GolangCI-Lint

GolangCI-Lint is a linters aggregator. It's fast: on average 5 times faster than gometalinter. It's easy to integrate and use, has nice output and has a minimum number of false positives. It supports go modules.

GolangCI-Lint has integrations with VS Code, GNU Emacs, Sublime Text.

Follow the news and releases on our twitter and our blog.

Sponsored by GolangCI.com: SaaS service for running linters on GitHub pull requests. Free for Open Source.

GolangCI-Lint

Demo

Short 1.5 min video demo of analyzing beego.

Install

Binary

Most installations are done for CI (e.g. Travis CI, CircleCI). It's important to have reproducible CI: don't start to fail all builds at the same time. With golangci-lint this can happen if you use deprecated option --enable-all and a new linter is added or even without --enable-all: when one upstream linter is upgraded.

It's highly recommended to install a specific version of golangci-lint available on the releases page.

Here is the recommended way to install golangci-lint v1.26.0:

# binary will be $(go env GOPATH)/bin/golangci-lint
curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(go env GOPATH)/bin v1.26.0

# or install it into ./bin/
curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s v1.26.0

# In alpine linux (as it does not come with curl by default)
wget -O- -nv https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s v1.26.0

golangci-lint --version

It is advised that you periodically update version of golangci-lint as the project is under active development and is constantly being improved. For any problems with golangci-lint, check out recent GitHub issues and update if needed.

macOS

You can also install a binary release on macOS using brew:

brew install golangci/tap/golangci-lint
brew upgrade golangci/tap/golangci-lint

Docker

docker run --rm -v $(pwd):/app -w /app golangci/golangci-lint:v1.26.0 golangci-lint run -v

Go

Go source installations are supported for the two most recent Go releases.

GO111MODULE=on go get github.com/golangci/golangci-lint/cmd/[email protected]

Trusted By

The following companies/products use golangci-lint:

The following great projects use golangci-lint:

Quick Start

To run golangci-lint execute:

golangci-lint run

It's an equivalent of executing:

golangci-lint run ./...

You can choose which directories and files to analyze:

golangci-lint run dir1 dir2/... dir3/file1.go

Directories are NOT analyzed recursively. To analyze them recursively append /... to their path.

GolangCI-Lint can be used with zero configuration. By default the following linters are enabled:

$ golangci-lint help linters
Enabled by default linters:
deadcode: Finds unused code [fast: true, auto-fix: false]
errcheck: Errcheck is a program for checking for unchecked errors in go programs. These unchecked errors can be critical bugs in some cases [fast: true, auto-fix: false]
gosimple (megacheck): Linter for Go source code that specializes in simplifying a code [fast: true, auto-fix: false]
govet (vet, vetshadow): Vet examines Go source code and reports suspicious constructs, such as Printf calls whose arguments do not align with the format string [fast: true, auto-fix: false]
ineffassign: Detects when assignments to existing variables are not used [fast: true, auto-fix: false]
staticcheck (megacheck): Staticcheck is a go vet on steroids, applying a ton of static analysis checks [fast: true, auto-fix: false]
structcheck: Finds unused struct fields [fast: true, auto-fix: false]
typecheck: Like the front-end of a Go compiler, parses and type-checks Go code [fast: true, auto-fix: false]
unused (megacheck): Checks Go code for unused constants, variables, functions and types [fast: false, auto-fix: false]
varcheck: Finds unused global variables and constants [fast: true, auto-fix: false]

and the following linters are disabled by default:

$ golangci-lint help linters
...
Disabled by default linters:
asciicheck: Simple linter to check that your code does not contain non-ASCII identifiers [fast: true, auto-fix: false]
bodyclose: checks whether HTTP response body is closed successfully [fast: true, auto-fix: false]
depguard: Go linter that checks if package imports are in a list of acceptable packages [fast: true, auto-fix: false]
dogsled: Checks assignments with too many blank identifiers (e.g. x, _, _, _, := f()) [fast: true, auto-fix: false]
dupl: Tool for code clone detection [fast: true, auto-fix: false]
funlen: Tool for detection of long functions [fast: true, auto-fix: false]
gochecknoglobals: Checks that no globals are present in Go code [fast: true, auto-fix: false]
gochecknoinits: Checks that no init functions are present in Go code [fast: true, auto-fix: false]
gocognit: Computes and checks the cognitive complexity of functions [fast: true, auto-fix: false]
goconst: Finds repeated strings that could be replaced by a constant [fast: true, auto-fix: false]
gocritic: The most opinionated Go source code linter [fast: true, auto-fix: false]
gocyclo: Computes and checks the cyclomatic complexity of functions [fast: true, auto-fix: false]
godot: Check if comments end in a period [fast: true, auto-fix: false]
godox: Tool for detection of FIXME, TODO and other comment keywords [fast: true, auto-fix: false]
goerr113: Golang linter to check the errors handling expressions [fast: true, auto-fix: false]
gofmt: Gofmt checks whether code was gofmt-ed. By default this tool runs with -s option to check for code simplification [fast: true, auto-fix: true]
goimports: Goimports does everything that gofmt does. Additionally it checks unused imports [fast: true, auto-fix: true]
golint: Golint differs from gofmt. Gofmt reformats Go source code, whereas golint prints out style mistakes [fast: true, auto-fix: false]
gomnd: An analyzer to detect magic numbers. [fast: true, auto-fix: false]
gomodguard: Allow and block list linter for direct Go module dependencies. [fast: true, auto-fix: false]
goprintffuncname: Checks that printf-like functions are named with `f` at the end [fast: true, auto-fix: false]
gosec (gas): Inspects source code for security problems [fast: true, auto-fix: false]
interfacer: Linter that suggests narrower interface types [fast: true, auto-fix: false]
lll: Reports long lines [fast: true, auto-fix: false]
maligned: Tool to detect Go structs that would take less memory if their fields were sorted [fast: true, auto-fix: false]
misspell: Finds commonly misspelled English words in comments [fast: true, auto-fix: true]
nakedret: Finds naked returns in functions greater than a specified function length [fast: true, auto-fix: false]
nestif: Reports deeply nested if statements [fast: true, auto-fix: false]
nolintlint: Reports ill-formed or insufficient nolint directives [fast: true, auto-fix: false]
prealloc: Finds slice declarations that could potentially be preallocated [fast: true, auto-fix: false]
rowserrcheck: checks whether Err of rows is checked successfully [fast: true, auto-fix: false]
scopelint: Scopelint checks for unpinned variables in go programs [fast: true, auto-fix: false]
stylecheck: Stylecheck is a replacement for golint [fast: true, auto-fix: false]
testpackage: linter that makes you use a separate _test package [fast: true, auto-fix: false]
unconvert: Remove unnecessary type conversions [fast: true, auto-fix: false]
unparam: Reports unused function parameters [fast: true, auto-fix: false]
whitespace: Tool for detection of leading and trailing whitespace [fast: true, auto-fix: true]
wsl: Whitespace Linter - Forces you to use empty lines! [fast: true, auto-fix: false]

