README.sodaq

To create a bootloader for Sodaq Moja use the following
command:

$ make -C optiboot BAUD_RATE=57600 clean atmega328_pro8

This creates the following two files:
optiboot_atmega328_pro_8MHz_baud57600.hex
optiboot_atmega328_pro_8MHz_baud57600.lst

You can place this two files in your Arduino installation
in this directory:
  hardware/arduino/bootloaders/optiboot

And in the boards.txt you can add these lines

##############################################################

SodaqMoja.name=Sodaq Moja

SodaqMoja.upload.protocol=arduino
SodaqMoja.upload.maximum_size=32256
SodaqMoja.upload.speed=57600
SodaqMoja.upload.disable_flushing=true

SodaqMoja.bootloader.low_fuses=0xff
SodaqMoja.bootloader.high_fuses=0xde
SodaqMoja.bootloader.extended_fuses=0x05
SodaqMoja.bootloader.path=optiboot
SodaqMoja.bootloader.file=optiboot_atmega328_pro_8MHz_baud57600.hex
SodaqMoja.bootloader.unlock_bits=0x3F
SodaqMoja.bootloader.lock_bits=0x0F

SodaqMoja.build.mcu=atmega328p
SodaqMoja.build.f_cpu=8000000L
SodaqMoja.build.core=arduino:arduino
SodaqMoja.build.variant=arduino:standard