R503 fingerprint sensor bulit-in led not work

[mefisto22]

PROBLEM DESCRIPTION

When i use my fingerprint sensor ( https://www.aliexpress.com/item/33053655412.html?spm=a2g0o.order_list.0.0.75e71802eqBbqx ) the built-in led not work. When i use with another build ( https://github.com/vinz486/fingerprint-r503-mqtt ) it`s work.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• [ x] Read the Contributing Guide and Policy and the Code of Conduct
• [x ] Searched the problem in issues
• [x ] Searched the problem in discussions
• [x ] Searched the problem in the docs
• [x ] Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Wemos D1 mini
• Tasmota binary firmware version number used: allsensors.bin
  • [ x] Pre-compiled
  • Self-compiled
• Flashing tools used: web installer
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

22:49:13.798 RSL: RESULT = {"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}
22:49:14.847 RSL: RESULT = {"Module":{"18":"Generic"}}
22:49:15.895 RSL: RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"0":"None"},"GPIO2":{"0":"None"},"GPIO3":{"0":"None"},"GPIO4":{"0":"None"},"GPIO5":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"5504":"AS608 Tx"},"GPIO13":{"0":"None"},"GPIO14":{"5536":"AS608 Rx"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"}}

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:
22:49:49.845 RSL: RESULT = {"Rule1":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
22:49:50.888 RSL: RESULT = {"Rule2":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
22:49:51.932 RSL: RESULT = {"Rule3":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}

• Provide the output of this command: Status 0:

  STATUS 0 output here:
22:50:15.237 RSL: STATUS = {"Status":{"Module":18,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_992779","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
22:50:15.243 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":" ","RestartReason":"Software/System restart","Uptime":"0T00:18:44","StartupUTC":"2022-05-07T21:31:31","Sleep":50,"CfgHolder":4617,"BootCount":7,"BCResetTime":"2022-05-07T22:24:55","SaveCount":15,"SaveAddress":"F5000"}}
22:50:15.247 RSL: STATUS2 = {"StatusFWR":{"Version":"11.1.0.2(allsensors)","BuildDateTime":"2022-05-07T13:45:57","Boot":31,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"324/699"}}
22:50:15.251 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["T******",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A190000000000","00000080","00006000","00004000"]}}
22:50:15.268 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":720,"Free":280,"Heap":17,"ProgramFlashSize":1024,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":3,"Features":["00000809","8F908787","04146001","FFFFB7CF","8F7417FF","303E0AD3","1149785A","26204FFF","0408F0F3"],"Drivers":"1,2,3,4,7,8,9,10,12,14,15,20,21,24,28,29,34,43,47,50,60,62","Sensors":"1,2,3,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,24,26,27,28,29,30,31,32,38,40,41,42,44,45,46,50,51,54,55,56,57,58,59,63,64,65,66,67,70,71,72,73,74,76,78,79,81,82,85,86,88,89,90,91,92,93"}}
22:50:15.276 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota-992779-1913","IPAddress":"*******","Gateway":"*******","Subnetmask":"255.255.255.0","DNSServer1":"192.****2","DNSServer2":"192.168.22.1","Mac":"E8:DB:84:99:27:79","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
22:50:15.281 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_992779","MqttUser":"DVES_USER","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
22:50:15.286 RSL: STATUS7 = {"StatusTIM":{"UTC":"2022-05-07T21:50:15","Local":"2022-05-07T22:50:15","StartDST":"2022-03-27T02:00:00","EndDST":"2022-10-30T03:00:00","Timezone":"+01:00","Sunrise":"05:19","Sunset":"20:13"}}
22:50:15.292 RSL: STATUS10 = {"StatusSNS":{"Time":"2022-05-07T22:50:15"}}
22:50:15.297 RSL: STATUS11 = {"StatusSTS":{"Time":"2022-05-07T22:50:15","Uptime":"0T00:18:44","UptimeSec":1124,"Heap":17,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":2119,"MqttCount":0,"Wifi":{"AP":1,"SSId":"*****","BSSId":"E6:******3","Channel":6,"Mode":"11n","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:04"}}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:
22:54:58.737 RSL: STATE = {"Time":"2022-05-07T22:54:58","Uptime":"0T00:00:10","UptimeSec":10,"Heap":19,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":107,"MqttCount":0,"Wifi":{"AP":1,"SSId":"TorokHome_IoT","BSSId":"E6:63:DA:71:95:C3","Channel":6,"Mode":"11n","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:04"}}
22:54:59.349 CFG: Saved to flash at FB, Count 17, Bytes 4096
22:55:02.110 RSL: RESULT = {"FPrint":{"Id":12,"Confidence":72}}
22:55:03.018 RSL: RESULT = {"FPrint":{"Id":12,"Confidence":74}}
22:55:03.843 RSL: RESULT = {"FPrint":{"Id":12,"Confidence":78}}
22:55:03.853 RSL: config = {"ip":"192.168.22.96","dn":"Tasmota","fn":["Tasmota",null,null,null,null,null,null,null],"hn":"tasmota-992779-1913","mac":"E8DB84992779","md":"Generic","ty":0,"if":0,"ofln":"Offline","onln":"Online","state":["OFF","ON","TOGGLE","HOLD"],"sw":"11.1.0.2","t":"tasmota_992779","ft":"%prefix%/%topic%/","tp":["cmnd","stat","tele"],"rl":[0,0,0,0,0,0,0,0],"swc":[-1,-1,-1,-1,-1,-1,-1,-1],"swn":[null,null,null,null,null,null,null,null],"btn":[0,0,0,0,0,0,0,0],"so":{"4":0,"11":0,"13":0,"17":0,"20":0,"30":0,"68":0,"73":0,"82":0,"114":0,"117":0},"lk":0,"lt_st":0,"sho":[0,0,0,0],"ver":1}
22:55:03.857 RSL: sensors = {"sn":{"Time":"2022-05-07T22:55:03"},"ver":1}

TO REPRODUCE

Steps to reproduce the behavior:
just using fingerprint sensor

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.
when i touch the sensor the bult-in led start`s to light

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[MDeeApp]

Would love to see colors addded. Adafruit_Fingerprint library has the functionality implemented.
A short test with a custom firmware and modified xsns_79_as608.ino file proved it could implemented.

[Noschvie]

Which hardware are you using for yours tests, ESP32 ?

[MDeeApp]

I'm using ESP32 and a GROW R503

[Jason2866]

Would love to see colors addded. Adafruit_Fingerprint library has the functionality implemented.
A short test with a custom firmware and modified xsns_79_as608.ino file proved it could implemented.

PRs are welcome :-)

[arendst]

Try latest dev adding some minor color bling bling

[kroon040]

Hi. tested and works. Startup the led is red. Placing the finger it's pink. Can this color be changed to blue or green?

[Noschvie]

Have a look to these defines:

Tasmota/tasmota/tasmota_xsns_sensor/xsns_79_as608.ino

Line 42 in 7f5e794

#define AS608_COLOR_INIT 1 // Red = 1, Blue = 2, Purple = 3, Green = 4, Yellow = 5, Cyan = 6, White = 7

Tasmota/tasmota/tasmota_xsns_sensor/xsns_79_as608.ino

Line 45 in 7f5e794

#define AS608_COLOR_SCAN 3 // Red = 1, Blue = 2, Purple = 3, Green = 4, Yellow = 5, Cyan = 6, White = 7