Tasmota-embedded MQTT broker

[bam80]

Hi,
the question is about situations when you can't have a separate MQTT broker device.

Is there any way to embed it to Tasmota itself then?
If no, any better solutions/protocols maybe?

PS:
Use case:
provide fallback mean for Web-application to connect to Tasmota directly if remote MQTT broker is not accessible (and local one can't be set up for some reasons).

[Jason2866]

No embbeded broker. esp32 has not enough resources for this.
mqtt is lightweight and the most used protocol for IoT devices
The "m" in Tasmota stands for mqtt. It is designed for using mqtt.
So no there is no better protocol for Tasmota than mqtt.

[sfromis]

One of the major drawbacks of using http is not getting updates or (in default setup) command responses. Can usually work for "fire and forget" commands.

[bam80]

While I see there is no "good enough" solution, at least it's something.
Thanks to all.

[bam80]

No embbeded broker. esp32 has not enough resources for this.

It seems as week argument as competing firmware does support this:
https://github.com/Mit4el/IoTManager/tree/ver4dev/src%2Fmodules%2Fexec%2FBrokerMQTT

[s-hadinger]

Anyways Tasmota does not support acting as an mqtt broker. If you want a good reason : nobody invested time to make it happen.

[HofeBY2]

@bam80
It is possible to send command´s between Tasmota devices without an mqtty brooker.
search for KNX over TCP

[barbudor]

I don't know if there is a variant of KNX over TCP but for sure Tasmota implementation use UDP Multicast, not TCP

[sfromis]

Sending commands between Tasmota devices can work via http (using WebQuery/WebSend), or via device groups. Still, MQTT is the preferred strategy.

[bam80]

I added my use case to the description, if it's helpful.

Thanks to all for your responses and happy upcoming holidays!

[bam80]

The idea is in case of internet outage or any other reason of MQTT broker inaccessibility, you still able to use your Web app in your house via local Wi-Fi by "redirecting" it to Tasmota device directly.

[sfromis]

No web app, but as already mentioned, you can use a browser for one device at a time. Thus, you can bookmark each on a phone etc home screen (like in a folder) to have relatively quick access.

[bam80]

Tasmota's Web interface is rudimentary and in-acceptable for our needs. I'm designing custom Web app (with MQTT backend) for my project.

[joba-1]

I still don’t quite understand the usecase. You can host a web app, but not an mqtt broker?
The broker is out there on the internet and not with your tasmota devices?
How would a switch to a local backup mqtt broker work?
Doing this coordinated for all clients so they can still all communicate with each other is a complicated task and usually requires some cluster management software which would be hosted where?

[bam80]

You can host a web app, but not an mqtt broker?

It's PWA Web app. Once loaded, it doesn't need hosting any more.

The broker is out there on the internet and not with your tasmota devices?

For example.

How would a switch to a local backup mqtt broker work?

Supposedly, the App would support that.

All of that is not hard requirement for my project, as we can always use the alternative firmware supporting this.
Just wondering..