Pass -E/--enable to enable linter and -D/--disable to disable:

golangci-lint run --disable-all -E errcheck

Editor Integration

Go for Visual Studio Code. Recommended settings for VS Code are:
```
"go.lintTool":"golangci-lint",
"go.lintFlags": [
  "--fast"
]
```
Using it in an editor without --fast can freeze your editor. Golangci-lint automatically discovers .golangci.yml config for edited file: you don't need to configure it in VS Code settings.
Sublime Text - plugin for SublimeLinter.
GoLand
- Add File Watcher using existing golangci-lint template.
- If your version of GoLand does not have the golangci-lint File Watcher template you can configure your own and use arguments run --disable=typecheck $FileDir$.
GNU Emacs
- Spacemacs
- flycheck checker.
Vim
- vim-go
- syntastic merged pull request with golangci-lint support
- ale merged pull request with golangci-lint support
Atom - go-plus supports golangci-lint.

Shell Completion

golangci-lint can generate bash completion file.

macOS

There are two versions of bash-completion, v1 and v2. V1 is for Bash 3.2 (which is the default on macOS), and v2 is for Bash 4.1+. The golangci-lint completion script doesn’t work correctly with bash-completion v1 and Bash 3.2. It requires bash-completion v2 and Bash 4.1+. Thus, to be able to correctly use golangci-lint completion on macOS, you have to install and use Bash 4.1+ (instructions). The following instructions assume that you use Bash 4.1+ (that is, any Bash version of 4.1 or newer).

Install bash-completion v2:

brew install bash-completion@2
echo 'export BASH_COMPLETION_COMPAT_DIR="/usr/local/etc/bash_completion.d"' >>~/.bashrc
echo '[[ -r "/usr/local/etc/profile.d/bash_completion.sh" ]] && . "/usr/local/etc/profile.d/bash_completion.sh"' >>~/.bashrc
exec bash # reload and replace (if it was updated) shell
type _init_completion && echo "completion is OK" # verify that bash-completion v2 is correctly installed

Add golangci-lint bash completion:

echo 'source <(golangci-lint completion bash)' >>~/.bashrc
source ~/.bashrc

Linux

See kubectl instructions and don't forget to replace kubectl with golangci-lint.

Comparison

`golangci-lint` vs `gometalinter`

GolangCI-Lint was created to fix the following issues with gometalinter:

Slow work: gometalinter usually works for minutes in average projects. GolangCI-Lint works 2-7x times faster by reusing work.
Huge memory consumption: parallel linters don't share the same program representation and can consume n times more memory (n - concurrency). GolangCI-Lint fixes it by sharing representation and consumes 26% less memory.
Doesn't use real bounded concurrency: if you set it to n it can take up to n*n threads because of forced threads in specific linters. gometalinter can't do anything about it because it runs linters as black boxes in forked processes. In GolangCI-Lint we run all linters in one process and completely control them. Configured concurrency will be correctly bounded. This issue is important because you often want to set concurrency to the CPUs count minus one to ensure you do not freeze your PC and be able to work on it while analyzing code.
Lack of nice output. We like how the gcc and clang compilers format their warnings: using colors, printing warning lines and showing the position in line.
Too many issues. GolangCI-Lint cuts a lot of issues by using default exclude list of common false-positives. By default, it has enabled smart issues processing: merge multiple issues for one line, merge issues with the same text or from the same linter. All of these smart processors can be configured by the user.
Integration into large codebases. A good way to start using linters in a large project is not to fix a plethora of existing issues, but to set up CI and fix only issues in new commits. You can use revgrep for it, but it's yet another utility to install and configure. With golangci-lint it's much easier: revgrep is already built into golangci-lint and you can use it with one option (-n, --new or --new-from-rev).
Installation. With gometalinter, you need to run a linters installation step. It's easy to forget this step and end up with stale linters. It also complicates CI setup. GolangCI-Lint requires no installation of linters.
Yaml or toml config. Gometalinter's JSON isn't convenient for config files.

`golangci-lint` vs Running Linters Manually

It will be much slower because golangci-lint runs all linters in parallel and shares 50-80% of linters work.
It will have less control and more false-positives: some linters can't be properly configured without hacks.
It will take more time because of different usages and need of tracking of versions of n linters.

Performance

Benchmarks were executed on MacBook Pro (Retina, 13-inch, Late 2013), 2,4 GHz Intel Core i5, 8 GB 1600 MHz DDR3. It has 4 cores and concurrent linting as a default consuming all cores. Benchmark was run (and measured) automatically, see the code here (BenchmarkWithGometalinter).

We measure peak memory usage (RSS) by tracking of processes RSS every 5 ms.

Comparison with gometalinter

We compare golangci-lint and gometalinter in default mode, but explicitly enable all linters because of small differences in the default configuration.

$ golangci-lint run --no-config --issues-exit-code=0 --timeout=30m \
  --disable-all --enable=deadcode  --enable=gocyclo --enable=golint --enable=varcheck \
  --enable=structcheck --enable=maligned --enable=errcheck --enable=dupl --enable=ineffassign \
  --enable=interfacer --enable=unconvert --enable=goconst --enable=gosec --enable=megacheck
$ gometalinter --deadline=30m --vendor --cyclo-over=30 --dupl-threshold=150 \
  --exclude=<default golangci-lint excludes> --skip=testdata --skip=builtin \
  --disable-all --enable=deadcode  --enable=gocyclo --enable=golint --enable=varcheck \
  --enable=structcheck --enable=maligned --enable=errcheck --enable=dupl --enable=ineffassign \
  --enable=interfacer --enable=unconvert --enable=goconst --enable=gosec --enable=megacheck
  ./...

