Skip to content

Latest commit

 

History

History
59 lines (46 loc) · 3.51 KB

README.md

File metadata and controls

59 lines (46 loc) · 3.51 KB
Raw

Installing Castmill Player

  1. Perform a factory reset (only required for VitrineMedia screens)

    The screen comes preinstalled and preconfigured with apps from VitrineMedia that will disturb CastmillPlayer. To avoid this a factory reset should be performed

    1. Go to Settings -> Backup & reset and choose Factory data reset image
    2. Wait while the screen resets and reboots

  2. Allow “Unknown Sources”

    1. Go to Settings -> Security -> Unknown Sources and activate Allow installation of apps from unknown sources

  3. Configure Wifi under Settings -> Wifi

  4. Download and install Teamviewer Host

    1. Download Teamviewer Host from

      TeamViewer Alternative download

    2. Open Downloads on home screen Install the downloaded app

    3. Configure TeamViewer by opening this link

      Configure

    4. Accept remote access by clicking ASSIGN

      image

    5. Click INSTALL when asked whether to install add Add-On

      image

    6. Wait for download to complete and then click INSTALL again when download has been completed

      image

    7. Once installed, navigate to the Accessibility menu of the Android device and enable the Universal Add-On Accessibility Service. Allow accessibility service

  5. Install Castmill Player

    1. Download Castmill Player and Castmill Watchdog.

      Android5 Android11
      old Castmill Player new Castmill Player
      old Castmill Watchdog new Castmill Watchdog

    2. Install both apk files

      image

    3. Launch Castmill Player and wait for the registration view to appear

      image

    4. Register the player in https://tyloprint.castmill.io using the pin displayed on the screen

  6. Verify the installation

    1. Check that all the following apps appear under Settings -> Apps Castmill Player, Castmill Watchdog, Host, QuickSupport Add-On

      image

    2. Go back to home screen and open the app Host Check that the app is connected to Castmill Admin as in the screenshot below

      image

    3. Go back to home screen and open the app Castmill Player Check that the app starts and that the Player is online in tyloprint.castmill.io

      image