CircuitPython 9.1.0-beta.0

This is CircuitPython 9.1.0-beta.0, a beta for CircuitPython 9.1.0, and is a new unstable release. This release has known bugs that will be addressed before 9.1.0 final.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

Notable changes since 9.0.0

Audio

• RP2040 I2SOut supports BLCK and LRCLK in either order.

Built-in modules

• Enhance collections.deque functionality.
• Add keypad_demux.DemuxKeyMatrix: use multiplexer for one side of a keypad matrix.
• Add integration-based debouncing to keypad.

Internal

• Espressif: update to ESP-IDF v5.2.1.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0

Fixes and enhancements

• Turn off displayio warnings noting name changes since 8.x.x. #9100, #9096. Thanks @dhalbert.
• Fix bitbangio.SPI idle polarity for polarity=1. #9075. Thanks @kbsriram.
• Enhance collections.deque functionality. #9065. Thanks @SAK917.
• Add keypad_demux.DemuxKeyMatrix: use multiplexer for one side of a keypad matrix. #9035. Thanks @CDarius.
• Add integration-based debouncing to keypad. #8855. Thanks @xs5871.

Port and board-specific changes

Broadcom

Espressif

• Update ESP-IDF to v5.2.1. #9071. Thanks @tannewt.

i.MX

nRF

RP2040

• Implement Socket.setsockopt(SOL_SOCKET, SO_REUSEADDR) for Pico W. #9100, #9084. Thanks @jepler.
• I2SOut: support BLCK and LRCLK in either order. #9097. Thanks @Fabien-Chouteau (@wee-noise-makers).

SAMx

SiLabs

Spresense

STM

Individual boards

• Adafruit ItsyBitsy ESP32: fix board.NEOPIXEL and board.NEOPIXEL_POWER pin assignments. #9100, #9087. Thanks @RetiredWizard.
• Adafruit Trinkey SHT4x: fix board.I2C() pins. #9108, #9107. Thanks @dhalbert and @BlitzCityDIY.

Documentation changes

• Update busdisplay.BusDisplay example. #9100, #9070. Thanks @FoamyGuy.

Build and infrastructure changes

• Do not include PICODVI-related sources if CIRCUITPY_PICODVI = 0. #9099. Thanks @bablokb.
• Fix compile error when CIRCUITPY_USB_HOST = 0. #9091. Thanks @bablokb.
• Update GitHub codespaces devcontainers. #9068. Thanks @bablokb.
• Rename ports/nrf to ports/nordic to avoid overlap with MicroPython. #9062. Thanks @dhalbert.

Translation additions and improvements

• Thanks for translations:
  • @wtuemura (Portuguese - Brazil)

New boards since 9.0.0

• M5Stack CoreS3. #9093. Thanks @CDarius.
• RF.Guru MicroPico. #9095. Thanks @ure (@Guru-RF).
• Sunton ESP32-2432S028. #9092. Thanks @SeanTheITGuy.
• Waveshare ESP32-S3 GEEK. #9076. Thanks @kylefmohr.

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 9.0.x
  • 9.1.0
  • 9.x.x
  • long term

Thanks

Thank you to all who used, tested, and contributed since 9.0.0, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 9.0.2

This is CircuitPython 9.0.2, the latest bugfix release of CircuitPython, and is a new stable release.

The only change to 9.0.2 from 9.0.1 is a fix for a pin error for the Adafruit SHT4x Trinkey board. You do not need to upgrade from 9.0.1 unless you are using this board.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

For notable changes to 9.0.0 since 8.x.x, see the 9.0.0 release notes.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0

Fixes and enhancements

Port and board-specific changes

Broadcom

Espressif

i.MX

nRF

RP2040

SAMx

SiLabs

Spresense

STM

Individual boards

• Adafruit Trinkey SHT4x: fix board.I2C() pins. #9107. Thanks @dhalbert and @BlitzCityDIY.

Documentation changes

Build and infrastructure changes

Translation additions and improvements

New boards since 9.0.0

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 9.0.x
  • 9.1.0
  • 9.x.x
  • long term

Thanks

Thank you to all who used, tested, and contributed since 9.0.1, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 9.0.1

This is CircuitPython 9.0.1, the latest bugfix release of CircuitPython, and is a new stable release.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

For notable changes to 9.0.0 since 8.x.x, see the 9.0.0 release notes.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0

Fixes and enhancements

• Turn off displayio warnings noting name changes since 8.x.x. #9096. Thanks @dhalbert.

Port and board-specific changes

Broadcom

Espressif

i.MX

nRF

RP2040

• Implement Socket.setsockopt(SOL_SOCKET, SO_REUSEADDR) for Pico W. #9084. Thanks @jepler.

SAMx

SiLabs

Spresense

STM

Individual boards

• Adafruit ItsyBitsy ESP32: fix board.NEOPIXEL and board.NEOPIXEL_POWER pin assignments. #9087. Thanks @RetiredWizard.