Repository	GolangCI Time	GolangCI Is Faster than Gometalinter	GolangCI Memory	GolangCI eats less memory than Gometalinter
gometalinter repo, 4 kLoC	6s	6.4x	0.7GB	33%
self-repo, 4 kLoC	12s	7.5x	1.2GB	41%
beego, 50 kLoC	10s	4.2x	1.4GB	9%
hugo, 70 kLoC	15s	6.1x	1.6GB	44%
consul, 127 kLoC	58s	4x	2.7GB	41%
terraform, 190 kLoC	2m13s	1.6x	4.8GB	0%
go-ethereum, 250 kLoC	33s	5x	3.6GB	0%
go source (`$GOROOT/src`), 1300 kLoC	2m45s	2x	4.7GB	0%

On average golangci-lint is 4.6 times faster than gometalinter. Maximum difference is in the self-repo: 7.5 times faster, minimum difference is in terraform source code repo: 1.8 times faster.

On average golangci-lint consumes 26% less memory.

Why golangci-lint is faster

Golangci-lint directly calls linters (no forking) and reuses 80% of work by parsing program only once. Read this section for details.

Memory Usage of Golangci-lint

A trade-off between memory usage and execution time can be controlled by GOGC environment variable. Less GOGC values trigger garbage collection more frequently and golangci-lint consumes less memory and more CPU. Below is the trade-off table for running on this repo:

`GOGC`	Peak Memory, GB	Executon Time, s
`5`	1.1	60
`10`	1.1	34
`20`	1.3	25
`30`	1.6	20.2
`50`	2.0	17.1
`80`	2.2	14.1
`100` (default)	2.2	13.8
`off`	3.2	9.3

Internals

Work sharing The key difference with gometalinter is that golangci-lint shares work between specific linters (golint, govet, ...). We don't fork to call specific linter but use its API. For small and medium projects 50-90% of work between linters can be reused.
- load []*packages.Package by go/packages once
  
  We load program (parsing all files and type-checking) only once for all linters. For the most of linters it's the most heavy operation: it takes 5 seconds on 8 kLoC repo and 11 seconds on $GOROOT/src.
- build ssa.Program once
  
  Some linters (megacheck, interfacer, unparam) work on SSA representation. Building of this representation takes 1.5 seconds on 8 kLoC repo and 6 seconds on $GOROOT/src.
- parse source code and build AST once
  
  Parsing one source file takes 200 us on average. Parsing of all files in $GOROOT/src takes 2 seconds. Currently we parse each file more than once because it's not the bottleneck. But we already save a lot of extra parsing. We're planning to parse each file only once.
- walk files and directories once
  
  It takes 300-1000 ms for $GOROOT/src.
Smart linters scheduling

We schedule linters by a special algorithm which takes estimated execution time into account. It allows to save 10-30% of time when one of heavy linters (megacheck etc) is enabled.
Don't fork to run shell commands

All linters has their version fixed with go modules, they are builtin and you don't need to install them separately.

Supported Linters

To see a list of supported linters and which linters are enabled/disabled:

golangci-lint help linters

Enabled By Default Linters

govet - Vet examines Go source code and reports suspicious constructs, such as Printf calls whose arguments do not align with the format string
errcheck - Errcheck is a program for checking for unchecked errors in go programs. These unchecked errors can be critical bugs in some cases
staticcheck - Staticcheck is a go vet on steroids, applying a ton of static analysis checks
unused - Checks Go code for unused constants, variables, functions and types
gosimple - Linter for Go source code that specializes in simplifying a code
structcheck - Finds unused struct fields
varcheck - Finds unused global variables and constants
ineffassign - Detects when assignments to existing variables are not used
deadcode - Finds unused code
typecheck - Like the front-end of a Go compiler, parses and type-checks Go code

Disabled By Default Linters (`-E/--enable`)

bodyclose - checks whether HTTP response body is closed successfully
golint - Golint differs from gofmt. Gofmt reformats Go source code, whereas golint prints out style mistakes
rowserrcheck - checks whether Err of rows is checked successfully
stylecheck - Stylecheck is a replacement for golint
gosec - Inspects source code for security problems
interfacer - Linter that suggests narrower interface types
unconvert - Remove unnecessary type conversions
dupl - Tool for code clone detection
goconst - Finds repeated strings that could be replaced by a constant
gocyclo - Computes and checks the cyclomatic complexity of functions
gocognit - Computes and checks the cognitive complexity of functions
asciicheck - Simple linter to check that your code does not contain non-ASCII identifiers
gofmt - Gofmt checks whether code was gofmt-ed. By default this tool runs with -s option to check for code simplification
goimports - Goimports does everything that gofmt does. Additionally it checks unused imports
maligned - Tool to detect Go structs that would take less memory if their fields were sorted
depguard - Go linter that checks if package imports are in a list of acceptable packages
misspell - Finds commonly misspelled English words in comments
lll - Reports long lines
unparam - Reports unused function parameters
dogsled - Checks assignments with too many blank identifiers (e.g. x, _, _, _, := f())
nakedret - Finds naked returns in functions greater than a specified function length
prealloc - Finds slice declarations that could potentially be preallocated
scopelint - Scopelint checks for unpinned variables in go programs
gocritic - The most opinionated Go source code linter
gochecknoinits - Checks that no init functions are present in Go code
gochecknoglobals - Checks that no globals are present in Go code
godox - Tool for detection of FIXME, TODO and other comment keywords
funlen - Tool for detection of long functions
whitespace - Tool for detection of leading and trailing whitespace
wsl - Whitespace Linter - Forces you to use empty lines!
goprintffuncname - Checks that printf-like functions are named with f at the end
gomnd - An analyzer to detect magic numbers.
goerr113 - Golang linter to check the errors handling expressions
gomodguard - Allow and block list linter for direct Go module dependencies.
godot - Check if comments end in a period
testpackage - linter that makes you use a separate _test package
nestif - Reports deeply nested if statements
nolintlint - Reports ill-formed or insufficient nolint directives

Configuration

The config file has lower priority than command-line options. If the same bool/string/int option is provided on the command-line and in the config file, the option from command-line will be used. Slice options (e.g. list of enabled/disabled linters) are combined from the command-line and config file.

To see a list of enabled by your configuration linters:

golangci-lint linters

Command-Line Options

golangci-lint run -h
Usage:
  golangci-lint run [flags]

Flags:
      --out-format string              Format of output: colored-line-number|line-number|json|tab|checkstyle|code-climate|junit-xml|github-actions (default "colored-line-number")
      --print-issued-lines             Print lines of code with issue (default true)
      --print-linter-name              Print linter name in issue line (default true)
      --uniq-by-line                   Make issues output unique by line (default true)
      --modules-download-mode string   Modules download mode. If not empty, passed as -mod=<mode> to go tools
      --issues-exit-code int           Exit code when issues were found (default 1)
      --build-tags strings             Build tags
      --timeout duration               Timeout for total work (default 1m0s)
      --tests                          Analyze tests (*_test.go) (default true)
      --print-resources-usage          Print avg and max memory usage of golangci-lint and total time
  -c, --config PATH                    Read config from file path PATH
      --no-config                      Don't read config
      --skip-dirs strings              Regexps of directories to skip
      --skip-dirs-use-default          Use or not use default excluded directories:
                                         - (^|/)vendor($|/)
                                         - (^|/)third_party($|/)
                                         - (^|/)testdata($|/)
                                         - (^|/)examples($|/)
                                         - (^|/)Godeps($|/)
                                         - (^|/)builtin($|/)
                                        (default true)
      --skip-files strings             Regexps of files to skip
  -E, --enable strings                 Enable specific linter
  -D, --disable strings                Disable specific linter
      --disable-all                    Disable all linters
  -p, --presets strings                Enable presets (bugs|complexity|format|performance|style|unused) of linters. Run 'golangci-lint linters' to see them. This option implies option --disable-all
      --fast                           Run only fast linters from enabled linters set (first run won't be fast)
  -e, --exclude strings                Exclude issue by regexp
      --exclude-use-default            Use or not use default excludes:
                                         # EXC0001 errcheck: Almost all programs ignore errors on these functions and in most cases it's ok
                                         - Error return value of .((os\.)?std(out|err)\..*|.*Close|.*Flush|os\.Remove(All)?|.*printf?|os\.(Un)?Setenv). is not checked
                                       
                                         # EXC0002 golint: Annoying issue about not having a comment. The rare codebase has such comments
                                         - (comment on exported (method|function|type|const)|should have( a package)? comment|comment should be of the form)
                                       
                                         # EXC0003 golint: False positive when tests are defined in package 'test'
                                         - func name will be used as test\.Test.* by other packages, and that stutters; consider calling this
                                       
                                         # EXC0004 govet: Common false positives
                                         - (possible misuse of unsafe.Pointer|should have signature)
                                       
                                         # EXC0005 staticcheck: Developers tend to write in C-style with an explicit 'break' in a 'switch', so it's ok to ignore
                                         - ineffective break statement. Did you mean to break out of the outer loop
                                       
                                         # EXC0006 gosec: Too many false-positives on 'unsafe' usage
                                         - Use of unsafe calls should be audited
                                       
                                         # EXC0007 gosec: Too many false-positives for parametrized shell calls
                                         - Subprocess launch(ed with variable|ing should be audited)
                                       
                                         # EXC0008 gosec: Duplicated errcheck checks
                                         - (G104|G307)
                                       
                                         # EXC0009 gosec: Too many issues in popular repos
                                         - (Expect directory permissions to be 0750 or less|Expect file permissions to be 0600 or less)
                                       
                                         # EXC0010 gosec: False positive is triggered by 'src, err := ioutil.ReadFile(filename)'
                                         - Potential file inclusion via variable
                                        (default true)
      --exclude-case-sensitive         If set to true exclude and exclude rules regular expressions are case sensitive
      --max-issues-per-linter int      Maximum issues count per one linter. Set to 0 to disable (default 50)
      --max-same-issues int            Maximum count of issues with the same text. Set to 0 to disable (default 3)
  -n, --new                            Show only new issues: if there are unstaged changes or untracked files, only those changes are analyzed, else only changes in HEAD~ are analyzed.
                                       It's a super-useful option for integration of golangci-lint into existing large codebase.
                                       It's not practical to fix all existing issues at the moment of integration: much better to not allow issues in new code.
                                       For CI setups, prefer --new-from-rev=HEAD~, as --new can skip linting the current patch if any scripts generate unstaged files before golangci-lint runs.
      --new-from-rev REV               Show only new issues created after git revision REV
      --new-from-patch PATH            Show only new issues created in git patch with file path PATH
      --fix                            Fix found issues (if it's supported by the linter)
  -h, --help                           help for run

Global Flags:
      --color string              Use color when printing; can be 'always', 'auto', or 'never' (default "auto")
  -j, --concurrency int           Concurrency (default NumCPU) (default 8)
      --cpu-profile-path string   Path to CPU profile output file
      --mem-profile-path string   Path to memory profile output file
      --trace-path string         Path to trace output file
  -v, --verbose                   verbose output
      --version                   Print version

Config File

GolangCI-Lint looks for config files in the following paths from the current working directory:

.golangci.yml
.golangci.toml
.golangci.json

GolangCI-Lint also searches for config files in all directories from the directory of the first analyzed path up to the root. To see which config file is being used and where it was sourced from run golangci-lint with -v option.

Config options inside the file are identical to command-line options. You can configure specific linters' options only within the config file (not the command-line).

There is a .golangci.example.yml example config file with all supported options, their description and default value:

# This file contains all available configuration options
# with their default values.

# options for analysis running
run:
  # default concurrency is a available CPU number
  concurrency: 4

  # timeout for analysis, e.g. 30s, 5m, default is 1m
  timeout: 1m

  # exit code when at least one issue was found, default is 1
  issues-exit-code: 1

  # include test files or not, default is true
  tests: true

  # list of build tags, all linters use it. Default is empty list.
  build-tags:
    - mytag

  # which dirs to skip: issues from them won't be reported;
  # can use regexp here: generated.*, regexp is applied on full path;
  # default value is empty list, but default dirs are skipped independently
  # from this option's value (see skip-dirs-use-default).
  skip-dirs:
    - src/external_libs
    - autogenerated_by_my_lib

  # default is true. Enables skipping of directories:
  #   vendor$, third_party$, testdata$, examples$, Godeps$, builtin$
  skip-dirs-use-default: true

  # which files to skip: they will be analyzed, but issues from them
  # won't be reported. Default value is empty list, but there is
  # no need to include all autogenerated files, we confidently recognize
  # autogenerated files. If it's not please let us know.
  skip-files:
    - ".*\\.my\\.go$"
    - lib/bad.go

  # by default isn't set. If set we pass it to "go list -mod={option}". From "go help modules":
  # If invoked with -mod=readonly, the go command is disallowed from the implicit
  # automatic updating of go.mod described above. Instead, it fails when any changes
  # to go.mod are needed. This setting is most useful to check that go.mod does
  # not need updates, such as in a continuous integration and testing system.
  # If invoked with -mod=vendor, the go command assumes that the vendor
  # directory holds the correct copies of dependencies and ignores
  # the dependency descriptions in go.mod.
  modules-download-mode: readonly|release|vendor


# output configuration options
output:
  # colored-line-number|line-number|json|tab|checkstyle|code-climate, default is "colored-line-number"
  format: colored-line-number

  # print lines of code with issue, default is true
  print-issued-lines: true

  # print linter name in the end of issue text, default is true
  print-linter-name: true

  # make issues output unique by line, default is true
  uniq-by-line: true


# all available settings of specific linters
linters-settings:
  dogsled:
    # checks assignments with too many blank identifiers; default is 2
    max-blank-identifiers: 2
  dupl:
    # tokens count to trigger issue, 150 by default
    threshold: 100
  errcheck:
    # report about not checking of errors in type assertions: `a := b.(MyStruct)`;
    # default is false: such cases aren't reported by default.
    check-type-assertions: false

    # report about assignment of errors to blank identifier: `num, _ := strconv.Atoi(numStr)`;
    # default is false: such cases aren't reported by default.
    check-blank: false

    # [deprecated] comma-separated list of pairs of the form pkg:regex
    # the regex is used to ignore names within pkg. (default "fmt:.*").
    # see https://github.com/kisielk/errcheck#the-deprecated-method for details
    ignore: fmt:.*,io/ioutil:^Read.*

    # path to a file containing a list of functions to exclude from checking
    # see https://github.com/kisielk/errcheck#excluding-functions for details
    exclude: /path/to/file.txt
  funlen:
    lines: 60
    statements: 40
  gocognit:
    # minimal code complexity to report, 30 by default (but we recommend 10-20)
    min-complexity: 10
  nestif:
    # minimal complexity of if statements to report, 5 by default
    min-complexity: 4
  goconst:
    # minimal length of string constant, 3 by default
    min-len: 3
    # minimal occurrences count to trigger, 3 by default
    min-occurrences: 3
  gocritic:
    # Which checks should be enabled; can't be combined with 'disabled-checks';
    # See https://go-critic.github.io/overview#checks-overview
    # To check which checks are enabled run `GL_DEBUG=gocritic golangci-lint run`
    # By default list of stable checks is used.
    enabled-checks:
      - rangeValCopy

    # Which checks should be disabled; can't be combined with 'enabled-checks'; default is empty
    disabled-checks:
      - regexpMust

    # Enable multiple checks by tags, run `GL_DEBUG=gocritic golangci-lint run` to see all tags and checks.
    # Empty list by default. See https://github.com/go-critic/go-critic#usage -> section "Tags".
    enabled-tags:
      - performance
    disabled-tags:
      - experimental

    settings: # settings passed to gocritic
      captLocal: # must be valid enabled check name
        paramsOnly: true
      rangeValCopy:
        sizeThreshold: 32
  gocyclo:
    # minimal code complexity to report, 30 by default (but we recommend 10-20)
    min-complexity: 10
  godot:
    # check all top-level comments, not only declarations
    check-all: false
  godox:
    # report any comments starting with keywords, this is useful for TODO or FIXME comments that
    # might be left in the code accidentally and should be resolved before merging
    keywords: # default keywords are TODO, BUG, and FIXME, these can be overwritten by this setting
      - NOTE
      - OPTIMIZE # marks code that should be optimized before merging
      - HACK # marks hack-arounds that should be removed before merging
  gofmt:
    # simplify code: gofmt with `-s` option, true by default
    simplify: true
  goimports:
    # put imports beginning with prefix after 3rd-party packages;
    # it's a comma-separated list of prefixes
    local-prefixes: github.com/org/project
  golint:
    # minimal confidence for issues, default is 0.8
    min-confidence: 0.8
  gomnd:
    settings:
      mnd:
        # the list of enabled checks, see https://github.com/tommy-muehle/go-mnd/#checks for description.
        checks: argument,case,condition,operation,return,assign
  gomodguard:
    allowed:
      modules:                                                        # List of allowed modules
        # - gopkg.in/yaml.v2
      domains:                                                        # List of allowed module domains
        # - golang.org
    blocked:
      modules:                                                        # List of blocked modules
        # - github.com/uudashr/go-module:                             # Blocked module
        #     recommendations:                                        # Recommended modules that should be used instead (Optional)
        #       - golang.org/x/mod                           
        #     reason: "`mod` is the official go.mod parser library."  # Reason why the recommended module should be used (Optional)    
  govet:
    # report about shadowed variables
    check-shadowing: true

    # settings per analyzer
    settings:
      printf: # analyzer name, run `go tool vet help` to see all analyzers
        funcs: # run `go tool vet help printf` to see available settings for `printf` analyzer
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Infof
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Warnf
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Errorf
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Fatalf

    # enable or disable analyzers by name
    enable:
      - atomicalign
    enable-all: false
    disable:
      - shadow
    disable-all: false
  depguard:
    list-type: blacklist
    include-go-root: false
    packages:
      - github.com/sirupsen/logrus
    packages-with-error-message:
      # specify an error message to output when a blacklisted package is used
      - github.com/sirupsen/logrus: "logging is allowed only by logutils.Log"
  lll:
    # max line length, lines longer will be reported. Default is 120.
    # '\t' is counted as 1 character by default, and can be changed with the tab-width option
    line-length: 120
    # tab width in spaces. Default to 1.
    tab-width: 1
  maligned:
    # print struct with more effective memory layout or not, false by default
    suggest-new: true
  misspell:
    # Correct spellings using locale preferences for US or UK.
    # Default is to use a neutral variety of English.
    # Setting locale to US will correct the British spelling of 'colour' to 'color'.
    locale: US
    ignore-words:
      - someword
  nakedret:
    # make an issue if func has more lines of code than this setting and it has naked returns; default is 30
    max-func-lines: 30
  prealloc:
    # XXX: we don't recommend using this linter before doing performance profiling.
    # For most programs usage of prealloc will be a premature optimization.

