÏÅÐÅÍÎÑ Expand the compressed codes into temporary DRAM area ÏÅÐÅÍÎÑ Ïðîâåðêà ïåðâûõ 256ÊÁ ÎÇÓ. Çàïèñü òåíåâîãî BIOS.
c5=Copy the BIOS from ROM into E0000-FFFFF shadow RAM so that POST will go faster ÏÅÐÅÍÎÑ Çàïèñü òåíåâîãî BIOS
c6=Cache presence test ÏÅÐÅÍÎÑ Òåñò íà íàëè÷èå êýøà
c8=Error on external segment XGroupCode ÏÅÐÅÍÎÑ ëèáî èñïîðòèëàñü ïðîøèâêà
cf=Using either the power-up CPU description or a hard-code value, ÏÅÐÅÍÎÑ determine the CPU type and put it in CMOS where it can be used later ÏÅÐÅÍÎÑ Îïðåäåëåíèå òèïà ÖÏ
01=The BIOS will set carry, zero, sign, and overflow flags, verify ÏÅÐÅÍÎÑ they are set, then turn each flag off and verify it is off
02=Read, write and verify all CPU registers except SS, SP, and BP with data pattern - FF and 00 ÏÅÐÅÍÎÑ Ïðîâåðêà ðåãèñòðîâ ÖÏ
03=Initialize Chips. Disable parity checking, DMA. Initialize ÏÅÐÅÍÎÑ timer, including set EISA timer to a known state. Initialize EISA extended registers ÏÅÐÅÍÎÑ Èíèöèàëèçàöèÿ ñóáêîìïîíåíòîâ ìàòåðèíñêîé ïëàòû
04=Test Memory Refresh Toggle ÏÅÐÅÍÎÑ Òåñò ðåãóëÿðíîãî îáíîâëåíèÿ ïàìÿòè (ïîääåðæàíèÿ å¸ â ðàáîòîñïîñîáíîñòè)
05=Keyboard Controller Self-Test. Enable Keyboard Interface. Blank CGA video ÏÅÐÅÍÎÑ Òåñò êîíòðîëëåðà êëàâèàòóðû, àêòèâàöèÿ îíîãî.
06=F000 shadow R/W test ÏÅÐÅÍÎÑ Òåñò òåíîâîãî BIOS.
07=Verifies CMOS is working correctly, and detects bad battery ÏÅÐÅÍÎÑ Òåñò àêêóìóëÿòîðà ÷àñîâ è CMOS
08=Clear and check parity on first 64k or 256k of memory ÏÅÐÅÍÎÑ Ïðîâåðêà ïåðâûõ 64ÊÁ èëè 256ÊÁ ÎÇÓ
09=Issue CPUID instruction to identify CPU type. Configuration ÏÅÐÅÍÎÑ register of IBM/Cyrix CPU according to the MODBINable Register Table ÏÅÐÅÍÎÑ Îïðåäåëåíèå òèïà ÖÏ
0a=Setup Interrupt Vector Table. Early Power Management initialization (OEM specific) ÏÅÐÅÍÎÑ Èíèöèàëèçàöèÿ òàáëèöû âåêòîðîâ ïðåðûâàíèÿ, ïîäãîòîâêà ñèñòåì óïðàâëåíèå ïèòàíèåì
0b=Verify CMOS checksum and battery. If it fails, or INS key pressed, load the manufacturing defaults ÏÅÐÅÍÎÑ Ïðîâåðêà êîíòðîëüíîé ñóììû CMOS. Òàêæå, åñëè íàæàòà êëàâèøà INSert, îñóù. ñáðîñ CMOS ê äåôîëòíûì íàñòðîéêàì.
0c=Initialization of the BIOS Data Area ëèáî Detect type of keyboard ÏÅÐÅÍÎÑ controller and setup NumLock (íå PnP áèîñ)
0d=Detect and Initialize Video Adapter. If no display device found, ÏÅÐÅÍÎÑ the speaker will beep. Program some of the Chipset's ÏÅÐÅÍÎÑ value ëèáî Init I/O and Local APIC. Init RPB Access BIOS Extension ÏÅÐÅÍÎÑ Îáíàðóæåíèå è èíèöèàëèçàöèÿ VideoBIOS.