Documentation changes

• Update busdisplay.BusDisplay example. #9070. Thanks @FoamyGuy.

Build and infrastructure changes

Translation additions and improvements

New boards since 9.0.0

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 9.0.x
  • 9.1.0
  • 9.x.x
  • long term

Thanks

Thank you to all who used, tested, and contributed since 9.0.0, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 9.0.0

This is CircuitPython 9.0.0, the latest major revision of CircuitPython, and is a new stable release.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

Notable changes to 9.0.0 since 8.x.x

Incompatibility warnings

• New storage management. See Internal below about possible new memory errors with existing programs.
• Filesystems such as SD cards must now be mounted on an existing directory as a mount point. See Storage below.
• Incompatible change in socket behavior: Sockets must be explictly made reusable. See Networking below.
• displayio.*Display.show() has been removed. Use *Display.root_group = instead.
• I2CPeripheral is now I2CTarget.

Audio

• Add synthio.Note .loop_start and .loop_end properties.
• Add synthio.Synthesizer.note_state.
• Add I2S MCLK support on Espressif.
• Allow signed amplitude in synthio.

Built-in modules

• Add OrderedDict.move_to_end().
• Add warnings module, similar to what is in CPython.
• Add locale.getlocale().
• Add codeop.compile_command().
• Remove 8.x.x deprecations: displayio.*.show(), I2CPeripheral renamed to I2CTarget.

Graphics

• Reorganize and split displayio. 8.x.x naming structure is available in 9.x.x, but will be removed in 10.0.0.
  • displayio.Display is now busdisplay.BusDisplay.
  • displayio.FourWire is now fourwire.FourWire.
  • displayio.EPaperDisplay is now epaperdisplay.EPaperDisplay.
  • displayio.I2CDisplay is now i2cdisplaybus.I2CDisplayBus.
• Add jpegio JPEG decoder support.
• Add bitmapfilter image manipulation.

Internal

• New split-heap internal dynamic storage mechanism. Some CircuitPython programs may fail with MemoryError. If you encounter programs that work in 8.x.x but get MemoryError exceptions, consider filing an issue with details.
• Merge updates from MicroPython v1.19.1, v1.20.0, and v1.21.0.
• Espressif: update to ESP-IDF v5.1.3.

Networking

• Allow specifying protocol for raw sockets.
• Add mDNS TXT record support.
• Make SD cards available over web workflow.
• Allow fetching of associated stations in access-point mode.
• Incompatible change: Require explicit socket port reuse. Use socket.setsockopt(pool.SOL_SOCKET, pool.SO_REUSEADDR, 1), as in CPython.

Python interpreter

• Use terser error messages on small builds.

Storage

• CIRCUITPY drives now mount on Android.
• Increased file capacity on CIRCUITPY drives <= 128kB.
• Incompatible change: Require filesystem mounts to be on existing directories. Create /sd in fresh filesystems to provide a mount point.

Supervisor

• Add repl.py, which runs just before the REPL starts up.

USB

• Video device ("Webcam", UVC) support.
• HID can wake up sleeping host computer.
• Further USB host support, on i.MX and RP2040.
• Allow setting USB HID interface name.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0-rc.1

Fixes and enhancements

• Allow ctrl-C of adafruit_bus_device.spi_device.SPIDevice awaiting lock. #9055. Thanks @dhalbert.

Port and board-specific changes

Broadcom

Espressif

i.MX

nRF

RP2040

SAMx

SiLabs

Spresense

STM

Individual boards

• M5Stack Cardputer: fix board.I2S_DATA pin name typo. #9020. Thanks @RetiredWizard.

Documentation changes

Build and infrastructure changes

Translation additions and improvements

New boards since 9.0.0-rc.1

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 9.0.x
  • 9.x.x
  • long term

Thanks

Thank you to all who used, tested, and contributed since 9.0.0-rc.1, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 9.0.0 Release Candidate 1

This is CircuitPython 9.0.0-rc.1, a release candidate for 9.0.0 final. This release is believed to be stable, and is meant for testing before the final release of 9.0.0.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

Notable changes to 9.0.0 since 8.x.x

Incompatibility warnings

• New storage management. See Internal below about possible new memory errors with existing programs.
• Filesystems such as SD cards must now be mounted on an existing directory as a mount point. See Storage below.
• Incompatible change in socket behavior: Sockets must be explictly made reusable. See Networking below.
• displayio.*Display.show() has been removed. Use *Display.root_group = instead.
• I2CPeripheral is now I2CTarget.

Audio

• Add synthio.Note .loop_start and .loop_end properties.
• Add synthio.Synthesizer.note_state.
• Add I2S MCLK support on Espressif.
• Allow signed amplitude in synthio.

Built-in modules

• Add OrderedDict.move_to_end().
• Add warnings module, similar to what is in CPython.
• Add locale.getlocale().
• Add codeop.compile_command().
• Remove 8.x.x deprecations: displayio.*.show(), I2CPeripheral renamed to I2CTarget.

Graphics

• Reorganize and split displayio. 8.x.x naming structure is available in 9.x.x, but will be removed in 10.0.0.
• Add jpegio JPEG decoder support.
• Add bitmapfilter image manipulation.

Internal

• New split-heap internal dynamic storage mechanism. Some CircuitPython programs may fail with MemoryError. If you encounter programs that work in 8.x.x but get MemoryError exceptions, consider filing an issue with details.
• Merge updates from MicroPython v1.19.1, v1.20.0, and v1.21.0.
• Espressif: update to ESP-IDF v5.1.3.

Networking

• Allow specifying protocol for raw sockets.
• Add mDNS TXT record support.
• Make SD cards available over web workflow.
• Allow fetching of associated stations in access-point mode.
• Incompatible change: Require explicit socket port reuse. Use socket.setsockopt(pool.SOL_SOCKET, pool.SO_REUSEADDR, 1), as in CPython.

Python interpreter

• Use terser error messages on small builds.

Storage

• CIRCUITPY drives now mount on Android.
• Increased file capacity on CIRCUITPY drives <= 128kB.
• Incompatible change: Require filesystem mounts to be on existing directories. Create /sd in fresh filesystems to provide a mount point.

Supervisor

• Add repl.py, which runs just before the REPL starts up.

USB

• Video device ("Webcam", UVC) support.
• HID can wake up sleeping host computer.
• Further USB host support, on i.MX and RP2040.
• Allow setting USB HID interface name.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0-rc.0

Fixes and enhancements

• Update frozen libraries. #9046. Thanks @dhalbert.
• Fix tlsf allocation logic. #9039. Thanks @tannewt.

Port and board-specific changes

Broadcom

Espressif

• Fix RMT clock speed on ESP32-H2. #9051. Thanks @tannewt.
• Fix _bleio.Adapter name setting. #9041. Thanks @dhalbert.
• Fix tlsf allocation logic. #9039. Thanks @tannewt.
• Fix error reporting for certain connection errors. #8888. Thanks @bill88t.

i.MX

• Don't reset USB_HOST_POWER pin on Teensy boards that have it. #9048. Thanks @dhalbert

nRF

RP2040

• Handle multiple USB setup packets: TinyUSB fix. #9042. Thanks @hathach.
• Don't claim PWMOut pin before validation. #9024. Thanks @dhalbert.
• Update cyw43-driver to upstream version v1.0.3. #9022. Thanks @eightycc.

SAMx

SiLabs

Spresense

STM

Individual boards

• Adafruit MatrixPortal S3: disable espcamera properly. #9043. Thanks @jerryneedell and @dhalbert.

Documentation changes

• Fix supervisor.Runtime.serial_bytes_available documentation. #9032. Thanks @RetiredWizard.

Build and infrastructure changes

Translation additions and improvements

• Thanks for translations:
  • @Sokromatrix (German)
  • @wtuemura (Portuguese - Brazil)
  • @Xfox20 (German)

New boards since 9.0.0-rc.0

• Adafruit Feather ESP32-C6 4MB Flash No PSRAM. #9018. Thanks @dhalbert.
• Waveshare RP2040-Tiny. #8796. Thanks @bill88t.

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 9.0.0
  • 9.0.x
  • 9.x.x
  • long term

Thanks

Thank you to all who used, tested, and contributed since 9.0.0-rc.0, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 9.0.0 Release Candidate 0

This is CircuitPython 9.0.0-rc.0, a release candidate for 9.0.0 final. This release is believed to be stable, and is meant for testing before the final release of 9.0.0.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

Notable changes to 9.0.0 since 8.x.x

Incompatibility warnings

• New storage management. See Internal below about possible new memory errors with existing programs.
• Filesystems such as SD cards must now be mounted on an existing directory as a mount point. See Storage below.
• Incompatible change in socket behavior: Sockets must be explictly made reusable. See Networking below.
• displayio.*Display.show() has been removed. Use *Display.root_group = instead.
• I2CPeripheral is now I2CTarget.

Audio

• Add synthio.Note .loop_start and .loop_end properties.
• Add synthio.Synthesizer.note_state.
• Add I2S MCLK support on Espressif.
• Allow signed amplitude in synthio.

Built-in modules

• Add OrderedDict.move_to_end().
• Add warnings module, similar to what is in CPython.
• Add locale.getlocale().
• Add codeop.compile_command().
• Remove 8.x.x deprecations: displayio.*.show(), I2CPeripheral renamed to I2CTarget.

Graphics

• Reorganize and split displayio. 8.x.x naming structure is available in 9.x.x, but will be removed in 10.0.0.
• Add jpegio JPEG decoder support.
• Add bitmapfilter image manipulation.

