s-ui.sh

#!/bin/bash

red='\033[0;31m'
green='\033[0;32m'
yellow='\033[0;33m'
plain='\033[0m'

#Add some basic function here
function LOGD() {
    echo -e "${yellow}[DEG] $* ${plain}"
}

function LOGE() {
    echo -e "${red}[ERR] $* ${plain}"
}

function LOGI() {
    echo -e "${green}[INF] $* ${plain}"
}
# check root
[[ $EUID -ne 0 ]] && LOGE "ERROR: You must be root to run this script! \n" && exit 1

# Check OS and set release variable
if [[ -f /etc/os-release ]]; then
    source /etc/os-release
    release=$ID
elif [[ -f /usr/lib/os-release ]]; then
    source /usr/lib/os-release
    release=$ID
else
    echo "Failed to check the system OS, please contact the author!" >&2
    exit 1
fi

echo "The OS release is: $release"


os_version=""
os_version=$(grep -i version_id /etc/os-release | cut -d \" -f2 | cut -d . -f1)

if [[ "${release}" == "arch" ]]; then
    echo "Your OS is Arch Linux"
elif [[ "${release}" == "parch" ]]; then
    echo "Your OS is Parch linux"
elif [[ "${release}" == "manjaro" ]]; then
    echo "Your OS is Manjaro"
elif [[ "${release}" == "armbian" ]]; then
    echo "Your OS is Armbian"
elif [[ "${release}" == "opensuse-tumbleweed" ]]; then
    echo "Your OS is OpenSUSE Tumbleweed"
elif [[ "${release}" == "centos" ]]; then
    if [[ ${os_version} -lt 8 ]]; then
        echo -e "${red} Please use CentOS 8 or higher ${plain}\n" && exit 1
    fi
elif [[ "${release}" == "ubuntu" ]]; then
    if [[ ${os_version} -lt 20 ]]; then
        echo -e "${red} Please use Ubuntu 20 or higher version!${plain}\n" && exit 1
    fi
elif [[ "${release}" == "fedora" ]]; then
    if [[ ${os_version} -lt 36 ]]; then
        echo -e "${red} Please use Fedora 36 or higher version!${plain}\n" && exit 1
    fi
elif [[ "${release}" == "debian" ]]; then
    if [[ ${os_version} -lt 11 ]]; then
        echo -e "${red} Please use Debian 11 or higher ${plain}\n" && exit 1
    fi
elif [[ "${release}" == "almalinux" ]]; then
    if [[ ${os_version} -lt 9 ]]; then
        echo -e "${red} Please use AlmaLinux 9 or higher ${plain}\n" && exit 1
    fi
elif [[ "${release}" == "rocky" ]]; then
    if [[ ${os_version} -lt 9 ]]; then
        echo -e "${red} Please use Rocky Linux 9 or higher ${plain}\n" && exit 1
    fi
elif [[ "${release}" == "oracle" ]]; then
    if [[ ${os_version} -lt 8 ]]; then
        echo -e "${red} Please use Oracle Linux 8 or higher ${plain}\n" && exit 1
    fi
else
    echo -e "${red}Your operating system is not supported by this script.${plain}\n"
    echo "Please ensure you are using one of the following supported operating systems:"
    echo "- Ubuntu 20.04+"
    echo "- Debian 11+"
    echo "- CentOS 8+"
    echo "- Fedora 36+"
    echo "- Arch Linux"
    echo "- Parch Linux"
    echo "- Manjaro"
    echo "- Armbian"
    echo "- AlmaLinux 9+"
    echo "- Rocky Linux 9+"
    echo "- Oracle Linux 8+"
    echo "- OpenSUSE Tumbleweed"
    exit 1

fi

confirm() {
    if [[ $# > 1 ]]; then
        echo && read -p "$1 [Default$2]: " temp
        if [[ x"${temp}" == x"" ]]; then
            temp=$2
        fi
    else
        read -p "$1 [y/n]: " temp
    fi
    if [[ x"${temp}" == x"y" || x"${temp}" == x"Y" ]]; then
        return 0
    else
        return 1
    fi
}

