- Type: CAN Standard
- ID: 0x381
- DLC: 3
- Tx method: cycle
- Cycle time: 10s
Signal | Start bit | Length | Order | Value type | Factor | Offset | Unit |
---|---|---|---|---|---|---|---|
DISP_OIL_LEVEL | 0 | 8 | Intel | Unsigned | 1 | 0 | |
ST_DIPSTICK | 8 | 4 | Intel | Unsigned | 1 | 0 | |
Byte_3 | 16 | 8 | Intel | Unsigned | 1 | 0 |
-
DISP_OIL_LEVEL: seems to be a oil amount in the engine
-
ST_DIPSTICK: seems to contain a kind of measurement status:
Value | Description |
---|---|
0x0 | measurement in progress ? |
0x2 | messurement done ? |
- Posible indications:
- Engine oil level OK
- Oil level at minimum. Top up 1l engine oil
- Oil level below minimum. Top up 1l engine oil
- Engine oil level too high
- Measurement not possible at present
Status changes from 0 to 2 after the engine has been running for a while. Then a "correct" value is also displayed in DISP_OIL_LEVEL.
- Byte_3: always 0xFF.
Message example:
- 0x381 3 79 F0 FF
- 0x381 3 7C F0 FF
- 0x381 3 19 F2 FF