Internal

• New split-heap internal dynamic storage mechanism. Some CircuitPython programs may fail with MemoryError. If you encounter programs that work in 8.x.x but get MemoryError exceptions, consider filing an issue with details.
• Merge updates from MicroPython v1.19.1, v1.20.0, and v1.21.0.
• Espressif: update to ESP-IDF v5.1.3.

Networking

• Allow specifying protocol for raw sockets.
• Add mDNS TXT record support.
• Make SD cards available over web workflow.
• Allow fetching of associated stations in access-point mode.
• Incompatible change: Require explicit socket port reuse. Use socket.setsockopt(pool.SOL_SOCKET, pool.SO_REUSEADDR, 1), as in CPython.

Python interpreter

• Use terser error messages on small builds.

Storage

• CIRCUITPY drives now mount on Android.
• Increased file capacity on CIRCUITPY drives <= 128kB.
• Incompatible change: Require filesystem mounts to be on existing directories. Create /sd in fresh filesystems to provide a mount point.

Supervisor

• Add repl.py, which runs just before the REPL starts up.

USB

• Video device ("Webcam", UVC) support.
• HID can wake up sleeping host computer.
• Further USB host support, on i.MX and RP2040.
• Allow setting USB HID interface name.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0-beta.2

Fixes and enhancements

• Update frozen libraries. #9019. Thanks @dhalbert.
• Fix corrupted BLE ScanEntry objects. #9014. Thanks @dhalbert.
• Setting the WatchdogTimer timeout will reset the watchdog interval. #9012. Thanks @tannewt.
• Improve RGBMatrix reliability. #9008. Thanks @tannewt.
• Fix ETIMEDOUT exceptions in ssl. #9006. Thanks @jepler.
• Postpone web workflow request if SPI bus is locked. #9005. Thanks @jepler.
• Fix USB Host HID. #8999. Thanks @hathach.
• Allow web workflow to write to CIRCUITPY when connected to USB. #8994. Thanks @tannewt.
• Disable warnings during REPL autocomplete. #8993. Thanks @tannewt.
• Allow setting USB HID interface name. #8989. Thanks @MariuszCwikla.
• Include language code in USB Host string descriptors. #8976. Thanks @tannewt.
• Use finalizer to properly clean up PWMOut objects, including those used by other objects. #8966. Thanks @tannewt.
• Freeze new adafruit_connection_manager library on appropriate boards. #8963. Thanks @justmobilize.
• Fix ssl.SSLSocket.bind() error checking. #8962. Thanks @tannewt.
• Allow fetching of associated stations in access-point mode. #8820. Thanks @romkey.

Port and board-specific changes

Broadcom

Espressif

• Update ESP-IDF to v5.1.3. #9008. Thanks @tannewt.
• Fix WatchdogTimer units. #9012. Thanks @tannewt.
• Use a finalizer to clean up espcamera objects. #8990. Thanks @dhalbert.

i.MX

nRF

RP2040

SAMx

SiLabs

Spresense

STM

Individual boards

• Adafruit QT Py M0 Haxpress: allow W25Q32FV flash chip. #9011. Thanks @guutz.
• M5Stack Atom S3: fix display colors. #8998. Thanks @jins-tkomoda.
• PewPew LCD: update board to v4.1. #8959. Thanks @deshipu.

Documentation changes

• Fix RTD build by specifying conf.py. #8992. Thanks @tannewt.

Build and infrastructure changes

• Update tlsf library to allow allocating just-freed region. #9004. Thanks @tannewt.
• Update tools/convert_release_notes.py to use mistune v3. #8955. Thanks @dhalbert.

Translation additions and improvements

• Thanks for translations:
  • @andibing (English - UK)
  • @wtuemura (Portuguese - Brazil)

New boards since 9.0.0-beta.2

• Adafruit ItsyBitsy ESP32. #8953. Thanks @BlitzCityDIY.
• Adafruit SHT4x Trinkey M0. #9007. Thanks @ladyada.
• M5Stack Cardputer. #8816. Thanks @jamesjnadeau and @FoamyGuy.
• senseBox MCU-S2 ESP32S2. #8997, #8965. Thanks @mariopesch.

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 9.0.0
  • 9.0.x
  • 9.x.x
  • long term

Thanks

Thank you to all who used, tested, and contributed since 9.0.0-beta.2, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 9.0.0 Beta 2

This is CircuitPython 9.0.0-beta.2, a beta release for 9.0.0, and is a new unstable release. This release has known bugs that will be addressed before 9.0.0 final.

