Sensors do not report some information on ZBINFO command

[rp2019433]

PROBLEM DESCRIPTION

When issuing zbinfo for some kind of sensors, specific attributes are not shown.

FOR AQARA MOTION SENSOR:

TELEMETRY - Occupancy is on the output

09:36:59.029 RSL: SENSOR = {"ZbInfo":{" Sensor de Movimento":{"Device":"0x1F83","Name":" Sensor de Movimento","IEEEAddr":"0x00258F010AB77CB5","ModelId":"lumi.sensor_motion.aq2","Manufacturer":"LUMI","Endpoints":[1],"Config":["I01"],"Illuminance":11,"Occupancy":0,"Reachable":true,"BatteryPercentage":100,"BatteryLastSeenEpoch":1723551657,"LastSeen":925,"LastSeenEpoch":1723551694,"LinkQuality":87}}}

ZBINFO - Occupancy is on the output

09:36:59.022 CMD: zbinfo 0x1F83
09:36:59.029 RSL: SENSOR = {"ZbInfo":{" Sensor de Movimento":{"Device":"0x1F83","Name":" Sensor de Movimento","IEEEAddr":"0x00258F010AB77CB5","ModelId":"lumi.sensor_motion.aq2","Manufacturer":"LUMI","Endpoints":[1],"Config":["I01"],"Illuminance":11,"Occupancy":0,"Reachable":true,"BatteryPercentage":100,"BatteryLastSeenEpoch":1723551657,"LastSeen":925,"LastSeenEpoch":1723551694,"LinkQuality":87}}}
09:36:59.035 RSL: RESULT = {"ZbInfo":"Done"}

FOR AQARA DOOR SENSOR:

TELEMETRY - Contact is on the output

09:30:31.304 RSL: SENSOR = {"ZbReceived":{"Sensor de Chuva":{"Device":"0xF288","Name":"Sensor de Chuva","Contact":0,"Endpoint":1,"LinkQuality":214}}}
09:30:31.404 RSL: SENSOR = {"ZbReceived":{"Sensor de Chuva":{"Device":"0xF288","Name":"Sensor de Chuva","Contact":1,"Endpoint":1,"LinkQuality":222}}}

ZBINFO - Contact is NOT on the output

09:31:17.918 CMD: zbinfo 0xF288
09:31:17.924 RSL: SENSOR = {"ZbInfo":{"Sensor de Chuva":{"Device":"0xF288","Name":"Sensor de Chuva","IEEEAddr":"0x00158D040AF87B24","ModelId":"lumi.sensor_magnet.aq2","Manufacturer":"LUMI","Endpoints":[1],"Config":["A01"],"ZoneStatus":12289,"Reachable":true,"BatteryPercentage":100,"BatteryLastSeenEpoch":1723550213,"LastSeen":45,"LastSeenEpoch":1723552232,"LinkQuality":218}}}
09:31:17.931 RSL: RESULT = {"ZbInfo":"Done"}

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used: Aqara Door Sensor (MCCGQ11LM)
• Tasmota binary firmware version number used: 14.1.0.4 (5bac2a2-zbbrdgpro)
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

11:07:23.499 CMD: STATUS 0 
11:07:23.503 RSL: STATUS = {"Status":{"Module":0,"DeviceName":"Sonoff Zigbee Pro","FriendlyName":["Sonoff Zigbee Pro"],"Topic":"tasmota_EAEE50","ButtonTopic":"0","Power":"1","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
11:07:23.509 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"https://ota.tasmota.com/tasmota32/tasmota32-zbbrdgpro.bin","RestartReason":"Software reset CPU","Uptime":"0T14:19:27","StartupUTC":"2024-08-12T23:47:56","Sleep":50,"CfgHolder":4617,"BootCount":13,"BCResetTime":"2023-12-09T13:37:40","SaveCount":36}}
11:07:23.514 RSL: STATUS2 = {"StatusFWR":{"Version":"14.1.0.4(5bac2a2-zbbrdgpro)","BuildDateTime":"2024-08-11T17:33:02","Core":"3_0_4","SDK":"5.1.4.240801","CpuFrequency":160,"Hardware":"ESP32-D0WD-V3 v3.1","CR":"421/699"}}
11:07:23.518 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["netlr",""],"TelePeriod":10,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006082","00004000","00000000"]}}
11:07:23.529 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":1574,"Free":281,"Heap":155,"StackLowMark":4,"PsrMax":0,"PsrFree":0,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"1640C8","FlashFrequency":40,"FlashMode":"DIO","Features":["0809","8F8A87CF","00548001","000000CF","010013C0","C0000981","40024080","00200000","5400082C","00000080","00000004"],"Drivers":"1,2,!3,!4,!5,!8,9,10,12,!16,!20,!21,23,24,!27,29,!35,38,!41,50,52,!59,62,!68,82,121","Sensors":"1,2,3,5,6,127","I2CDriver":"7"}}
11:07:23.547 RSL: STATUS7 = {"StatusTIM":{"UTC":"2024-08-13T14:07:23Z","Local":"2024-08-13T11:07:23","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-27T03:00:00","Timezone":"-03:00","Sunrise":"01:41","Sunset":"16:08"}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

As problem description.

EXPECTED BEHAVIOUR

It was expected when typing ZBINFO all the sensors information to be gathered.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[rp2019433]

Just to remark the importance of ZBINFO brings all the attributes from a sensor: when someone is using Tasmota Zigbee without any external home automation software, it's possible to gather sensors informations directly from Zigbee Bridge using Tasmota API, like this: http://192.168.20.55/cm?cmnd=zbinfo

In this case, it's importante all the sensors states are available with ZBINFO, or other way, so the user can have access directly to these values without any other intermediate system.

[sfromis]

Don't open an "issue" for an enhancement suggestion, especially not when there already is a thread about the topic.
#20861