confirm_restart() {
    confirm "Restart the ${1} service" "y"
    if [[ $? == 0 ]]; then
        restart
    else
        show_menu
    fi
}

before_show_menu() {
    echo && echo -n -e "${yellow}Press enter to return to the main menu: ${plain}" && read temp
    show_menu
}

install() {
    bash <(curl -Ls https://raw.githubusercontent.com/alireza0/s-ui/main/install.sh)
    if [[ $? == 0 ]]; then
        if [[ $# == 0 ]]; then
            start
        else
            start 0
        fi
    fi
}

update() {
    confirm "This function will forcefully reinstall the latest version, and the data will not be lost. Do you want to continue?" "n"
    if [[ $? != 0 ]]; then
        LOGE "Cancelled"
        if [[ $# == 0 ]]; then
            before_show_menu
        fi
        return 0
    fi
    bash <(curl -Ls https://raw.githubusercontent.com/alireza0/s-ui/main/install.sh)
    if [[ $? == 0 ]]; then
        LOGI "Update is complete, Panel has automatically restarted "
        exit 0
    fi
}

custom_version() {
    echo "Enter the panel version (like 0.0.1):"
    read panel_version

    if [ -z "$panel_version" ]; then
        echo "Panel version cannot be empty. Exiting."
    exit 1
    fi

    download_link="https://raw.githubusercontent.com/alireza0/s-ui/master/install.sh"

    # Use the entered panel version in the download link
    install_command="bash <(curl -Ls $download_link) $panel_version"

    echo "Downloading and installing panel version $panel_version..."
    eval $install_command
}

uninstall() {
    confirm "Are you sure you want to uninstall the panel?" "n"
    if [[ $? != 0 ]]; then
        if [[ $# == 0 ]]; then
            show_menu
        fi
        return 0
    fi
    systemctl stop s-ui
    systemctl disable s-ui
    rm /etc/systemd/system/s-ui.service -f
    systemctl daemon-reload
    systemctl reset-failed
    rm /etc/s-ui/ -rf
    rm /usr/local/s-ui/ -rf

    echo ""
    echo -e "Uninstalled Successfully, If you want to remove this script, then after exiting the script run ${green}rm /usr/local/s-ui -f${plain} to delete it."
    echo ""

    if [[ $# == 0 ]]; then
        before_show_menu
    fi
}

reset_admin() {
    echo "It is not recommended to set admin's credentials to default!"
    confirm "Are you sure you want to reset admin's credentials to default ?" "n"
    if [[ $? == 0 ]]; then
        /usr/local/s-ui/sui admin -reset
    fi
    before_show_menu
}

set_admin() {
    echo "It is not recommended to set admin's credentials to a complex text."
    read -p "Please set up your username:" config_account
    read -p "Please set up your password:" config_password
    /usr/local/s-ui/sui admin -username ${config_account} -password ${config_password}
    before_show_menu
}

view_admin() {
    /usr/local/s-ui/sui admin -show
    before_show_menu
}

reset_setting() {
    confirm "Are you sure you want to reset settings to default ?" "n"
    if [[ $? == 0 ]]; then
        /usr/local/s-ui/sui setting -reset
    fi
    before_show_menu
}

set_setting() {
    echo -e "Enter the ${yellow}panel port${plain} (leave blank for existing/default value):"
    read config_port
    echo -e "Enter the ${yellow}panel path${plain} (leave blank for existing/default value):"
    read config_path

    # Sub configuration
    echo -e "Enter the ${yellow}subscription port${plain} (leave blank for existing/default value):"
    read config_subPort
    echo -e "Enter the ${yellow}subscription path${plain} (leave blank for existing/default value):" 
    read config_subPath