Note for MEMENTO Camera Board users: This release contains an important fix for MEMENTO. If you originally installed a version of CircuitPython older than 9.0.0-beta.2 on your board, your CIRCUITPY drive thinks it is larger than it really is. This can cause crashes. To fix this, back up what is on your drive, install CircuitPython 9.0.0-beta.2 or later, and then erase and reformat CIRCUITPY by running this code from the terminal or in a program

import storage
storage.erase_filesystem()

Or, use the factory reset procedure described in the MEMENTO Learn Guide. But the simple code above will work just as well.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

Notable changes to 9.0.0 since 8.x.x

Incompatibility warnings

• New storage management. See Internal below about possible new memory errors with existing programs.
• Filesystems such as SD cards must now be mounted on an existing directory as a mount point. See Storage below.
• Incompatible change in socket behavior: Sockets must be explictly made reusable. See Networking below.

Audio

• Add synthio.Note .loop_start and .loop_end properties.
• Add synthio.Synthesizer.note_state.
• Add I2S MCLK support on Espressif.
• Allow signed amplitude in synthio.

Built-in modules

• Add OrderedDict.move_to_end().
• Add warnings module, similar to what is in CPython.
• Add locale.getlocale().
• Add codeop.compile_command().
• Remove 8.x.x deprecations: displayio.*.show(), I2CPeripheral renamed to I2CTarget.

Graphics

• Reorganize and split displayio. 8.x.x naming structure is available in 9.x.x, but will be removed in 10.0.0.
• Add jpegio JPEG decoder support.
• Add bitmapfilter image manipulation.

Internal

• New split-heap internal dynamic storage mechanism. Some CircuitPython programs may fail with MemoryError. If you encounter programs that work in 8.x.x but get MemoryError exceptions, consider filing an issue with details.
• Merge updates from MicroPython v1.19.1, v1.20.0, and v1.21.0.
• Espressif: update to ESP-IDF v5.1.2.

Networking

• Allow specifying protocol for raw sockets.
• Add mDNS TXT record support.
• Make SD cards available over web workflow.
• Incompatible change: Require explicit socket port reuse. Use socket.setsockopt(pool.SOL_SOCKET, pool.SO_REUSEADDR, 1), as in CPython.

Python interpreter

• Use terser error messages on small builds.

Storage

• CIRCUITPY drives now mount on Android.
• Increased file capacity on CIRCUITPY drives <= 128kB.
• Incompatible change: Require filesystem mounts to be on existing directories. Create /sd in fresh filesystems to provide a mount point.

Supervisor

• Add repl.py, which runs just before the REPL starts up.

USB

• Video device ("Webcam", UVC) support.
• HID can wake up sleeping host computer.
• Further USB host support, on i.MX and RP2040.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0-beta.1

Fixes and enhancements

Port and board-specific changes

Broadcom

Espressif

• Correct CIRCUITPY size on non-OTA boards, notably MEMENTO. #8952. Thanks @dhalbert and @jepler.

i.MX

nRF

RP2040

SAMx

SiLabs

Spresense

STM

Individual boards

• Adafruit MEMENTO: Fix CIRCUITPY size. Requires storage.erase_filesystem(). #8952. Thanks @dhalbert @jepler.
• Cytron Maker Uno RP2040: Change name; remove RGB status LED. #8950. Thanks @noqman.

Documentation changes

Build and infrastructure changes

• Add tests for bit_length(). Thanks @kbsriram.

Translation additions and improvements

• Thanks for translations:
  • @hexthat (Chinese - Pinyin)

New boards since 9.0.0-beta.1

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 9.0.0
  • long term

Thanks

Thank you to all who used, tested, and contributed since 9.0.0-beta.1, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 9.0.0 Beta 1

This is CircuitPython 9.0.0-beta.1, a beta release for 9.0.0, and is a new unstable release. This release has known bugs that will be addressed before 9.0.0 final.

NOTE: CircuitPython 9.0.0-alpha.4 and later use a new internal dynamic storage mechanism ("split heap"), which is being tuned. You may find that some CircuitPython programs fail with MemoryError. If you encounter programs that work in 8.x.x but get MemoryError exceptions, consider filing an issue with details.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

Notable changes to 9.0.0 since 8.x.x

Audio

• Add synthio.Note .loop_start and .loop_end properties.
• Add synthio.Synthesizer.note_state.
• Add I2S MCLK support on Espressif.
• Allow signed amplitude in synthio.

Built-in modules

• Add OrderedDict.move_to_end().
• Add warnings module, similar to what is in CPython.
• Add locale.getlocale().
• Add codeop.compile_command().
• Remove 8.x.x deprecations: displayio.*.show(), I2CPeripheral renamed to I2CTarget.

Graphics

• Reorganize and split displayio. 8.x.x naming structure is available in 9.x.x, but will be removed in 10.0.0.
• Add jpegio JPEG decoder support.
• Add bitmapfilter image manipulation.

Internal

• New split-heap internal dynamic storage mechanism.
• Merge updates from MicroPython v1.19.1, v1.20.0, and v1.21.0.
• Espressif: update to ESP-IDF v5.1.2.

Networking

• Allow specifying protocol for raw sockets.
• Add mDNS TXT record support.
• Make SD cards available over web workflow.
• API change: Require explicit socket port reuse. Use socket.setsockopt(pool.SOL_SOCKET, pool.SO_REUSEADDR, 1), as in CPython.