    # Report preallocation suggestions only on simple loops that have no returns/breaks/continues/gotos in them.
    # True by default.
    simple: true
    range-loops: true # Report preallocation suggestions on range loops, true by default
    for-loops: false # Report preallocation suggestions on for loops, false by default
  nolintlint:
    # Enable to ensure that nolint directives are all used. Default is true.
    allow-unused: false
    # Disable to ensure that nolint directives don't have a leading space. Default is true.
    allow-leading-space: true
    # Exclude following linters from requiring an explanation.  Default is [].
    allow-no-explanation: []
    # Enable to require an explanation after each nolint directive. Default is false.
    require-explanation: true
    # Enable to require an explanation after each nolint directive. Default is false.
    require-specific: true
  rowserrcheck:
    packages:
      - github.com/jmoiron/sqlx
  testpackage:
    # regexp pattern to skip files
    skip-regexp: (export|internal)_test\.go
  unparam:
    # Inspect exported functions, default is false. Set to true if no external program/library imports your code.
    # XXX: if you enable this setting, unparam will report a lot of false-positives in text editors:
    # if it's called for subdir of a project it can't find external interfaces. All text editor integrations
    # with golangci-lint call it on a directory with the changed file.
    check-exported: false
  unused:
    # treat code as a program (not a library) and report unused exported identifiers; default is false.
    # XXX: if you enable this setting, unused will report a lot of false-positives in text editors:
    # if it's called for subdir of a project it can't find funcs usages. All text editor integrations
    # with golangci-lint call it on a directory with the changed file.
    check-exported: false
  whitespace:
    multi-if: false   # Enforces newlines (or comments) after every multi-line if statement
    multi-func: false # Enforces newlines (or comments) after every multi-line function signature
  wsl:
    # If true append is only allowed to be cuddled if appending value is
    # matching variables, fields or types on line above. Default is true.
    strict-append: true
    # Allow calls and assignments to be cuddled as long as the lines have any
    # matching variables, fields or types. Default is true.
    allow-assign-and-call: true
    # Allow multiline assignments to be cuddled. Default is true.
    allow-multiline-assign: true
    # Allow declarations (var) to be cuddled.
    allow-cuddle-declarations: false
    # Allow trailing comments in ending of blocks
    allow-trailing-comment: false
    # Force newlines in end of case at this limit (0 = never).
    force-case-trailing-whitespace: 0
    # Force cuddling of err checks with err var assignment
    force-err-cuddling: false
    # Allow leading comments to be separated with empty liens
    allow-separated-leading-comment: false

  # The custom section can be used to define linter plugins to be loaded at runtime. See README doc
  #  for more info.
  custom:
    # Each custom linter should have a unique name.
     example:
      # The path to the plugin *.so. Can be absolute or local. Required for each custom linter
      path: /path/to/example.so
      # The description of the linter. Optional, just for documentation purposes.
      description: This is an example usage of a plugin linter.
      # Intended to point to the repo location of the linter. Optional, just for documentation purposes.
      original-url: github.com/golangci/example-linter

linters:
  enable:
    - megacheck
    - govet
  disable:
    - maligned
    - prealloc
  disable-all: false
  presets:
    - bugs
    - unused
  fast: false


issues:
  # List of regexps of issue texts to exclude, empty list by default.
  # But independently from this option we use default exclude patterns,
  # it can be disabled by `exclude-use-default: false`. To list all
  # excluded by default patterns execute `golangci-lint run --help`
  exclude:
    - abcdef

  # Excluding configuration per-path, per-linter, per-text and per-source
  exclude-rules:
    # Exclude some linters from running on tests files.
    - path: _test\.go
      linters:
        - gocyclo
        - errcheck
        - dupl
        - gosec

    # Exclude known linters from partially hard-vendored code,
    # which is impossible to exclude via "nolint" comments.
    - path: internal/hmac/
      text: "weak cryptographic primitive"
      linters:
        - gosec

    # Exclude some staticcheck messages
    - linters:
        - staticcheck
      text: "SA9003:"

    # Exclude lll issues for long lines with go:generate
    - linters:
        - lll
      source: "^//go:generate "

  # Independently from option `exclude` we use default exclude patterns,
  # it can be disabled by this option. To list all
  # excluded by default patterns execute `golangci-lint run --help`.
  # Default value for this option is true.
  exclude-use-default: false

  # The default value is false. If set to true exclude and exclude-rules
  # regular expressions become case sensitive.
  exclude-case-sensitive: false

  # The list of ids of default excludes to include or disable. By default it's empty.
  include:
    - EXC0002 # disable excluding of issues about comments from golint

  # Maximum issues count per one linter. Set to 0 to disable. Default is 50.
  max-issues-per-linter: 0

  # Maximum count of issues with the same text. Set to 0 to disable. Default is 3.
  max-same-issues: 0

  # Show only new issues: if there are unstaged changes or untracked files,
  # only those changes are analyzed, else only changes in HEAD~ are analyzed.
  # It's a super-useful option for integration of golangci-lint into existing
  # large codebase. It's not practical to fix all existing issues at the moment
  # of integration: much better don't allow issues in new code.
  # Default is false.
  new: false

  # Show only new issues created after git revision `REV`
  new-from-rev: REV

  # Show only new issues created in git patch with set file path.
  new-from-patch: path/to/patch/file

It's a .golangci.yml config file of this repo: we enable more linters than the default and have more strict settings:

linters-settings:
  depguard:
    list-type: blacklist
    packages:
      # logging is allowed only by logutils.Log, logrus
      # is allowed to use only in logutils package
      - github.com/sirupsen/logrus
    packages-with-error-message:
      - github.com/sirupsen/logrus: "logging is allowed only by logutils.Log"
  dupl:
    threshold: 100
  funlen:
    lines: 100
    statements: 50
  goconst:
    min-len: 2
    min-occurrences: 2
  gocritic:
    enabled-tags:
      - diagnostic
      - experimental
      - opinionated
      - performance
      - style
    disabled-checks:
      - dupImport # https://github.com/go-critic/go-critic/issues/845
      - ifElseChain
      - octalLiteral
      - whyNoLint
      - wrapperFunc
  gocyclo:
    min-complexity: 15
  goimports:
    local-prefixes: github.com/golangci/golangci-lint
  golint:
    min-confidence: 0
  gomnd:
    settings:
      mnd:
        # don't include the "operation" and "assign"
        checks: argument,case,condition,return
  govet:
    check-shadowing: true
    settings:
      printf:
        funcs:
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Infof
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Warnf
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Errorf
          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Fatalf
  lll:
    line-length: 140
  maligned:
    suggest-new: true
  misspell:
    locale: US
  nolintlint:
    allow-leading-space: true # don't require machine-readable nolint directives (i.e. with no leading space)
    allow-unused: false # report any unused nolint directives
    require-explanation: false # don't require an explanation for nolint directives
    require-specific: false # don't require nolint directives to be specific about which linter is being skipped