0e=Test video RAM (if a MDA adapter is installed). Show Award Logo, Copyright string, ÏÅÐÅÍÎÑ Energy Star Logo, CPU brand, type and speed ÏÅÐÅÍÎÑ Âûâîä íà ýêðàí ñîîáùåíèé POST, ëîãîòèïà Energy Star, èíôîðìàöèè î ïðîöåññîðå è âåðñèè ïðîøèâêè BIOS.
0f=Check PS/2 Mouse Support. Test DMA Controller 0 ÏÅÐÅÍÎÑ Ïðîâåðêà íàëè÷èÿ ìûøåé äëÿ ïîðòà PS/2 è ðàáîòîñïîñîáíîñòè êîíòðîëëåðà DMA ¹0.
10=Test DMA Controller 1
11=Test DMA Page Registers
12=Test 8254 Channel 0
13=Test 8254 Channel 1
14=Test 8254 Channel 2
15=If not a warm boot, test 8259 interrupts mask bits for channel 1 ÏÅÐÅÍÎÑ Åñëè õîëîäíàÿ çàãðóçêà, ïðîâåðêà ìàñêè ïðåðûâàíèé 8259 äëÿ êàíàëà 1
16=If not a warm boot, test 8259 interrupts mask bits for channel 2 ÏÅÐÅÍÎÑ Åñëè õîëîäíàÿ çàãðóçêà, ïðîâåðêà ìàñêè ïðåðûâàíèé 8259 äëÿ êàíàëà 2
17=Test Stuck 8259's Interrupt Bits. Turn off interrupts then verify ÏÅÐÅÍÎÑ no interrupt mask register is on
18=Test 8259 Interrupt Functionality: force an interrupt and verify ÏÅÐÅÍÎÑ the interrupt occurred
19=Initialize RPB serial port
1a=Display CPU clock
1e=If EISA NVM checksum is good, execute EISA initialization. ÏÅÐÅÍÎÑ If bad, execute ISA Tests ÏÅÐÅÍÎÑ Ïðîâåðêà ISA.
1f=If EISA NVM checksum is good, execute EISA initializtion (EISA BIOS Only) ÏÅÐÅÍÎÑ Ïðîâåðêà è èíèöàëèçàöèÿ EISA.
26=Óñòàíîâêà ÷àñòîòû FSB. ÏÅÐÅÍÎÑ Âíèìàíèå! Åñëè Âû - ñ÷àñòëèâûé ÏÅÐÅÍÎÑ îáëàäàòåëü äåø¸âîé POST-êàðòû, ÏÅÐÅÍÎÑ òî íóæíî îáÿçàòåëüíî ó÷èòûâàòü, ÷òî îíà ÏÅÐÅÍÎÑ íå ïîêàçûâàåò POSTêîäû ïîñëå 26-ãî (èç-çà òîãî, ÏÅÐÅÍÎÑ ÷òî îíà íå PnP, BIOS å¸ îòêëþ÷àåò)
30=Find and display the size of base and extended memory. ÏÅÐÅÍÎÑ Program K5/K6 CPU's Write Allocation. Init I/O and Local APIC ÏÅÐÅÍÎÑ Âûâîä êîë-âà êèëîáàéò ÎÇÓ.
31=Test base memory from 256K to 640K and extended memory above 1MB. USB Initialization ÏÅÐÅÍÎÑ Òåñò îïåðàòèâíîé ïàìÿòè, èíèöèàëèçàöèÿ USB.
32=Display the Award PnP BIOS Extension message. Program onboard SIO ÏÅÐÅÍÎÑ including COM ports, LPT ports, FDD port ÏÅÐÅÍÎÑ and audio devices. ÏÅÐÅÍÎÑ Èíèöèàëèçàöèÿ SuperIO-ìîäóëÿ, âûâîä êîïèðàéòà Award PnP Extention. ÏÅÐÅÍÎÑ Íà ïëàòàõ Gigabyte íà ýòîì ýòàïå âêëþ÷àåòñÿ "ðàçãîí" âèäåîêàðòû.