    # Set configs
    echo -e "${yellow}Initializing, please wait...${plain}"
    params=""
    [ -z "$config_port" ] || params="$params -port $config_port"
    [ -z "$config_path" ] || params="$params -path $config_path"
    [ -z "$config_subPort" ] || params="$params -subPort $config_subPort"
    [ -z "$config_subPath" ] || params="$params -subPath $config_subPath"
    /usr/local/s-ui/sui setting ${params}
    before_show_menu
}

view_setting() {
    /usr/local/s-ui/sui setting -show
    view_uri
    before_show_menu
}

view_uri() {
    info=$(/usr/local/s-ui/sui uri)
    if [[ $? != 0 ]]; then
        LOGE "Get current uri error"
        before_show_menu
    fi
    LOGI "You may access the Panel with following URL(s):"
    echo -e "${green}${info}${plain}"
}

start() {
    check_status $1
    if [[ $? == 0 ]]; then
        echo ""
        LOGI -e "${1} is running, No need to start again, If you need to restart, please select restart"
    else
        systemctl start $1
        sleep 2
        check_status $1
        if [[ $? == 0 ]]; then
            LOGI "${1} Started Successfully"
        else
            LOGE "Failed to start ${1}, Probably because it takes longer than two seconds to start, Please check the log information later"
        fi
    fi

    if [[ $# == 1 ]]; then
        before_show_menu
    fi
}

stop() {
    check_status $1
    if [[ $? == 1 ]]; then
        echo ""
        LOGI "${1} stopped, No need to stop again!"
    else
        systemctl stop $1
        sleep 2
        check_status
        if [[ $? == 1 ]]; then
            LOGI "${1} stopped successfully"
        else
            LOGE "Failed to stop ${1}, Probably because the stop time exceeds two seconds, Please check the log information later"
        fi
    fi

    if [[ $# == 1 ]]; then
        before_show_menu
    fi
}

restart() {
    systemctl restart $1
    sleep 2
    check_status $1
    if [[ $? == 0 ]]; then
        LOGI "${1} Restarted successfully"
    else
        LOGE "Failed to restart ${1}, Probably because it takes longer than two seconds to start, Please check the log information later"
    fi
    if [[ $# == 1 ]]; then
        before_show_menu
    fi
}

status() {
    systemctl status s-ui -l
    if [[ $# == 0 ]]; then
        before_show_menu
    fi
}

enable() {
    systemctl enable $1
    if [[ $? == 0 ]]; then
        LOGI "Set ${1} to boot automatically on startup successfully"
    else
        LOGE "Failed to set ${1} Autostart"
    fi

    if [[ $# == 1 ]]; then
        before_show_menu
    fi
}

disable() {
    systemctl disable $1
    if [[ $? == 0 ]]; then
        LOGI "Autostart ${1} Cancelled successfully"
    else
        LOGE "Failed to cancel ${1} autostart"
    fi

    if [[ $# == 1 ]]; then
        before_show_menu
    fi
}

show_log() {
    journalctl -u $1.service -e --no-pager -f
    if [[ $# == 1 ]]; then
        before_show_menu
    fi
}

update_shell() {
    wget -O /usr/bin/s-ui -N --no-check-certificate https://github.com/alireza0/s-ui/raw/main/s-ui.sh
    if [[ $? != 0 ]]; then
        echo ""
        LOGE "Failed to download script, Please check whether the machine can connect Github"
        before_show_menu
    else
        chmod +x /usr/bin/s-ui
        LOGI "Upgrade script succeeded, Please rerun the script" && exit 0
    fi
}

# 0: running, 1: not running, 2: not installed
check_status() {
    if [[ ! -f "/etc/systemd/system/$1.service" ]]; then
        return 2
    fi
    temp=$(systemctl status "$1" | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1)
    if [[ x"${temp}" == x"running" ]]; then
        return 0
    else
        return 1
    fi
}

check_enabled() {
    temp=$(systemctl is-enabled $1)
    if [[ x"${temp}" == x"enabled" ]]; then
        return 0
    else
        return 1
    fi
}

check_uninstall() {
    check_status s-ui
    if [[ $? != 2 ]]; then
        echo ""
        LOGE "Panel is already installed, Please do not reinstall"
        if [[ $# == 0 ]]; then
            before_show_menu
        fi
        return 1
    else
        return 0
    fi
}