linters:
  # please, do not use `enable-all`: it's deprecated and will be removed soon.
  # inverted configuration with `enable-all` and `disable` is not scalable during updates of golangci-lint
  disable-all: true
  enable:
    - bodyclose
    - deadcode
    - depguard
    - dogsled
    - dupl
    - errcheck
    - funlen
    - gochecknoinits
    - goconst
    - gocritic
    - gocyclo
    - gofmt
    - goimports
    - golint
    - gomnd
    - goprintffuncname
    - gosec
    - gosimple
    - govet
    - ineffassign
    - interfacer
    - lll
    - misspell
    - nakedret
    - nolintlint
    - rowserrcheck
    - scopelint
    - staticcheck
    - structcheck
    - stylecheck
    - typecheck
    - unconvert
    - unparam
    - unused
    - varcheck
    - whitespace

  # don't enable:
  # - gochecknoglobals
  # - gocognit
  # - godox
  # - maligned
  # - prealloc

issues:
  # Excluding configuration per-path, per-linter, per-text and per-source
  exclude-rules:
    - path: _test\.go
      linters:
        - gomnd

run:
  skip-dirs:
    - test/testdata_etc
    - internal/cache
    - internal/renameio
    - internal/robustio

# golangci.com configuration
# https://github.com/golangci/golangci/wiki/Configuration
service:
  golangci-lint-version: 1.23.x # use the fixed version to not introduce new linters unexpectedly
  prepare:
    - echo "here I can run custom commands, but no preparation needed for this repo"

Custom Linters

Some people and organizations may choose to have custom made linters run as a part of golangci-lint. That functionality is supported through go's plugin library.

Create a Copy of `golangci-lint` that Can Run with Plugins

In order to use plugins, you'll need a golangci-lint executable that can run them. The normal version of this project is built with the vendors option, which breaks plugins that have overlapping dependencies.

Download golangci-lint source code
From the projects root directory, run make vendor_free_build
Copy the golangci-lint executable that was created to your path, project, or other location

Configure Your Project for Linting

If you already have a linter plugin available, you can follow these steps to define it's usage in a projects .golangci.yml file. An example linter can be found at here. If you're looking for instructions on how to configure your own custom linter, they can be found further down.

If the project you want to lint does not have one already, copy the .golangci.yml to the root directory.
Adjust the yaml to appropriate linters-settings:custom entries as so:

linters-settings:
 custom:
  example:
   path: /example.so
   description: The description of the linter
   original-url: github.com/golangci/example-linter

That is all the configuration that is required to run a custom linter in your project. Custom linters are enabled by default, but abide by the same rules as other linters. If the disable all option is specified either on command line or in .golangci.yml files linters:disable-all: true, custom linters will be disabled; they can be re-enabled by adding them to the linters:enable list, or providing the enabled option on the command line, golangci-lint run -Eexample.

To Create Your Own Custom Linter

Your linter must implement one or more golang.org/x/tools/go/analysis.Analyzer structs. Your project should also use go.mod. All versions of libraries that overlap golangci-lint (including replaced libraries) MUST be set to the same version as golangci-lint. You can see the versions by running go version -m golangci-lint.

You'll also need to create a go file like plugin/example.go. This MUST be in the package main, and define a variable of name AnalyzerPlugin. The AnalyzerPlugin instance MUST implement the following interface:

type AnalyzerPlugin interface {
    GetAnalyzers() []*analysis.Analyzer
}

The type of AnalyzerPlugin is not important, but is by convention type analyzerPlugin struct {}. See plugin/example.go for more info.

To build the plugin, from the root project directory, run go build -buildmode=plugin plugin/example.go. This will create a plugin *.so file that can be copied into your project or another well known location for usage in golangci-lint.

False Positives

False positives are inevitable, but we did our best to reduce their count. For example, we have a default enabled set of exclude patterns. If a false positive occurred you have the following choices:

Exclude issue by text using command-line option -e or config option issues.exclude. It's helpful when you decided to ignore all issues of this type. Also, you can use issues.exclude-rules config option for per-path or per-linter configuration.
Exclude this one issue by using special comment //nolint (see the section below).
Exclude issues in path by run.skip-dirs, run.skip-files or issues.exclude-rules config options.

Please create GitHub Issues here if you find any false positives. We will add it to the default exclude list if it's common or we will fix underlying linter.

Nolint

To exclude issues from all linters use //nolint. For example, if it's used inline (not from the beginning of the line) it excludes issues only for this line.

var bad_name int //nolint

To exclude issues from specific linters only:

var bad_name int //nolint:golint,unused

To exclude issues for the block of code use this directive on the beginning of a line:

//nolint
func allIssuesInThisFunctionAreExcluded() *string {
  // ...
}

//nolint:govet
var (
  a int
  b int
)

Also, you can exclude all issues in a file by:

//nolint:unparam
package pkg

You may add a comment explaining or justifying why //nolint is being used on the same line as the flag itself:

//nolint:gocyclo // This legacy function is complex but the team too busy to simplify it
func someLegacyFunction() *string {
  // ...
}

You can see more examples of using //nolint in our tests for it.

Use //nolint instead of // nolint because machine-readable comments should have no space by Go convention.

FAQ

How do you add a custom linter?

You can integrate it yourself, see this wiki page with documentation. Or you can create a GitHub Issue and we will integrate when time permits.

It's cool to use golangci-lint when starting a project, but what about existing projects with large codebase? It will take days to fix all found issues

We are sure that every project can easily integrate golangci-lint, even the large one. The idea is to not fix all existing issues. Fix only newly added issue: issues in new code. To do this setup CI (or better use GolangCI) to run golangci-lint with option --new-from-rev=HEAD~1. Also, take a look at option --new, but consider that CI scripts that generate unstaged files will make --new only point out issues in those files and not in the last commit. In that regard --new-from-rev=HEAD~1 is safer. By doing this you won't create new issues in your code and can choose fix existing issues (or not).

How to use golangci-lint in CI (Continuous Integration)?

You have 2 choices:

Use GolangCI: this service is highly integrated with GitHub (issues are commented in the pull request) and uses a golangci-lint tool. For configuration use .golangci.yml (or toml/json).
Use custom CI: just run golangci-lint in CI and check the exit code. If it's non-zero - fail the build. The main disadvantage is that you can't see issues in pull request code and would need to view the build log, then open the referenced source file to see the context.