39=Programming clock synthesizer by I2C bus ÏÅÐÅÍÎÑ Ïðãðàììèðîâàíèå òàéìåðà ïî øèíå I2C
3c=Print setup message at the bottom of the screen ÏÅÐÅÍÎÑ and enable setup (Press DEL to Enter Setup)
3d=Initialize and install PS/2 mouse. Build the INT 15h ÏÅÐÅÍÎÑ function E820H table. Decompress ACPI Table
3e=Try to turn on Level 2 cache
3f=Initialize shadow RAM
40=Display virus protect disable or enable ÏÅÐÅÍÎÑ Âûâîä ñîñòîÿíèÿ çàùèòû MBR æ¸ñòêèõ äèñêîâ îò âèðóñîâ.
41=Initialize floppy disk drive controller and any drives
42=Install IDE Hard Drives. Detect CD ROM, LS120 on IDE Bus. ÏÅÐÅÍÎÑ Set PIO timing. Cut IRQ 12 connection if PS2 mouse is not installed ÏÅÐÅÍÎÑ Ïîèñê óñòðîéñòâ íà IDE-øèíàõ. Îòêëþ÷åíèå PS/2 åñëè òàì íåò ìûøè.
43=If it is a PNP BIOS, initialize serial and parallel ports
45=Detect and Initialize math coprocessor
47=Support HDD Write Protection ÏÅÐÅÍÎÑ Âêëþ÷åíèå çàùèòû MBR, åñëè íóæíî.
4e=If there is any error detected (such as video, keyboard etc.), ÏÅÐÅÍÎÑ show all the error messages on the screen and wait for user key ÏÅÐÅÍÎÑ Âûâîä îøèáîê íà ýêðàí, îæèäàíèå íàæàòèÿ F1 èëè DELete.
4f=If password is needed, ask for password. Clear the Energy Star Logo
50=Write all the CMOS values currently in the BIOS stack area back into the CMOS ÏÅÐÅÍÎÑ Ñîõðàíåíèå äàííûõ â CMOS
51=PnP Boot Device initialization, IDE 32-bit support (ñòàðûå AwardBIOS). Clear memory in protected mode
52=Later PCI initialization. Initialize option ROM's included Award modular table. ÏÅÐÅÍÎÑ Enable/Disable global APM interface initialization
53=Initialize time value in BIOS data area by translate the RTC time value into a timer tick value
55=Begin to Shutdown the system 5 Volt
60=Setup anti-virus Boot sector protection functionality according to setup
61=Try to turn on Level 2 cache. Set the boot up speed. ÏÅÐÅÍÎÑ Chipset and Power Management initialization. Show the system configuration table
62=Setup daylight saving according to Setup value. Program the NUM Lock, ÏÅÐÅÍÎÑ typmatic rate and typmatic speed ÏÅÐÅÍÎÑ according to Setup setting
63=Update the ESCD and DMI data pool. Build MP and PCI/IRQ routing table. ÏÅÐÅÍÎÑ Save ACPI content. PNP final initialization. Beep before boot
75=Thermal Warning ÏÅÐÅÍÎÑ Ïåðåãðåâ, îäíàêî!
