Shelly Plus RGBW PM

[mewt666]

I incorrectly assumed that the Shelly Plus RGBW PM was supported by Tasmota but I can't find any mention of the device anywhere. Is this supported in some way?

[arendst]

Supported. See minimal docs in source code file xsns_02_analog.ino

 * For shelly RGBW PM:
 * Template {"NAME":"Shelly Plus RGBW PM Pot.meter","GPIO":[1,0,0,0,419,0,0,0,0,0,544,0,0,0,0,1,0,0,1,0,0,416,417,418,0,0,0,0,0,4736,11264,11296,4704,0,4705,0],"FLAG":0,"BASE":1}
 * AdcGpio33 32000,40000,3350        <- Temperature parameters
 * AdcGpio34 1161,3472,10,30         <- Voltage parameters
 * AdcGpio35 960,1017,0.01,0.706     <- Current parameters
 * AdcGpio36 1552,176,3,1            <- I1 Potentiometer RGBW or RGB if SO37 128
 * AdcGpio36 1552,176,3,3            <- I1 Potentiometer RGBW or RGB if SO37 128 without fading
 * AdcGpio38 1552,176,3,1            <- I3 Potentiometer W if SO37 128
 * Fade 1
 * Speed 6
 * VoltRes 2
 * WattRes 2
 * 
 * Template {"NAME":"Shelly Plus RGBW PM Button","GPIO":[1,0,0,0,419,0,0,0,0,0,544,0,0,0,0,1,0,0,1,0,0,416,417,418,0,0,0,0,0,4736,11264,11296,4800,4801,4802,4803],"FLAG":0,"BASE":1}
 * AdcGpio33 32000,40000,3350        <- Temperature parameters
 * AdcGpio34 1161,3472,10,30         <- Voltage parameters
 * AdcGpio35 960,1017,0.01,0.706     <- Current parameters
 * AdcGpio36 511                     <- I1 ADC Button
 * AdcGpio37 511                     <- I2 ADC Button
 * AdcGpio38 511                     <- I3 ADC Button
 * AdcGpio39 511                     <- I4 ADC Button
 * Fade 1
 * Speed 6
 * VoltRes 2
 * WattRes 2
 * ```

[mewt666]

Thank you greatly for your quick response. I will try to flash and hope for the best!