Python interpreter

• Use terser error messages on small builds.

Storage

• CIRCUITPY drives now mount on Android.
• Increased file capacity on CIRCUITPY drives <= 128kB.
• Require filesystem mounts to be on existing directories. Create /sd in fresh filesystems to provide a mount point.

Supervisor

• Add repl.py, which runs just before the REPL starts up.

USB

• Video device ("Webcam", UVC) support.
• HID can wake up sleeping host computer.
• Further USB host support, on i.MX and RP2040.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0-beta.0

Fixes and enhancements

• Require explicit socket port reuse (SO_REUSEADDR). #8940. Thanks @tannewt.
• Update frozen submodules. #8938. Thanks @dhalbert.
• Update root certificates to include ssl.com RSA root. #8935. Thanks @dhalbert.
• Prevent out-of-range USB MSC reads. Fixes problem with Samsung Disk Magician. #8933. Thanks @drath42 and @jepler.
• Set socket type on accepted socket. #8932. Thanks @jepler.
• Increase CDC RX buffer size to allow better ctrl-C handling. #8929. Thanks @tannewt.
• Fix crash when appending to read-only displayio.Group, such as CIRCUITPYTHON_TERMINAL. #8923. Thanks @jepler.
• Fix JpegDecoder arguments. #8905. Thanks @FoamyGuy.
• Restore <module>.file attribute. #8881. Thanks @jepler.
• Allow RGBMatrix framebuffer size to be more than 65535 bytes. #8864, #8847. Thanks @jepler.
• Allow zero-size blit in bitmaptools. #8880. Thanks @FoamyGuy.
• Allow creating a mount point on an existing directory, in preparation 9.0.0 for capability. #8864, #8863. Thanks @jepler.
• Create /sd/placeholder.txt to document and provide a mount point for SD cards. #8860. Thanks @jepler.
• Add bitmapfilter.blend(). #8859. Thanks @jepler.
• Fix .keys() for dict subclasses. #8851. Thanks @dhalbert.
• USB video device (UVC) support. #8831. Thanks @jepler.
• Correct sys.version to say "CircuitPython. #8808. Thanks @bill88t.
• USB host keyboard: add function keys and other keys. #8807. Thanks @iyalosovetsky.

Port and board-specific changes

Broadcom

Espressif

• Fix and speed up TLS access to sites using elliptic-curve certificates. #8924. Thanks @dhalbert.
• Turn off _bleio on 4MB ESP32-S3 boards and refactor _bleio setting for other boards. #82924. Thanks @dhalbert.
• Reduce NeoPixel animation glitching. #8920. Thanks @tannewt.
• Fix socket failures by disabling variable length SSL buffers. #8913. Thanks @tannewt.
• Use new ESP-IDF PCNT, RMT, and timer group drivers. #8909. Thanks @tannewt.
• Correct flash and PSRAM speeds. #8870. Thanks @tannewt.
• Disable non-working i2ctarget. #8869. Thanks @tannewt.
• Allocate SPIRAM only via caps_alloc(). #8868. Thanks @tannewt.
• Re-enable ParallelDisplayBus. #8862. Thanks @tannewt.

i.MX

• Fix DigitalInOut.deinit(). #8928. Thanks @tannewt.
• Fix UART issues. #8928. Thanks @tannewt.

nRF

RP2040

• Swap PIO allocation for USB host for better operation on Pico W. #8922. Thanks @jepler.
• Update CYW43 driver to Adafruit fork. #8861. Thanks @eightycc.

SAMx

SiLabs

Spresense

STM

Individual boards

• Adafruit Feather RP240 USB Host: allow control of board.USB_HOST_5V_POWER pin. #8471. Thanks @jepler.
• Espressif ESP32-S3 Eye: add OV2640 support. #8901. Thanks @jerryneedell.
• Pimoroni Pico DV Base W: fix I2S audio pin assignments. #8915. Thanks @RetiredWizard.
• UnexpectedMaker Bling: Pin changes. #8853. Thanks @UnexpectedMaker.

Documentation changes

• Fix some type annotations in synthio. #8895. Thanks @jepler.
• Add board-specific stub file generation. #8882. Thanks @FoamyGuy.
• Use terser error messages on smaller builds. #8844. Thanks @dhalbert.

Build and infrastructure changes

• Update to pre-commit/[email protected] to get Node.js 20 support. #8936. Thanks @dhalbert.
• Report errors as failures in build-board-info.py. #8934. Thanks @jepler.
• Include branch and PR number in PR merge firmware filenames. #8930. Thanks @dhalbert.
• Refactor mbedtls use to shared-module/. #8926. Thanks @jepler.
• Fix problems found while developing ports/posix. #8900. Thanks @jepler.
• Fix tools/test-stubs.sh. #8898. Thanks @justmobilize.
• Fix circuitpython_setboard OS path separator. #8894. Thanks @justmobilize.
• Document how to use MP_REGISTER_MODULE. #8849. Thanks @jepler.

