7.0.2 (New G-Mode, enhanced curve presentation, enhanced overboost)

[T-Troll]

Important! If you are using tools for the first time, please read Beginner's guide and AlienFX-GUI readme to configure out it's concept and operation principle.

Important! If you are migrating from version 5.x.x.x, open application folder and run alienfx-conv to convert registry configuration. In case you don't do so, you lost your color and effect settings (forever), as well as haptics and ambient settings (until converted).

Changes into this release:

All fan-control apps:

• G-mode switch logic re-worked, now should work with any G-series BIOS.
• New overboost calculation logic (now faster).
• Bug fixed: Overboost can be set below 100.

Fan-control GUI apps:

• New: Current fan state visualization clanged. Now big yellow/green dots follow the boost proposed by the sensor (from its curve). Red dot present real hardware situation.

AlienFan-CLI:

• Bug fixed: Manual overboost set for fan work incorrectly.

AlienFX-Mon:

• Now you can select direction for alarm - should it be raised above or below alarm border.

---

This discussion was created from the release 7.0.2 (New G-Mode, enhanced curve presentation, enhanced overboost).