We don't recommend vendoring golangci-lint in your repo: you will get troubles updating golangci-lint. Please, use recommended way to install with the shell script: it's very fast.

Do I need to run go install?

No, you don't need to do it anymore.

Which go versions are supported Short answer: go 1.12 and newer are officially supported.

Long answer:

go < 1.9 isn't supported
go1.9 is officially supported by golangci-lint <= v1.10.2
go1.10 is officially supported by golangci-lint <= 1.15.0.
go1.11 is officially supported by golangci-lint <= 1.17.1.
go1.12+ are officially supported by the latest version of golangci-lint (>= 1.18.0).

golangci-lint doesn't work

Please, ensure you are using the latest binary release.
Run it with -v option and check the output.
If it doesn't help create a GitHub issue with the output from the error and #2 above.

Why running with --fast is slow on the first run? Because the first run caches type information. All subsequent runs will be fast. Usually this options is used during development on local machine and compilation was already performed.

Thanks

Thanks to all contributors! Thanks to alecthomas/gometalinter for inspiration and amazing work. Thanks to bradleyfalzon/revgrep for cool diff tool.

Thanks to developers and authors of used linters:

Changelog

Follow the news and releases on our twitter and our blog. There is the most valuable changes log:

May 2020

Add new linters: nolintlint, goerr113
Updated linters: godot

April 2020

Add new linters: testpackage, nestif, godot, gomodguard, asciicheck
Add github actions output format
Update linters: wsl, gomodguard, gosec
Support disabled-tags setting for gocritic
Mitigate OOM and "failed prerequisites"
Self-isolate due to unexpected pandemics
Support case-sensitive excludes
Allow granular re-enabling excludes by ID, e.g. EXC0002

September 2019

Support go1.13
Add new linters: funlen, whitespace (with auto-fix) and godox
Update linters: gochecknoglobals, scopelint, gosec
Provide pre-built binary for ARM and FreeBSD
1. Fix false-positives in unused
Support --skip-dirs-use-default
Add support for bash completions

July 2019

Fix parallel writes race condition
Update bodyclose with fixed panic

June 2019

Treat Go source files as a plain text by misspell: it allows detecting issues in strings, variable names, etc.
Implement richer and more stable auto-fix of misspell issues.

May 2019

Add bodyclose linter.
Support junit-xml output.

April 2019

Update go-critic, new checkers were added: badCall, dupImports, evalOrder, newDeref
Fix staticcheck panic on packages that do not compile
Make install script work on Windows
Fix compatibility with the latest x/tools version and update golang.org/x/tools
Correct import path of module sourcegraph/go-diff
Fix max-issues-per-linter name
Fix linting of preprocessed files (e.g. *.qtpl.go, goyacc)
Enable auto-fixing when running via pre-commit

March 2019

Support the newest go vet (with go/analysis)
Support configuration of go vet: e.g. you can set print functions by linters-settings.govet.settings.printf.funcs
Update megacheck (staticcheck) to 2019.1.1
Add information about controlling space-time trade-off into README
Exclude issues by source code line regexp by issues.exclude-rules[i].source
Build and test on go 1.12
Support --color option
Update x/tools to fix c++ issues
Include support for log level
Sort linters list in help commands

Debug

You can see a verbose output of linter by using -v option.

If you would like to see more detailed logs you can set environment variable GL_DEBUG to debug golangci-lint. It's value is a list of debug tags. For example, GL_DEBUG=loader,gocritic golangci-lint run. Existing debug tags:

gocritic - debug go-critic linter;
env - debug go env command;
loader - debug packages loading (including go/packages internal debugging);
autogen_exclude - debug a filter excluding autogenerated source code;
nolint - debug a filter excluding issues by //nolint comments.

Future Plans

Upstream all changes of forked linters.
Make it easy to write own linter/checker: it should take a minimum code, have perfect documentation, debugging and testing tooling.
Speed up SSA loading: on-disk cache and existing code profiling-optimizing.
Analyze (don't only filter) only new code: analyze only changed files and dependencies, make incremental analysis, caches.
Smart new issues detector: don't print existing issues on changed lines.
Minimize false-positives by fixing linters and improving testing tooling.
Automatic issues fixing (code rewrite, refactoring) where it's possible.
Documentation for every issue type.

Contact Information

Slack channel: #golangci-lint.

You can contact the author of GolangCI-Lint by [email protected]. Follow the news and releases on our twitter and our blog.

Name		Name	Last commit message	Last commit date
Latest commit History 767 Commits
.github		.github
build		build
cmd/golangci-lint		cmd/golangci-lint
docs		docs
internal		internal
pkg		pkg
scripts		scripts
test		test
third_party		third_party
tools		tools
.gitignore		.gitignore
.golangci.example.yml		.golangci.example.yml
.golangci.yml		.golangci.yml
.goreleaser.yml		.goreleaser.yml
.markdownlint.yaml		.markdownlint.yaml
.pre-commit-hooks.yaml		.pre-commit-hooks.yaml
.travis.yml		.travis.yml
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
README.tmpl.md		README.tmpl.md
go.mod		go.mod
go.sum		go.sum
install.sh		install.sh

License

anshuman-mor/golangci-lint

Folders and files

Latest commit

History

Repository files navigation

GolangCI-Lint

Demo

Install

Binary

macOS

Docker

Go

Trusted By

Quick Start

Editor Integration

Shell Completion

macOS

Linux

Comparison

golangci-lint vs gometalinter

golangci-lint vs Running Linters Manually

Performance

Comparison with gometalinter

Why golangci-lint is faster

Memory Usage of Golangci-lint

Internals

Supported Linters

Enabled By Default Linters

Disabled By Default Linters (-E/--enable)

Configuration

Command-Line Options

Config File

Custom Linters

Create a Copy of golangci-lint that Can Run with Plugins

Configure Your Project for Linting

To Create Your Own Custom Linter

False Positives

Nolint

FAQ

Thanks

Changelog

May 2020

April 2020

September 2019

July 2019

June 2019

May 2019

April 2019

March 2019

Debug

Future Plans

Contact Information

License Scan

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

`golangci-lint` vs `gometalinter`

`golangci-lint` vs Running Linters Manually

Disabled By Default Linters (`-E/--enable`)

Create a Copy of `golangci-lint` that Can Run with Plugins

Packages