check_install() {
    check_status s-ui
    if [[ $? == 2 ]]; then
        echo ""
        LOGE "Please install the panel first"
        if [[ $# == 0 ]]; then
            before_show_menu
        fi
        return 1
    else
        return 0
    fi
}

show_status() {
    check_status $1
    case $? in
    0)
        echo -e "${1} state: ${green}Running${plain}"
        show_enable_status $1
        ;;
    1)
        echo -e "${1} state: ${yellow}Not Running${plain}"
        show_enable_status $1
        ;;
    2)
        echo -e "${1} state: ${red}Not Installed${plain}"
        ;;
    esac
}

show_enable_status() {
    check_enabled $1
    if [[ $? == 0 ]]; then
        echo -e "Start ${1} automatically: ${green}Yes${plain}"
    else
        echo -e "Start ${1} automatically: ${red}No${plain}"
    fi
}

check_s-ui_status() {
    count=$(ps -ef | grep "sui" | grep -v "grep" | wc -l)
    if [[ count -ne 0 ]]; then
        return 0
    else
        return 1
    fi
}

show_s-ui_status() {
    check_s-ui_status
    if [[ $? == 0 ]]; then
        echo -e "s-ui state: ${green}Running${plain}"
    else
        echo -e "s-ui state: ${red}Not Running${plain}"
    fi
}

bbr_menu() {
    echo -e "${green}\t1.${plain} Enable BBR"
    echo -e "${green}\t2.${plain} Disable BBR"
    echo -e "${green}\t0.${plain} Back to Main Menu"
    read -p "Choose an option: " choice
    case "$choice" in
    0)
        show_menu
        ;;
    1)
        enable_bbr
        ;;
    2)
        disable_bbr
        ;;
    *) echo "Invalid choice" ;;
    esac
}

disable_bbr() {

    if ! grep -q "net.core.default_qdisc=fq" /etc/sysctl.conf || ! grep -q "net.ipv4.tcp_congestion_control=bbr" /etc/sysctl.conf; then
        echo -e "${yellow}BBR is not currently enabled.${plain}"
        exit 0
    fi

    # Replace BBR with CUBIC configurations
    sed -i 's/net.core.default_qdisc=fq/net.core.default_qdisc=pfifo_fast/' /etc/sysctl.conf
    sed -i 's/net.ipv4.tcp_congestion_control=bbr/net.ipv4.tcp_congestion_control=cubic/' /etc/sysctl.conf

    # Apply changes
    sysctl -p

    # Verify that BBR is replaced with CUBIC
    if [[ $(sysctl net.ipv4.tcp_congestion_control | awk '{print $3}') == "cubic" ]]; then
        echo -e "${green}BBR has been replaced with CUBIC successfully.${plain}"
    else
        echo -e "${red}Failed to replace BBR with CUBIC. Please check your system configuration.${plain}"
    fi
}

enable_bbr() {
    if grep -q "net.core.default_qdisc=fq" /etc/sysctl.conf && grep -q "net.ipv4.tcp_congestion_control=bbr" /etc/sysctl.conf; then
        echo -e "${green}BBR is already enabled!${plain}"
        exit 0
    fi

    # Check the OS and install necessary packages
    case "${release}" in
    ubuntu | debian | armbian)
        apt-get update && apt-get install -yqq --no-install-recommends ca-certificates
        ;;
    centos | almalinux | rocky | oracle)
        yum -y update && yum -y install ca-certificates
        ;;
    fedora)
        dnf -y update && dnf -y install ca-certificates
        ;;
    arch | manjaro | parch)
        pacman -Sy --noconfirm ca-certificates
        ;;
    *)
        echo -e "${red}Unsupported operating system. Please check the script and install the necessary packages manually.${plain}\n"
        exit 1
        ;;
    esac

    # Enable BBR
    echo "net.core.default_qdisc=fq" | tee -a /etc/sysctl.conf
    echo "net.ipv4.tcp_congestion_control=bbr" | tee -a /etc/sysctl.conf

