You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I'm using Asus RT-AX88U with Dual Wan enabled (second wan is via usb lte dongle). As you can see in the screenshot below entity "Secondary WAN" is set as "Connected" although it is not in reality (look at the secondary WAN IP):
On the router configuration page the status of the secondary wan is "Cold - Standby":
Question - is it possible to get the value "Disconnected" in this integration given the fact that secondary wan is actually disconnected?
Thanks!
Your device model
RT-AX88U
Firmware type
Merlin
Firmware version
3004.388.7
Integration version with the issue
0.31
Method of the integration installation
HACS
What version and type of Home Assistant installation do you use
Core 2024.5.3
Is there anything useful in the logs?
No response
Diagnostics information
No response
Additional information
No response
The text was updated successfully, but these errors were encountered:
Can you please show what does the attribute link look like? Unfortunately, I don't have LTE dongles, but when tested with phone and tethering, it works as expected. Might be, USB modems report differently
EDIT: Ok, I have restarted the router and it magically jumped to "Disconnected". Reloaded the integration - same magic has happened. I will leave this defect open and observe the behavior for a few days - if this was just a glitch then I will close it.
The problem
Hi,
I'm using Asus RT-AX88U with Dual Wan enabled (second wan is via usb lte dongle). As you can see in the screenshot below entity "Secondary WAN" is set as "Connected" although it is not in reality (look at the secondary WAN IP):
On the router configuration page the status of the secondary wan is "Cold - Standby":
Question - is it possible to get the value "Disconnected" in this integration given the fact that secondary wan is actually disconnected?
Thanks!
Your device model
RT-AX88U
Firmware type
Merlin
Firmware version
3004.388.7
Integration version with the issue
0.31
Method of the integration installation
HACS
What version and type of Home Assistant installation do you use
Core 2024.5.3
Is there anything useful in the logs?
No response
Diagnostics information
No response
Additional information
No response
The text was updated successfully, but these errors were encountered: