Replies: 12 comments 3 replies
-
hey i just bought the d4 i cant find any software to make this work. |
Beta Was this translation helpful? Give feedback.
-
Should probably work if set for Wiegand output ? |
Beta Was this translation helpful? Give feedback.
-
I have usb
…On Sun, Nov 3, 2024, 8:38 a.m. smcgann99 ***@***.***> wrote:
Should probably work if set for Wiegand output ?
—
Reply to this email directly, view it on GitHub
<#20328 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BMT7URO27ROOC3IJW33LJCTZ6YRNRAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJTGQ2DEMY>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
i taught usb was best. so should i get widgand output not hard to do, i can
also go uart.
…On Sun, Nov 3, 2024 at 12:48 PM smcgann99 ***@***.***> wrote:
I'm afraid that Tasmota is not really going to help you then
—
Reply to this email directly, view it on GitHub
<#20328 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BMT7URKAD2KCVWI23LGIEJ3Z6ZOYRAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJTGU3DSNQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
im just trying to read and write. i was told my gwiot d4 was plug and play,
but that not the case.
…On Mon, Nov 4, 2024 at 8:56 AM smcgann99 ***@***.***> wrote:
That will not help connecting reader to Tasmota. What is your application
(what are you trying to do) ?
Tasmota supports D0 /D1 connection to GPIO if you build it with the
Wiegand option. It can then display the serial number of the card, that is
all. If you want more features you are better off looking at something like
- https://github.com/esprfid/esp-rfid
—
Reply to this email directly, view it on GitHub
<#20328 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BMT7URJK3MGZSZ3CR74YNKDZ654IHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJUGI4TMNI>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I only know the 7941e. Can you please Share the link to the gwiot d4?
Fabian
________________________________
Von: kobepower ***@***.***>
Gesendet: Tuesday, November 5, 2024 6:53:23 AM
An: arendst/Tasmota ***@***.***>
Cc: FraatGIT ***@***.***>; Author ***@***.***>
Betreff: Re: [arendst/Tasmota] support for gwiot 7941e RFID reader (Discussion #20328)
im just trying to read and write. i was told my gwiot d4 was plug and play,
but that not the case.
On Mon, Nov 4, 2024 at 8:56 AM smcgann99 ***@***.***> wrote:
That will not help connecting reader to Tasmota. What is your application
(what are you trying to do) ?
Tasmota supports D0 /D1 connection to GPIO if you build it with the
Wiegand option. It can then display the serial number of the card, that is
all. If you want more features you are better off looking at something like
- https://github.com/esprfid/esp-rfid
—
Reply to this email directly, view it on GitHub
<#20328 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BMT7URJK3MGZSZ3CR74YNKDZ654IHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJUGI4TMNI>
.
You are receiving this because you commented.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub<#20328 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AFAICYS5SJ42KKBM3YLIOFDZ7BMNHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGA2DAMI>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
https://www.aliexpress.com/item/1005006947872163.html?spm=a2g0o.order_list.order_list_main.234.5a731802SVd2bC
the seller has software but he wont reply back. he asked if i wanted w26
uart or usb, i said usb since i didn know now the use the other but after
reading i figured it out when i open notepad i get hex numbers. the reader
works but its coded .
…On Tue, Nov 5, 2024 at 2:05 AM FraatGIT ***@***.***> wrote:
I only know the 7941e. Can you please Share the link to the gwiot d4?
Fabian
________________________________
Von: kobepower ***@***.***>
Gesendet: Tuesday, November 5, 2024 6:53:23 AM
An: arendst/Tasmota ***@***.***>
Cc: FraatGIT ***@***.***>; Author ***@***.***>
Betreff: Re: [arendst/Tasmota] support for gwiot 7941e RFID reader
(Discussion #20328)
im just trying to read and write. i was told my gwiot d4 was plug and
play,
but that not the case.
On Mon, Nov 4, 2024 at 8:56 AM smcgann99 ***@***.***> wrote:
> That will not help connecting reader to Tasmota. What is your
application
> (what are you trying to do) ?
> Tasmota supports D0 /D1 connection to GPIO if you build it with the
> Wiegand option. It can then display the serial number of the card, that
is
> all. If you want more features you are better off looking at something
like
> - https://github.com/esprfid/esp-rfid
>
> —
> Reply to this email directly, view it on GitHub
> <
#20328 (reply in thread)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/BMT7URJK3MGZSZ3CR74YNKDZ654IHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJUGI4TMNI>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub<
#20328 (comment)>,
or unsubscribe<
https://github.com/notifications/unsubscribe-auth/AFAICYS5SJ42KKBM3YLIOFDZ7BMNHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGA2DAMI>.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub
<#20328 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BMT7URKYBIJEGTEEMEOUOGLZ7BU4XAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGA4TENI>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
i can change it to wigand
https://www.aliexpress.com/item/1005004945570425.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.3.5728FIF7FIF7JL&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40196.366991.0&scm_id=1007.40196.366991.0&scm-url=1007.40196.366991.0&pvid=4c64e3a5-cd60-4843-ad01-a8eb34a47df1&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40196.366991.0,pvid:4c64e3a5-cd60-4843-ad01-a8eb34a47df1,tpp_buckets:668%232846%238113%231998&pdp_npi=4%40dis%21CAD%215.30%214.83%21%21%213.73%213.40%21%402103241117307908975005603ed49e%2112000031109073485%21rec%21CA%216050513662%21X&utparam-url=scene%3ApcDetailTopMoreOtherSeller%7Cquery_from%3A
would any of these help me or would i get the same outcome.