    # Apply changes
    sysctl -p

    # Verify that BBR is enabled
    if [[ $(sysctl net.ipv4.tcp_congestion_control | awk '{print $3}') == "bbr" ]]; then
        echo -e "${green}BBR has been enabled successfully.${plain}"
    else
        echo -e "${red}Failed to enable BBR. Please check your system configuration.${plain}"
    fi
}

install_acme() {
    cd ~
    LOGI "install acme..."
    curl https://get.acme.sh | sh
    if [ $? -ne 0 ]; then
        LOGE "install acme failed"
        return 1
    else
        LOGI "install acme succeed"
    fi
    return 0
}

ssl_cert_issue_main() {
    echo -e "${green}\t1.${plain} Get SSL"
    echo -e "${green}\t2.${plain} Revoke"
    echo -e "${green}\t3.${plain} Force Renew"
    read -p "Choose an option: " choice
    case "$choice" in
        1) ssl_cert_issue ;;
        2) 
            local domain=""
            read -p "Please enter your domain name to revoke the certificate: " domain
            ~/.acme.sh/acme.sh --revoke -d ${domain}
            LOGI "Certificate revoked"
            ;;
        3)
            local domain=""
            read -p "Please enter your domain name to forcefully renew an SSL certificate: " domain
            ~/.acme.sh/acme.sh --renew -d ${domain} --force ;;
        *) echo "Invalid choice" ;;
    esac
}

ssl_cert_issue() {
    # check for acme.sh first
    if ! command -v ~/.acme.sh/acme.sh &>/dev/null; then
        echo "acme.sh could not be found. we will install it"
        install_acme
        if [ $? -ne 0 ]; then
            LOGE "install acme failed, please check logs"
            exit 1
        fi
    fi
    # install socat second
    case "${release}" in
    ubuntu | debian | armbian)
        apt update && apt install socat -y
        ;;
    centos | almalinux | rocky | oracle)
        yum -y update && yum -y install socat
        ;;
    fedora)
        dnf -y update && dnf -y install socat
        ;;
    arch | manjaro | parch)
        pacman -Sy --noconfirm socat
        ;;
    *)
        echo -e "${red}Unsupported operating system. Please check the script and install the necessary packages manually.${plain}\n"
        exit 1
        ;;
    esac
    if [ $? -ne 0 ]; then
        LOGE "install socat failed, please check logs"
        exit 1
    else
        LOGI "install socat succeed..."
    fi

    # get the domain here,and we need verify it
    local domain=""
    read -p "Please enter your domain name:" domain
    LOGD "your domain is:${domain},check it..."
    # here we need to judge whether there exists cert already
    local currentCert=$(~/.acme.sh/acme.sh --list | tail -1 | awk '{print $1}')

    if [ ${currentCert} == ${domain} ]; then
        local certInfo=$(~/.acme.sh/acme.sh --list)
        LOGE "system already has certs here,can not issue again,current certs details:"
        LOGI "$certInfo"
        exit 1
    else
        LOGI "your domain is ready for issuing cert now..."
    fi

    # create a directory for install cert
    certPath="/root/cert/${domain}"
    if [ ! -d "$certPath" ]; then
        mkdir -p "$certPath"
    else
        rm -rf "$certPath"
        mkdir -p "$certPath"
    fi

    # get needed port here
    local WebPort=80
    read -p "please choose which port do you use,default will be 80 port:" WebPort
    if [[ ${WebPort} -gt 65535 || ${WebPort} -lt 1 ]]; then
        LOGE "your input ${WebPort} is invalid,will use default port"
    fi
    LOGI "will use port:${WebPort} to issue certs,please make sure this port is open..."
    # NOTE:This should be handled by user
    # open the port and kill the occupied progress
    ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt
    ~/.acme.sh/acme.sh --issue -d ${domain} --standalone --httpport ${WebPort}
    if [ $? -ne 0 ]; then
        LOGE "issue certs failed,please check logs"
        rm -rf ~/.acme.sh/${domain}
        exit 1
    else
        LOGE "issue certs succeed,installing certs..."
    fi
    # install cert
    ~/.acme.sh/acme.sh --installcert -d ${domain} \
        --key-file /root/cert/${domain}/privkey.pem \
        --fullchain-file /root/cert/${domain}/fullchain.pem

    if [ $? -ne 0 ]; then
        LOGE "install certs failed,exit"
        rm -rf ~/.acme.sh/${domain}
        exit 1
    else
        LOGI "install certs succeed,enable auto renew..."
    fi

