reComputer Industrial J20 Hardware and Interfaces Usage | Seeed Studio Wiki #1350
Replies: 2 comments 4 replies
-
More details on this for use on reComputer Industrial J3011 POE Camera on PSE Port (validation example - camera model & software would be helpful) "The leftmost connector is directy connected to the Jetson module and is able to provide PoE functionality with PSE 802.3 af, 15W specification. This means you can connect a PoE IP camera or any other PoE device to this port to provide power to the connected device". |
Beta Was this translation helpful? Give feedback.
-
As of Jetpack 6.0 the guide to use the GPIO is deprecated. gpiod hast to be used. However on my Industrial Jetson Orin Nano The table is not the same as shown. |
Beta Was this translation helpful? Give feedback.
-
reComputer Industrial J20 Hardware and Interfaces Usage | Seeed Studio Wiki
Hardware and Interfaces Usage for reComputer Industrial J20 Series
https://wiki.seeedstudio.com/reComputer_Industrial_J20_Hardware_Interfaces_Usage/
Beta Was this translation helpful? Give feedback.
All reactions