Translation additions and improvements

• Thanks for translations:
  • @andibing (English - UK)
  • @wtuemura (Portugese - Brazil)

New boards since 9.0.0-beta.0

• Adafruit Floppsy RP2040. #8834. Thanks @jepler.
• M5Stack Dial. #8931. Thanks @CDarius.
• Pimoroni Inky Frame 7.3in. #8896. Thanks @kattni.

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 9.0.0
  • long term

Thanks

Thank you to all who used, tested, and contributed to 9.0.0-beta.1, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 8.2.10

This is CircuitPython 8.2.10, the latest bugfix revision of CircuitPython, and is a new stable release.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later. The 8.2.0 firmware is larger than what the bootloader can handle. See these instructions for updating your bootloader.

Notable changes to 8.2.10 since 8.2.9

• Fix EPaperDisplay garbage collection.
• Add proto argument to SocketPool.socket constructor to allow specifying protocol.
• Allow RGBMatrix framebuffer size to be more than 65535 bytes.
• Allow creating a mount point on an existing directory.
• Individual board fixes.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 8.2.9

Fixes and enhancements

• Allow creating a mount point on an existing directory, in preparation for 9.0.0 capability. #8863. Thanks @jepler.
• Allow RGBMatrix framebuffer size to be more than 65535 bytes. #8847. Thanks @jepler.
• Fix EPaperDisplay refresh sequence garbage collection. #8843, #8839. Thanks @tannewt.
• Add proto argument to SocketPool.socket constructor to allow specifying protocol. #8752. Thanks @carson-coder.
• Detect and reject RLE-compress BMP files in OnDiskBitmap. #8735. Thanks @dhalbert.

Port and board-specific changes

Broadcom

Espressif

i.MX

nRF

RP2040

SAMx

SiLabs

Spresense

STM

Individual boards

• M5Stack Atom Lite: Add IR LED prin. #8747. Thanks @carson-coder.
• Pimoroni DV Base: Fix I2S audio pin assignments. #8906. Thanks @RetiredWizard.
• UnexpectedMaker Bling: Pin changes. #8852. Thanks @UnexpectedMaker.
• UnexpectedMaker Tiny Watch S3: Fix power shutdown pin. #8716. Thanks @prplz.

Documentation changes

Build and infrastructure changes

Translation additions and improvements

New or removed boards since 8.2.9

Known issues

• ESP32-S3 has significant issues with I2C devices that sleep or use clock stretching. Retry operations on these devices as necessary, or use ESP32-S2 boards. This problem is fixed in current 9.0.0 builds
• Espressif boards have ESP-IDF storage leaks and occasionally crash after extended WiFi use.
• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 8.2.x
  • 9.0.0
  • long term

Thanks

Thank you to all who used, tested, and contributed since 8.2.9, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

CircuitPython 9.0.0 Beta 0

This is CircuitPython 9.0.0-beta.0, a beta release for 9.0.0, and is a new unstable release. This release has known bugs that will be addressed before 9.0.0 final.

NOTE: CircuitPython 9.0.0-alpha.4 and later use a new internal dynamic storage mechanism ("split heap"), which is being tuned. You may find that some CircuitPython programs fail with MemoryError. If you encounter programs that work in 8.x.x but get MemoryError exceptions, consider filing an issue with details.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

Notable changes to 9.0.0

• New split-heap internal dynamic storage mechanism.
• Merge updates from MicroPython v1.19.1, v1.20.0, and v1.21.0.
• Espressif: update to ESP-IDF v5.1.2.
• Reorganize and split displayio. 8.x.x naming structure is available in 9.x.x, but will be removed in 10.0.0.
• CIRCUITPY drives now mount on Android.
• Increased file capacity on CIRCUITPY drives <= 128kB.
• Further USB host support, on i.MX and RP2040.
• Make SD cards available over web workflow. storage.mount() now requires that a directory exists at the mount path. It may need to be created over USB.
• Remove 8.x.x deprecations: displayio.*.show(), I2CPeripheral renamed to I2CTarget.
• Add jpegio JPEG decoder support.
• Add bitmapfilter image manipulation.
• Add repl.py, which runs just before the REPL starts up.
• Add OrderedDict.move_to_end().
• Add synthio.Synthesizer.note_state.
• Add warnings module, similar to what is in CPython.
• Add locale.getlocale().
• Add I2S MCLK support on Espressif.
• Add mDNS TXT record support.
• Add synthio.Note .loop_start and .loop_end properties.
• Allow signed amplitude in synthio.
• HID can wake up sleeping host computer.
• Allow specifying protocol for raw sockets.
• Add codeop.compile_command().