…On Tue, Nov 5, 2024 at 2:17 AM Kobe ***@***.***> wrote:
https://www.aliexpress.com/item/1005006947872163.html?spm=a2g0o.order_list.order_list_main.234.5a731802SVd2bC
the seller has software but he wont reply back. he asked if i wanted w26
uart or usb, i said usb since i didn know now the use the other but after
reading i figured it out when i open notepad i get hex numbers. the reader
works but its coded .
On Tue, Nov 5, 2024 at 2:05 AM FraatGIT ***@***.***> wrote:
> I only know the 7941e. Can you please Share the link to the gwiot d4?
>
> Fabian
> ________________________________
> Von: kobepower ***@***.***>
> Gesendet: Tuesday, November 5, 2024 6:53:23 AM
> An: arendst/Tasmota ***@***.***>
> Cc: FraatGIT ***@***.***>; Author ***@***.***>
> Betreff: Re: [arendst/Tasmota] support for gwiot 7941e RFID reader
> (Discussion #20328)
>
>
> im just trying to read and write. i was told my gwiot d4 was plug and
> play,
> but that not the case.
>
> On Mon, Nov 4, 2024 at 8:56 AM smcgann99 ***@***.***> wrote:
>
> > That will not help connecting reader to Tasmota. What is your
> application
> > (what are you trying to do) ?
> > Tasmota supports D0 /D1 connection to GPIO if you build it with the
> > Wiegand option. It can then display the serial number of the card, that
> is
> > all. If you want more features you are better off looking at something
> like
> > - https://github.com/esprfid/esp-rfid
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
> #20328 (reply in thread)>,
>
> > or unsubscribe
> > <
> https://github.com/notifications/unsubscribe-auth/BMT7URJK3MGZSZ3CR74YNKDZ654IHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJUGI4TMNI>
>
> > .
> > You are receiving this because you commented.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub<
> #20328 (comment)>,
> or unsubscribe<
> https://github.com/notifications/unsubscribe-auth/AFAICYS5SJ42KKBM3YLIOFDZ7BMNHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGA2DAMI>.
>
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
> —
> Reply to this email directly, view it on GitHub
> <#20328 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/BMT7URKYBIJEGTEEMEOUOGLZ7BU4XAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGA4TENI>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
Okay. So the reason why I'm doing this is that since Bitcoin is getting
big, there's no real way to process it so I want to see if I can make a
credit card that can store Bitcoin and use it as a payment method so you
could have Bitcoin on it and then there'll be. A Bitcoin reader, and then
you just tap it like how you're tapping a regular bank card. Because if
bitcoin's going the way it's going, we're going to need some sort of way of
transferring and using bitcoin
…On Tue, Nov 5, 2024, 2:19 a.m. Kobe ***@***.***> wrote:
i can change it to wigand
https://www.aliexpress.com/item/1005004945570425.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.3.5728FIF7FIF7JL&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40196.366991.0&scm_id=1007.40196.366991.0&scm-url=1007.40196.366991.0&pvid=4c64e3a5-cd60-4843-ad01-a8eb34a47df1&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40196.366991.0,pvid:4c64e3a5-cd60-4843-ad01-a8eb34a47df1,tpp_buckets:668%232846%238113%231998&pdp_npi=4%40dis%21CAD%215.30%214.83%21%21%213.73%213.40%21%402103241117307908975005603ed49e%2112000031109073485%21rec%21CA%216050513662%21X&utparam-url=scene%3ApcDetailTopMoreOtherSeller%7Cquery_from%3A
would any of these help me or would i get the same outcome.
On Tue, Nov 5, 2024 at 2:17 AM Kobe ***@***.***> wrote:
>
> https://www.aliexpress.com/item/1005006947872163.html?spm=a2g0o.order_list.order_list_main.234.5a731802SVd2bC
> the seller has software but he wont reply back. he asked if i wanted w26
> uart or usb, i said usb since i didn know now the use the other but after
> reading i figured it out when i open notepad i get hex numbers. the reader
> works but its coded .
>
> On Tue, Nov 5, 2024 at 2:05 AM FraatGIT ***@***.***> wrote:
>
>> I only know the 7941e. Can you please Share the link to the gwiot d4?