    ~/.acme.sh/acme.sh --upgrade --auto-upgrade
    if [ $? -ne 0 ]; then
        LOGE "auto renew failed, certs details:"
        ls -lah cert/*
        chmod 755 $certPath/*
        exit 1
    else
        LOGI "auto renew succeed, certs details:"
        ls -lah cert/*
        chmod 755 $certPath/*
    fi
}

ssl_cert_issue_CF() {
    echo -E ""
    LOGD "******Instructions for use******"
    LOGI "This Acme script requires the following data:"
    LOGI "1.Cloudflare Registered e-mail"
    LOGI "2.Cloudflare Global API Key"
    LOGI "3.The domain name that has been resolved dns to the current server by Cloudflare"
    LOGI "4.The script applies for a certificate. The default installation path is /root/cert "
    confirm "Confirmed?[y/n]" "y"
    if [ $? -eq 0 ]; then
        # check for acme.sh first
        if ! command -v ~/.acme.sh/acme.sh &>/dev/null; then
            echo "acme.sh could not be found. we will install it"
            install_acme
            if [ $? -ne 0 ]; then
                LOGE "install acme failed, please check logs"
                exit 1
            fi
        fi
        CF_Domain=""
        CF_GlobalKey=""
        CF_AccountEmail=""
        certPath=/root/cert
        if [ ! -d "$certPath" ]; then
            mkdir $certPath
        else
            rm -rf $certPath
            mkdir $certPath
        fi
        LOGD "Please set a domain name:"
        read -p "Input your domain here:" CF_Domain
        LOGD "Your domain name is set to:${CF_Domain}"
        LOGD "Please set the API key:"
        read -p "Input your key here:" CF_GlobalKey
        LOGD "Your API key is:${CF_GlobalKey}"
        LOGD "Please set up registered email:"
        read -p "Input your email here:" CF_AccountEmail
        LOGD "Your registered email address is:${CF_AccountEmail}"
        ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt
        if [ $? -ne 0 ]; then
            LOGE "Default CA, Lets'Encrypt fail, script exiting..."
            exit 1
        fi
        export CF_Key="${CF_GlobalKey}"
        export CF_Email=${CF_AccountEmail}
        ~/.acme.sh/acme.sh --issue --dns dns_cf -d ${CF_Domain} -d *.${CF_Domain} --log
        if [ $? -ne 0 ]; then
            LOGE "Certificate issuance failed, script exiting..."
            exit 1
        else
            LOGI "Certificate issued Successfully, Installing..."
        fi
        ~/.acme.sh/acme.sh --installcert -d ${CF_Domain} -d *.${CF_Domain} --ca-file /root/cert/ca.cer \
        --cert-file /root/cert/${CF_Domain}.cer --key-file /root/cert/${CF_Domain}.key \
        --fullchain-file /root/cert/fullchain.cer
        if [ $? -ne 0 ]; then
            LOGE "Certificate installation failed, script exiting..."
            exit 1
        else
            LOGI "Certificate installed Successfully,Turning on automatic updates..."
        fi
        ~/.acme.sh/acme.sh --upgrade --auto-upgrade
        if [ $? -ne 0 ]; then
            LOGE "Auto update setup Failed, script exiting..."
            ls -lah cert
            chmod 755 $certPath
            exit 1
        else
            LOGI "The certificate is installed and auto-renewal is turned on, Specific information is as follows"
            ls -lah cert
            chmod 755 $certPath
        fi
    else
        show_menu
    fi
}