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

• atmel-samd: Microchip SAMD21, SAMx5x
• cxd56: Sony Spresense
• espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C3
• nrf: Nordic nRF52840, nRF52833
• raspberrypi: Raspberry Pi RP2040
• stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

• broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
• litex: fomu
• mimxrt10xx: NXP i.MX RT10xxx
• silabs: Silicon Labs MG24 family
• stm: ST non-STM32F4 chip families

Changes since 9.0.0-alpha.6

Fixes and enhancements

• Update frozen libraries. #8845. Thanks @dhalbert.
• Allow supervisor.reload() to work from REPL. #8840. Thanks @tannewt.
• Prevent EPaperDisplay refresh sequence from being garbage-collected. #8839. Thanks @tannewt.
• Allow HID devices to wake sleeping host computer. #8830. Thanks @meesokim and @dhalbert.
• Fix problems with subclassing dict. #8828. Thanks @tannewt.
• Fix bitmaptools range check. #8823. Thanks @furbrain.
• Fix LED count in HID keyboard report descriptor. #8813. Thanks @tlyu.
• Update TinyUSB to 0.16.0. #8809. Thanks @jepler.
• Add bitmapfilter image manipulation. #8786. Thanks @jepler.
• Fix JPegDecoder.decode(). #8784. Thanks @jepler.
• Allow specifying protocol for raw sockets. #8769, #8752. Thanks @carson-coder and @jepler.
• Re-enable binascii.crc32(). #8767. Thanks @dhalbert.
• Merge in fixes and board changes from 8.2.9. #8748. Thanks @dhalbert.
• Clear output line during boot for serial-only boards. #8725. Thanks @bill88t.
• Enhance JpegDecoder. #8723. Thanks @jepler.
• Add codeop.compile_command(). #8720. Thanks @jepler.
• Make SD cards available over web workflow. #8699. Thanks @tannewt.

Port and board-specific changes

Broadcom

Espressif

• Allocate heap objects from SPIRAM first, before using internal RAM. #8835. Thanks @tannewt.

i.MX

nRF

• Time out when I2C bus hangs. #8827. Thanks @furbrain.
• Allow UART peripheral to power down when sleeping. #8825. Thanks @furbrain.

RP2040

• Allow swapped audio channels in audiopwmio. #8792. Thanks @SalamCytron.

SAMx

SiLabs

• Fix bleio.Descriptor.add_to_characteristic(). #8795. Thanks @picospuch.

Spresense

STM

Individual boards

• Adafruit ESP32-S3 Camera MEMENTO: Add pins. #8731. Thanks @BlitzCityDIY.
• Adafruit MatrixPortal S3: Fix A0 pin. #8805. Thanks @tannewt.
• FireBeetle ESP32-S3: Fix I2C and pins. #8838, #8782. Thanks @bill88t.
• Flipper WiFi: Fix PID. #8744. Thanks @maewolfsky.
• LILYGO TTGO TI S2 ST7789: Fix screen rotation. #8773. Thanks @RetiredWizard.
• LILYGO TTGO T-Display ESP32 16MB flash: Pin and display fixes. #8787. Thanks @kreier.
• LILYGO TTGO T-Display RP2040: Pin and display fixes. #8772. Thanks @kreier.
• M5Stack M5Paper: Remove board.DISPLAY as display initialization code is not yet written. #8841. Thanks @tannewt.
• M5Stack Timer Camera: Incrase PSRAM speed. #8724. Thanks @bill88t.

Documentation changes

• Fix typo in Espressif README. #8803. Thanks @romkey.

Build and infrastructure changes

• Update CI actions to versions that use Node.js 20. #8833. Thanks @dhalbert.
• Ensure ulab submodule is present when doing translation checks. #8768. Thanks @jepler.
• Share the implementation of hashlib across ports. #8749. Thanks @jepler.

Translation additions and improvements

• Thanks for translations:
  • @andibing (English - UK)
  • @bergdahl (Swedish)
  • @hexthat (Chinese - Pinyin)
  • @Saentis (German)
  • @SideSpoilenm (Japanese)
  • 오수아 (Korean)
  • @wtuemura (Portugese - Brazil)

New boards since 9.0.0-alpha.6

• Cytron EDU PICO. #8800. Thanks @SalamCytron.
• Double Take Labs COLUMBIA-DSL-SENSOR-BOARD-V1. #8791. Thanks @joshcorn.
• Espressif ESP32 DevKitc V4 WROOM-32E. #8806. Thanks @dlizotte-uwo.
• Espressif ESP32 DevKitc V4 WROVER. #8806. Thanks @dlizotte-uwo.
• LILYGO TTGO T-Display ESP32 4MB flash. #8787. Thanks @kreier.
• PicoMo. #8836. Thanks @supcik.

Known issues

• See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:
  • 8.2.x
  • 9.0.0
  • long term

Thanks

Thank you to all who used, tested, and contributed since 9.0.0-alpha.6, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.