80=Primary Master IDE Power Off
81=Primary Slave IDE Power Off
82=Secondary Master IDE Power Off
83=Secondary Slave IDE Power Off
84=Sound Chip Power Off
85=LAN adapter Power Off
86=COMA Power Off
87=COMB Power Off
88=LPT Power Off
89=PCMCIA Power Off
8a=Dock station Power Off
8b=Turn CRT Off
8c=Turn OEM-defined Device #1 Off
8d=Turn OEM-defined Device #2 Off
90=Primary Master IDE Power On
91=Primary Slave IDE Power On
92=Secondary Master IDE Power On
93=Secondary Slave IDE Power On
94=Sound Chip Power On
95=LAN adapter Power On
96=COMA Power On
97=COMB Power On
98=LPT Power On
99=PCMCIA Power On
9a=Dock station Power On
9b=Turn CRT On
9c=Turn OEM-defined Device #1 On
9d=Turn OEM-defined Device #2 On
a0=Initialize APIC#0
a1=Initialize APIC#1
a2=Initialize APIC#2
a3=Initialize APIC#3
b0=Åñëè ïðè ðàáîòå â Protected Mode âîçíèêëè îøèáêè èñêëþ÷åíèÿ ëèáî îøèáêè, ÏÅÐÅÍÎÑ âûçâàííûå íåêîððåêòíûìè äàííûìè â äåñêðèïòîðíûõ ÏÅÐÅÍÎÑ òàáëèöàõ èëè ñòðàíè÷íûìè íàðóøåíèÿìè, â äèàãíîñòè÷åñêèé ïîðò âûâîäèòñÿ êîä B0h, ÏÅÐÅÍÎÑ è óïðàâëåíèå ïåðåäàåòñÿ îáðàáîò÷èêó ïðåðûâàíèé (èñêëþ÷åíèé). Íà ýòó ïðîöåäóðó ÏÅÐÅÍÎÑ íàñòðàèâàþòñÿ äåñêðèïòîðû IDT âíóòðåííèõ ïðåðûâàíèé ÏÅÐÅÍÎÑ ïðîöåññîðà íà âðåìÿ ðàáîòû â çàùèùåííîì ðåæèìå, íàïðèìåð, ÏÅÐÅÍÎÑ ïðè òåñòå ðàñøèðåííîé ïàìÿòè
b1=Unclaimed NMI occurs, Press F1 to disable NMI, F2 to reboot
b2=Çàïðîñ NMI ïîñëå B1h îñòàëñÿ àêòèâíûì. Ïðîöåññ POST îñòàíîâëåí.
bb=Begin to Shutdown the system 0 Volt
be=Program defaults values into chipset according to the ÏÅÐÅÍÎÑ MODBINable Chipset Default Table
bf=Program the chipset according to Setup. If auto-configuration ÏÅÐÅÍÎÑ is enabled, used pre-defined values ÏÅÐÅÍÎÑ in the MODBINable Auto-Table
d0=PMI occurred
d1=Idle (doze) mode
d2=Standby mode
d3=Suspend mode
d4=PMI video off
d7=Software Doze
d8=Software Standby
d9=Software Suspend
e1=Setup Pages E1 - Page 1. ÏÅÐÅÍÎÑ Îðãàíèçàöèÿ ïîñòðàíè÷íîãî îáìåíà ÏÅÐÅÍÎÑ õàðàêòåðíà äëÿ ðàííèõ ðåàëèçàöèé Award BIOS, ÏÅÐÅÍÎÑ ïðåäíàçíà÷åííûõ äëÿ èñïîëüçîâàíèÿ íà i486 ÏÅÐÅÍÎÑ ïëàòôîðìàõ, îñíàùåííûõ ISA/VESA øèíàìè ÏÅÐÅÍÎÑ áåç ïîääåðæêè ôóíêöèé Plug-and-Play
ec=ECC associate with System Management Interrupt
ed=HDD hang up on 0V resume
ef=Error at F000 segment
f0=Failed CPU#0
f1=Failed CPU#1
f2=Failed CPU#2
f3=Failed CPU#3
ff=Âàðèàíò 1: ïîøëà çàãðóçêà ÎÑ ñ íîñèòåëåé, POST çàêîí÷åí. ÏÅÐÅÍÎÑ Âàðèàíò 2: POST âîîáùå íå èä¸ò. Ïðîâåðüòå ÷èïñåò, ÏÅÐÅÍÎÑ CPU, ïèòàíèå, ñèãíàëû RESET è PCI-CLK.