>>
>> Fabian
>> ________________________________
>> Von: kobepower ***@***.***>
>> Gesendet: Tuesday, November 5, 2024 6:53:23 AM
>> An: arendst/Tasmota ***@***.***>
>> Cc: FraatGIT ***@***.***>; Author ***@***.***>
>> Betreff: Re: [arendst/Tasmota] support for gwiot 7941e RFID reader
>> (Discussion #20328)
>>
>>
>> im just trying to read and write. i was told my gwiot d4 was plug and
>> play,
>> but that not the case.
>>
>> On Mon, Nov 4, 2024 at 8:56 AM smcgann99 ***@***.***> wrote:
>>
>> > That will not help connecting reader to Tasmota. What is your
>> application
>> > (what are you trying to do) ?
>> > Tasmota supports D0 /D1 connection to GPIO if you build it with the
>> > Wiegand option. It can then display the serial number of the card,
>> that is
>> > all. If you want more features you are better off looking at something
>> like
>> > - https://github.com/esprfid/esp-rfid
>> >
>> > —
>> > Reply to this email directly, view it on GitHub
>> > <
>> #20328 (reply in thread)>,
>>
>> > or unsubscribe
>> > <
>> https://github.com/notifications/unsubscribe-auth/BMT7URJK3MGZSZ3CR74YNKDZ654IHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJUGI4TMNI>
>>
>> > .
>> > You are receiving this because you commented.Message ID:
>> > ***@***.***>
>> >
>>
>> —
>> Reply to this email directly, view it on GitHub<
>> #20328 (comment)>,
>> or unsubscribe<
>> https://github.com/notifications/unsubscribe-auth/AFAICYS5SJ42KKBM3YLIOFDZ7BMNHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGA2DAMI>.
>>
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <#20328 (comment)>,
>> or unsubscribe
>> <https://github.com/notifications/unsubscribe-auth/BMT7URKYBIJEGTEEMEOUOGLZ7BU4XAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGA4TENI>
>> .
>> You are receiving this because you commented.Message ID:
>> ***@***.***>
>>
>
|
Beta Was this translation helpful? Give feedback.
-
Thank you .
…On Tue, Nov 5, 2024, 8:05 a.m. smcgann99 ***@***.***> wrote:
OK so that's well and truly out of scope for Tasmota then. You would need
to look elsewhere I'm afraid.
Tip you need to do some research on reading and writing to smart cards
encryption etc etc ... good luck with your project.
—
Reply to this email directly, view it on GitHub
<#20328 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BMT7URL5H4CIJHENG5RMN73Z7C7AHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGQ3DKOA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
[image: 20241106_000222.jpg]
can you tell what connection this is, im confused is uart wg26, i think i
found the problem the usb wire he sent me the pc dont reconize. i think im
gonna try new wire what connection is this thank you
…On Tue, Nov 5, 2024 at 9:13 AM Kobe ***@***.***> wrote:
Thank you .
On Tue, Nov 5, 2024, 8:05 a.m. smcgann99 ***@***.***> wrote:
> OK so that's well and truly out of scope for Tasmota then. You would need
> to look elsewhere I'm afraid.
> Tip you need to do some research on reading and writing to smart cards
> encryption etc etc ... good luck with your project.
>
> —
> Reply to this email directly, view it on GitHub
> <#20328 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/BMT7URL5H4CIJHENG5RMN73Z7C7AHAVCNFSM6AAAAABRCX4ZEGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJVGQ3DKOA>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
PROBLEM DESCRIPTION
I would like to integrate the gwiot 7941e module and continue to use scanned RFID codes.
I used the search function. However, nothing found that helps me.
There is a very small and nice a cheep rfid reader available with intergrated antena avaiable on the marked.
https://github.com/gutierrezps/gwiot7941e?tab=readme-ov-file
https://www.arduino.cc/reference/en/libraries/gwiot-7941e/
It would be nice if Tasmota was able to support this device and read the RFID.
REQUESTED INFORMATION
ADDITIONAL CONTEXT
The RFID reader is avaiable here:
https://de.aliexpress.com/item/1005004482038419.html?spm=a2g0o.detail.0.0.53911ee9WsKzUi&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.362094.0&scm_id=1007.40050.362094.0&scm-url=1007.40050.362094.0&pvid=77ac48f9-3ae5-4d5a-bbf0-b3bedd77297f&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.362094.0,pvid:77ac48f9-3ae5-4d5a-bbf0-b3bedd77297f,tpp_buckets:668%232846%238116%232002&pdp_npi=4%40dis%21EUR%212.52%212.22%21%21%212.74%21%21%40211b813f17037406223618929e73f7%2112000036725730112%21rec%21DE%211637493361%21
(Please, remember to close the issue when the problem has been addressed)
Beta Was this translation helpful? Give feedback.
All reactions