Thermostat driver

[MrNomNom]

Hi all, started using Sonoff 4ch relay with 3 heating zones. So far I am really happy how stable heating is (I am using basically default settings).

Thanks devs ;)

Ps. my temp sensors are Aqara Temperature and Humidity sensors.

Adding screenshot of one heating zone, really cool stuff :)

Here is how wiring looks like (not the prettiest one :)

[rapi3]

Tasmota project and community it is really amazing !

I just discovered Tasmota project this year and I made: Alarm system, sensors and now a thermostat with Tasmota firmware.
It is really important for me because I can control stuff in the house when I am not at home for a long period which is 1/2 of the year.

I just switched from rpi I used to control the temp in the house for last 5 years with one RF 433 relay and I made my own thermostat with a Sonoff 1ch modified and firmware only with DS18B20 sensor.
All I miss at the moment from the old solution it is the possibility to quick adjust the desired temp from a web interface but I think I can solve this in the future, I just need to send by mqtt new value for mem1-8 variable I use.

It monitor the rooms temp from 8 external sensors I made with wemos D1 mini + DS18B20 and it control the main heating.
The heating It is also stable because the intervals I set are independent for each room - and depend also of sensors location in the room from heating radiators.
At this moment I use +0.2C and +0.5C range to start-stop the heating depend of room.