show_usage() {
    echo -e "S-UI Control Menu Usage"
    echo -e "------------------------------------------"
    echo -e "SUBCOMMANDS:" 
    echo -e "s-ui              - Admin Management Script"
    echo -e "s-ui start        - Start s-ui"
    echo -e "s-ui stop         - Stop s-ui"
    echo -e "s-ui restart      - Restart s-ui"
    echo -e "s-ui status       - Current Status of s-ui"
    echo -e "s-ui enable       - Enable Autostart on OS Startup"
    echo -e "s-ui disable      - Disable Autostart on OS Startup"
    echo -e "s-ui log          - Check s-ui Logs"
    echo -e "s-ui update       - Update"
    echo -e "s-ui install      - Install"
    echo -e "s-ui uninstall    - Uninstall"
    echo -e "s-ui help         - Control Menu Usage"
    echo -e "------------------------------------------"
}

show_menu() {
  echo -e "
  ${green}S-UI Admin Management Script ${plain}
————————————————————————————————
  ${green}0.${plain} Exit
————————————————————————————————
  ${green}1.${plain} Install
  ${green}2.${plain} Update
  ${green}3.${plain} Custom Version
  ${green}4.${plain} Uninstall
————————————————————————————————
  ${green}5.${plain} Reset admin credentials to default
  ${green}6.${plain} Set admin credentials
  ${green}7.${plain} View admin credentials
————————————————————————————————
  ${green}8.${plain} Reset Panel Settings
  ${green}9.${plain} Set Panel settings
  ${green}10.${plain} View Panel Settings
————————————————————————————————
  ${green}11.${plain} S-UI Start
  ${green}12.${plain} S-UI Stop
  ${green}13.${plain} S-UI Restart
  ${green}14.${plain} S-UI Check State
  ${green}15.${plain} S-UI Check Logs
  ${green}16.${plain} S-UI Enable Autostart
  ${green}17.${plain} S-UI Disable Autostart
————————————————————————————————
  ${green}18.${plain} Enable or Disable BBR
  ${green}19.${plain} SSL Certificate Management
  ${green}20.${plain} Cloudflare SSL Certificate
————————————————————————————————
 "
    show_status s-ui
    echo && read -p "Please enter your selection [0-20]: " num

    case "${num}" in
    0)
        exit 0
        ;;
    1)
        check_uninstall && install
        ;;
    2)
        check_install && update
        ;;
    3)
        check_install && custom_version
        ;;
    4)
        check_install && uninstall
        ;;
    5)
        check_install && reset_admin
        ;;
    6)
        check_install && set_admin
        ;;
    7)
        check_install && view_admin
        ;;
    8)
        check_install && reset_setting
        ;;
    9)
        check_install && set_setting
        ;;
    10)
        check_install && view_setting
        ;;
    11)
        check_install && start s-ui
        ;;
    12)
        check_install && stop s-ui
        ;;
    13)
        check_install && restart s-ui
        ;;
    14)
        check_install && status s-ui
        ;;
    15)
        check_install && show_log s-ui
        ;;
    16)
        check_install && enable s-ui
        ;;
    17)
        check_install && disable s-ui
        ;;
    18)
        bbr_menu
        ;;
    19)
        ssl_cert_issue_main
        ;;
    20)
        ssl_cert_issue_CF
        ;;
    *)
        LOGE "Please enter the correct number [0-20]"
        ;;
    esac
}

if [[ $# > 0 ]]; then
    case $1 in
    "start")
        check_install 0 && start s-ui 0
        ;;
    "stop")
        check_install 0 && stop s-ui 0
        ;;
    "restart")
        check_install 0 && restart s-ui 0
        ;;
    "status")
        check_install 0 && status 0
        ;;
    "enable")
        check_install 0 && enable s-ui 0
        ;;
    "disable")
        check_install 0 && disable s-ui 0
        ;;
    "log")
        check_install 0 && show_log s-ui 0
        ;;
    "update")
        check_install 0 && update 0
        ;;
    "install")
        check_uninstall 0 && install 0
        ;;
    "uninstall")
        check_install 0 && uninstall 0
        ;;
    *) show_usage ;;
    esac
else
    show_menu
fi