This file documents the build process for libmapper for various operating systems, and will be updated as the libmapper core project progresses. Supports Linux, MacOS and Windows platforms.
libmapper depends on version 0.30 of liblo or later. Please consult the LibLo project page for details.
The GNU configure step detects liblo using the "pkg-config" program. This is usually already installed in Linux systems, but on MacOS, we recommend installing it via MacPorts or HomeBrew. In the future libmapper packages for MacPorts and HomeBrew will be directly provided, but this is not yet the case.
You may wish to manually check that the correct version of liblo is detected, by running,
pkg-config --libs --cflags liblo
If the path to liblo is not correct, please set up the
PKG_CONFIG_PATH environment variable appropriately and try again.
libmapper also has optional dependencies on the Java SDK and Doxygen, for Java bindings, and documentation, respectively. The Java SDK may be installed according to your standard operating system procedure, and you can check if it is already installed by running,
javac -version
These should print the installed version numbers of these programs if
correctly configured. You may install the doxygen package
using your preferred package manager.
The examples folder also contains an audio example, which binds to
libasound on Linux, and CoreAudio on MacOS. On Ubuntu, you may
wish to installed libasound-dev package, or the corresponding
package on other Linux distributions.
If you have extracted libmapper from a release tarball, run,
./configure
to configure the software with default options. If you are using libmapper from a repository, you will need to run,
./autogen.sh
which will create the configure script and run it for you. You can
optionally specify an install location with,
./configure --prefix=<location>
It is recommended to either use /usr/local/ or a directory in your
home directory such as $HOME/.local. Users of HomeBrew on MacOS
should always use /usr/local.
If you will be hacking on libmapper or wish to have verbose output while it is running, we recommended enabling debug mode:
./configure --enable-debug
Additionally, Java and Python bindings, and audio examples, may be
disabled with options --disable-java, --disable-python, and
--disable-audio respectively.
After configure runs successfully, the configuration options will be
printed for your confirmation. If anything unexpected occurs, be sure
to check config.log for information about what failed.
Once the build is configured, build it with,
make
Should any errors occur, please inform the libmapper mailing list.
To verify that the library runs without errors, you may run the main test program, available in the test directory:
./test/test -t
This program creates devices and signals and tests sending data between them using maps. The -t flag will cause the test program to automatically terminate after sending 200 messages, so omit it if you want to keep the test running indefinitely.
Note that the programs in the test directory are not examples of
library usage, as they additionally test some internal functions in
the library. Please see the examples directory for examples of how
to use the library.
The software may be installed with,
sudo make install
This should place headers in <prefix>/include/mapper, the library
in <prefix>/lib, Python bindings in
<prefix>/lib/pythonXX/site-packages (where XX is your Python
version), and a pkg-config information file in
<prefix>/lib/pkgconfig.
Once installation is successful, you can check that the library is
found by pkg-config:
pkg-config --libs --cflags libmapper
Note that the Java bindings are not installed, as there is no standard location in which to put them. However, they can be copied to wherever is convenient for the classpath and java.library.path in your project. Instructions specific to Processing.org can be found in a dedicated section below.
As mentioned, you can test libmapper by running the test program,
test/test
This should create two devices, link them, connect their signals, and update a value continuously. The other device should report that it received the value.
You may wish to observe the multicast "admin" traffic, which can be
done by watching the multicast UDP port for OSC data using liblo's
oscdump utility:
oscdump 7570 224.0.1.3
You can also use a libmapper GUI, such as webmapper, to see that the devices and signals are discovered correctly. You can use the GUI to modify the connection properties, and observe that the received values are changed.
You should also test the Python and Java bindings if you plan to use them. Some other programs may depend on them – for example webmapper uses the Python bindings.
To test that the Python module is working, it is generally enough to run the following command,
python -m mapper
This will import the mapper module, which will fail if either
mapper.py or the native portion of the binding are not found. You
may need to adjust your PYTHONPATH variable to ensure these can be
found.
You can test running programs by cd'ing to the bindings/python
folder and running,
cd bindings/python
python test.py
or,
python tkgui.py
for a GUI example which brings up a single, mappable slider. Running
multiple copies of tkgui.py, you can try mapping one to another to
make sure libmapper is functional.
Similarly, the Java bindings may be tested by cd'ing to the bindings/java
folder and running test with the correct class and library paths:
cd bindings/java
java -cp libmapper.jar -Djava.library.path=.libs test
Cmake is required to generate visual studio solutions, and can be installed here. Add it to the environment path when prompted for terminal access later on.
You'll also need Visual Studio 2017 or 2019, which you can grab here. Be sure to install the MSVC C++ SDK when installing if you don't already have it.
Once cmake is installed and added to the environment path, libmapper and its dependencies (zlib and liblo) can be built the easy way by running windows_build.ps1 using powershell or "Run in powershell" form the right-click menu on the file. The libmapper, liblo and zlib dlls can be found in the dist/ directory. Tests can be run in dist/tests/ to verify the correct functions, but be sure to copy the dlls (zlib, liblo, libmapper) to the same folder as the executables or add their paths to your PATH environment variable.
To build the python wheel, run the windows_build_wheel.ps1 script from /bindings/python.
If you want to manually build from source, follow the instructions below. If you ran the powershell file above, you should be done!
libmapper depends on version 0.30 of liblo or later. Please clone the LibLo repository and consult its documentation to build for Windows.