; <Begin of Award 6.0 codes
21=Heuristic Power Management initialization
23=Detecting coprocessor. Veryfing installed FDD (Seek test). ÏÅÐÅÍÎÑ Early chipset PM initialization
24=Updating microcode for Intel CPU. ÏÅÐÅÍÎÑ If ESCD is valid, take into ÏÅÐÅÍÎÑ consideration of the legacy information
25=Scan PCI buses. Program AGP aperture size ÏÅÐÅÍÎÑ according to CMOS setup. Set ÏÅÐÅÍÎÑ SMbus I/O base
27=Initialize the keyboard controller and set up ÏÅÐÅÍÎÑ all of the 40 area data
28=Check Board Signature and BIOS version
29=Program CPU internal MTRR. Program chipset according ÏÅÐÅÍÎÑ to CMOS Setup. Measure CPU speed
2a=Check Board Signature and BIOS version
2b=Invoke video BIOS. Åñëè ïðîáëåìû - ïèùèò êîä "-.." ÏÅÐÅÍÎÑ Â ñëó÷àå ïîëóæèâîãî VideoBIOS'à, ÝÂÌ ìîæåò ÏÅÐÅÍÎÑ çàâèñíóòü íà ýòîì ïîñòêîäå.
2c=Vendor Specific Procedure
2d=Put information on screen display, including Award title, CPU type, CPU speed.
; End of Award 6.0 codes>
00=Äåëà î÷åíü ïëîõè - POST íå èä¸ò âîîáùå. ÏÅÐÅÍÎÑ Óáåäèòåñü, ÷òî ñèãíàë RESET îòïóùåí, ïèòàíèÿ â íîðìå, êâàðö òàêòèðóåò, à ïðîöåññîð ðàáîòîñïîñîáåí. ÏÅÐÅÍÎÑ Âîáùåì, ìàòü-òðóï. Ïîìíèì, ñêîðáèì... :-)
[Beeps]
; òî÷êà=êîðîòêèé ñèãíàë
; òèðå=äëèííûé ñèãíàë
; "@" â êîíöå = êîä ïîâòîðÿåòñÿ áåñêîíå÷íî
.=Óñïåøíûé POST
-@=Ïðîáëåìû ñ ÎÇÓ (ïîâòîðÿþùèåñÿ äëèííûå ïèñêè). ×àñòàÿ ïðè÷èíà ñåãî ãëþêà - íåêîíòàêò â ðàçú¸ìå ÎÇÓ. ÏÅÐÅÍÎÑ Ëèáî ÷òî-òî ñ áëîêîì ïèòàíèÿ (áåñêîíå÷íûé ïèñê)
-..=Îøèáêà âèäåîêàðòû (íå çàïóñêàåòñÿ VideoBIOS), ÏÅÐÅÍÎÑ ëèáî îíà îòñóòñòâóåò.
.--=Ïðîáëåìû ñ âèäåîêàðòîé.
..=Îáíàðóæåíû íåçíà÷èòåëüíûå îøèáêè. ÏÅÐÅÍÎÑ Íà ýêðàíå ìîíèòîðà ïîÿâëÿåòñÿ ïðåäëîæåíèå ÏÅÐÅÍÎÑ âîéòè â ïðîãðàììó CMOS Setup Utility è èñïðàâèòü ñèòóàöèþ. ÏÅÐÅÍÎÑ Ïðîâåðüòå íàäåæíîñòü è ïðàâèëüíîñòü ïîäêëþ÷åíèÿ IDE øëåéôîâ â ðàçúåìàõ.
---=Îøèáêà êîíòðîëëåðà êëàâèàòóðû
.-=Îøèáêà îïåðàòèâíîé ïàìÿòè (RAM)
-...=Îøèáêà ïðè èíèöèàëèçàöèè êëàâèàòóðû èëè îøèáêà âèäåîêàðòû
-.........=1 äëèííûé, 9 êîðîòêèõ ýòî - îøèáêà ïðè ÷òåíèè èç ÏÇÓ
.@=Ïðîáëåìû ñ áëîêîì ïèòàíèÿ