Error in Web Interface in new version Tasmota 14.3.0.7 with WS2812

[Romik4x4]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.

The latest version has problems with the control output for WS2812.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): _____
• Tasmota binary firmware version number used: _____
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ver 14.3.0.7

ver 14.0.0.4

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[Jason2866]

The user interface in WebUI has changed. You did not tell what you are missing.

[Romik4x4]

No Button with my relay via MCP230xx R1 R2 R3 R4 and no on/off display via TM1637 button.