Zlib is required as well, which you can pick up from nuget. You can use the Visual Studio Tools->NuGet Package Manager Console to install it easily.
Once libmapper is downloaded, open a terminal in its root folder.
Create a build directory and cd into it
mkdir ./build
cd build
Modify the CMakeLists.txt file in the root folder, replacing the paths near the top with your local paths.
Open /build/native/include/zconf.h and search for the line:
#ifndef Z_SOLO
which should be around line 476. Add the following line above it and save to avoid a common build error:
#undef Z_HAVE_UNISTD_H
Run the following to generate a solution, replacing your version's details:
cmake -G "Visual Studio 16 2019" ..
By now, you should have a Visual Studio solution in the ./build directory. Open the .sln and build the libmapper project.
Please remember that libmapper is still in a development and research phase. Although it is fairly robust at this point, since it is a distributed, asynchronous system there are many pieces involved, and supporting programs may have their own problems. As always, if you find a problem with libmapper or libmapper-enabled programs, please consult the mailing list.
Here, we address some common issues that new users encounter with the core libmapper library.
Windows Firewall may block libmapper's OSC multicast messages when on a Public network, which can be avoided by either marking any of your Public networks as Private with the 'Network profile' property or by turning off the firewall completely (at your own risk).
We have found that in some cases, especially on MacOS, there are programs that do not use the computer's native architecture. For example, Processing.org and Cycling 74's Max/MSP prior to v8 are 32-bit applications, even if you are running a 64-bit version of MacOS. Therefore after building libmapper, it will not work with these programs.
We recommend that on MacOS you build a universal binary, since we have found it saves a lot of trouble later on. Note that you must build universal binaries of liblo as well as libmapper.
To do so, for both liblo and libmapper, you must perform the
configure and make steps with the following flags:
./configure CFLAGS="-arch i386 -arch x86_64" \
CXXFLAGS="-arch i386 -arch x86_64" \
--disable-dependency-tracking
make
The file command should list both 32- and 64-bit architectures.
file src/.libs/libmapper.8.dylib
(Of course, replace ".8" with the current libmapper version.)
Although we do not explicitly list them here, similar steps should be performed for liblo.
Processing.org is a Java-based IDE and set of libraries for developing visualizations and interactive art. To use libmapper with Processing, you should place the Java Native Interface (JNI) bindings into the appropriate locations.
From the libmapper directory, create a directory called
libraries/libmapper/library under your sketchbook directory:
mkdir -p <sketchbook>/libraries/libmapper/library
Now copy the Java bindings to this directory, renaming the jar file to match the name of the directory:
cp bindings/java/.libs/libmapperjni.8.dylib <sketchbook>/libraries/libmapper/library/libmapperjni.dylib
cp bindings/java/libmapper.jar <sketchbook>/libraries/libmapper/library/libmapper.jar
Create a file export.txt:
echo 'name = libmapper' > "<sketchbook>/libraries/libmapper/library/export.txt"
Now, when you run the Processing IDE, you should see "libmapper" listed under "Sketch/Import Library...".
Choosing this will insert two lines at the top of your sketch:
import mapper.*;
import mapper.graph.*;
You can test it by creating a device and a signal:
Device dev = new Device("testdevice", 9000);
Signal out_x = dev.add_output_signal("x", 1, 'f', null,
new Double(0), new Double(1));
and make sure to poll the device during draw():
void draw() {
...
dev.poll(0);
...
}
Running this program should make a device called "testdevice" show up in a libmapper GUI. Use the steps in section "Testing", above, to check that the device is created correctly.
We have noticed that Processing.org does not always free devices correctly after closing the canvas window. The Java test program uses the following trick to ensure a finalizer is run when the JVM exits, but it is not clear whether this is a good procedure for Processing.org:
// This is how to ensure the device is freed when the program
// exits, even on SIGINT. The Device must be declared "final".
Runtime.getRuntime().addShutdownHook(new Thread()
{
@Override
public void run()
{
dev.free();
}
});
Since libmapper uses multicast instead of a central server, it must be made possible for all computers on the network to see the same multicast bus. A requirement is that they are on the same subnet, which usually means they are connected to the same router. It is possible to change the libmapper "TTL" settings, which expands the reachability of the network to multiple subnet hops, but this is considered an advanced usage scenario.
One problem that is often encountered especially by laptop users is that multicast messages are sent to the wrong network interface. Since the multicast IP address does not uniquely identify a single network route, it is necessary for the software to specify the desired NIC to use. Selection of the NIC is supported by libmapper, but programs may not always provide an interface for this.^[Such programs are non-conforming! All libmapper programs should display the current network interface and allow selection of it from a list of the computer's interfaces, either by name or by assigned IP address.]
Therefore one issue is especially prevalent, that computers may be connected to the internet via wireless (wifi), and connected to a router via a wired (ethernet) connection. We recommend that laptop users disable all but one interface while using libmapper. If this is unacceptable, the user is responsible for ensuring that libmapper programs are provided the correct NIC information.
In the future a better approach may be needed. Two ideas are:
- Always send multicast messages on all NICs.
- Provide a global configuration file for libmapper specifying which NIC to use.
Both of these solutions have their own complications, so if you have an opinion on this topic or a better idea, please post to the libmapper mailing list.