Sonoff ZB Bridge inresponsive

[valki2]

Hi!
A new sonoff zigbee bridge was successfully flashed using tasmotizer and following this documenation: https://zigbee.blakadder.com/Sonoff_ZBBridge.html

Program Version | 9.2.0.4(zbbridge)
build 2021-01-27T16:44:46
core 2_7_4_9/2.2.2-dev(38a443e)
(also tried 9.2.0. stable release)

tried both versions of the ota file for the zigbee module.

Problem: The device gets very, very slow.... its not really responding. Each page in the webinterface needs minutes to build up.
There is no bootloop during startup, wifi and pings are good.

But things go wrong and the device is resetting.

---

00:00:00.032 CFG: Loaded from flash at FC, Count 54
00:00:00.035 QPC: Count 1
00:00:00.038 ZIG: ZBBridge EEPROM found at address 0x50
00:00:00.039 SNS: Hardware Serial
00:00:00.041 Project tasmota Tasmota Version 9.2.0.4(zbbridge)-2_7_4_9(2021-01-27T16:44:46)
00:00:00.041 ZIG: Resetting EZSP device
00:00:00.527 WIF: Connecting to AP1 Mafia_IoT Channel 7 BSSId 4A:8F:5A:C5:17:AC in mode 11n as tasmota_E2B35B-4955...
00:00:01.755 WIF: Connected
00:00:02.005 HTP: Web server active on tasmota_E2B35B-4955 with IP address 192.168.3.241
00:00:23.548 ZIG: Resetting EZSP device

Any ideas what I could do to pinpoint the problem?

[valki2]

@ moderator.... please delete this topic - i opened an issue.