alarm-panel-pro-v1.8-ethernet.yaml

####
##
## Konnected Alarm Panel Pro v1.8 (ESP32)
## Firmware configuration for ESPHome
##
## filename: alarm-panel-pro-v1.8-ethernet.yaml
## GitHub: https://github.com/konnected-io/konnected-esphome
## Buy Konnected hardware: https://konnected.io
## Help & Support: https://help@konnected.io (support is provided for purchasers of Konnected hardware)
##
## Copyright© 2023 Konnected Inc.
##
## Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation 
## files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, 
## modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software
## is furnished to do so, subject to the following conditions:
##
## The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
##
## THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
## OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE 
## LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR 
## IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
##
####

####
# GENERAL SETTINGS
# Customize these variables to your preferences and needs
# more: https://esphome.io/guides/configuration-types.html#substitutions
substitutions:

  ####
  # NAME
  # By default, the name of the ESPHome device is "alarm-panel-pro-xxxxxx" where xxxxxx is a unique identifier. The device's
  # hostname on your network is also defined by the name, defaulting to "alarm-panel-pro-xxxxxx.local". Edit this variable to
  # customize the name and hostname. Note: only lowercase characters, numbers and hyphen(-) are allowed.
  name: alarm-panel-pro
  friendly_name: Alarm Panel Pro
  project_name: konnected.alarm-panel-pro-ethernet
  project_version: "1.0.0"

  # ETHERNET CONFIG
  # On the Alarm Panel Pro v1.5, v1.6 and v1.7 use LAN8720. On the v1.8 set this variable to RTL8201.
  ethernet_type: RTL8201

  sensor_debounce_time: 200ms
  warning_beep_pulse_time: 100ms
  warning_beep_pause_time: 130ms
  warning_beep_internal_only: "false"
  warning_beep_shared: "false"
  blink_on_state: "true"

  ####
  # ZONE MAPPING
  # Do not edit this section.
  zone1: GPIO4
  zone2: GPIO2
  zone3: GPIO15
  zone4: GPIO13
  zone5: GPIO18
  zone6: GPIO14
  zone7: GPIO33
  zone8: GPIO32
  zone9: GPIO36
  zone10: GPIO39
  zone11: GPIO34
  zone12: GPIO35
  alarm1: GPIO12
  alarm2: GPIO5
  out1: GPIO23
  out2: GPIO5
  status_led: GPIO3
  
  ####
  # CONNECTION MAPPINGS
  warning_beep_pin: $out1

####
# PACKAGES
# Each package includes the alarm panel feature
# Remove or comment out any packages that you do not need or want.
# If you're developing/installing locally, replace the github package line with the local package include above it.
packages:

  remote_package:
    url: http://github.com/konnected-io/konnected-esphome
    ref: master
    refresh: 5min
    files:

      ####
      # CORE
      # This package is required and sets up core features.
      - packages/core-esp32.yaml

      ####
      # ETHERNET
      # Enables ethernet connectivity.
      - packages/ethernet.yaml

      ####
      # STATUS LED
      # Enables the onboard blue status LED as an activity/error indicator
      - packages/status-led.yaml

      ####
      # INPUT ZONES
      - packages/alarm-panel/zone1.yaml
      - packages/alarm-panel/zone2.yaml
      - packages/alarm-panel/zone3.yaml
      - packages/alarm-panel/zone4.yaml
      - packages/alarm-panel/zone5.yaml
      - packages/alarm-panel/zone6.yaml
      - packages/alarm-panel/zone7.yaml
      - packages/alarm-panel/zone8.yaml
      - packages/alarm-panel/zone9.yaml
      - packages/alarm-panel/zone10.yaml
      - packages/alarm-panel/zone11.yaml
      - packages/alarm-panel/zone12.yaml

      ####
      # OUTPUTS
      - packages/alarm-panel/alarm1.yaml
      - packages/alarm-panel/alarm2.yaml

      ####
      # WARNING BEEP
      # Enables a 'Warning Beep' entity, intended to be used with a piezo buzzer. This is 
      # implemented using a light entity with strobe effect to create a repeated beeping sound.
      - packages/warning-beep.yaml
  
  
dashboard_import:
  package_import_url: github://konnected-io/konnected-esphome/alarm-panel-pro-v1.8-ethernet.yaml@master
  import_full_config: false

####
# WEB SEVER
# Enables the built-in web server for viewing the device state, internals and controls via web browser
# on the same local network as the device.
web_server:
  include_internal: true

#### 
# LOGGER
# more: https://esphome.io/components/logger.html
logger:

####
# NATIVE API for HOME ASSISTANT
# Enables the native API for Home Assistant
# more: https://esphome.io/components/api.html
api:

#### 
# OTA UPDATES
# Enables over-the-air updates
# more: https://esphome.io/components/ota.html
ota: