Skip to content

Latest commit

 

History

History
543 lines (368 loc) · 14 KB

README.md

File metadata and controls

543 lines (368 loc) · 14 KB
Raw

Discrete graphics usage detection

A simple application to verify if desired applications are running with discrete graphics

Indicates which processes are using discrete graphics, provides process name and ID.

Step 1: Open a terminal window and download the AppImage to your desired directory.

  • Ubuntu, Activities, search terminal. Fedora, horizontal line in the upper right, search terminal.
  • Copy and paste in the following depending on your specific distro listed below, followed by the enter key.

Ubuntu LTS users:

sudo apt install libfuse2 python3-pyqt5 && wget https://github.com/FrameworkComputer/dri_prime1-detection/releases/download/AppImage/dGPU-detect.AppImage

Fedora users:

sudo dnf install python3-qt5 && wget https://github.com/FrameworkComputer/dri_prime1-detection/releases/download/AppImage/dGPU-detect.AppImage

Step 2: Make it executable.

chmod +x dGPU-detect.AppImage

Step 4: Run this to detect if the discrete card is used for that application.

TIP: Alt and Tab keys to move you off of an actively launched game. Thus, allowing you to launch the AppImage. Then Alt Tab back to the game.

./dGPU-detect.AppImage or simply double click the downloaded AppImage file.

If the dGPU is not running applications:

No dGPU running any applications

If the dGPU is running applications:

dGPU running running applications

                

                

Steam game setup instructions for Ubuntu LTS (Long Term Support) - One NVMe drive

Configure Steam:

  • Download Steam from https://store.steampowered.com/about/
  • Once the Deb package is downloaded, right click in, install via Software Center.
  • Once installed, browse to Activities in the upper left corner, search for Steam, right click to open it selecting "Launch using integrated graphics."

Locate and launch Steam using INTEGRATED graphics

     

With Steam open.

  • Locate your game installed already or install it.
  • Right click on the game, goto properties.

Right click on the game, goto properties

     

Launch options section for dGPU users

  • Place the following into your launch options, to ensure you are using the discrete GPU and not the integrated GPU for your game.
DRI_PRIME=1 %command%
  • Close the General box at the X, there is no save button or anything like that.

                

NOTE: Some games may need addtional GPU details In this case, we'd replace DRI_PRIME=1 %command% and test against:

sudo apt update && sudo apt install vulkan-tools -y && vulkaninfo | grep "GPU[0123]" -A 10

Verify GPU1 is indeed, AMD Radeon RX 7700S (RADV NAVI33).

Now in the launch options:

DRI_PRIME=1 DXVK_FILTER_DEVICE_NAME="AMD Radeon RX 7700S (RADV NAVI33)" %command%

                

Steam game setup instructions for Ubuntu LTS (Long Term Support) - Two NVMe drives, installing games to secondary drive

Get your secondary drive ready

Format to Ext4 in Disks

  • Open Disks program, label as steamgames,format to Ext4. Close Disks.      

Beginner method for Ubuntu LTS:

Auto-mount second drive script.

   

Advanced method for Ubuntu LTS:

  • Open a terminal from the horizontal line in the upper left, search Terminal and open it.
cd /media && sudo mkdir steamgames
  • Let's get the ownership and permissions sorted correctly.
sudo chown $USER:$USER steamgames/ && sudo chmod 700 steamgames/

Let's check our work:

ls -ld steamgames/

  • You should see something like: drwx------. 1 youruser youruser 0 Month day 00:00 steamgames/

  • Now, we need to get this directory to a place where it identifies as the secondary NVMe drive.

sudo blkid | grep 'steamgames' | awk '{print $0}'
  • As we labeled the drive as steamgames, we were able use awk to easily locate it and see something like this:
/dev/nvme1n1p1: LABEL="steamgames" UUID="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"

  • We want the section (and yours will differ) UUID="b767cc57-0262-4ba5-be9d-b7f3387f3d59"

  • Now that we have this, we need to get this mounted by default and, make sure it plays nicely with Steam.

  • First, let's backup our fstab so if something goes horribly wrong, you can tell support you broke fstab, but you have a backup we can restore from. We'll open open the file from here as well.

sudo cp /etc/fstab /etc/fstab.bak && sudo nano /etc/fstab
  • Append the following to the bottom of your file, remember, we are using YOUR UUID found in your blkid results:
UUID=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   /media/steamgames  ext4  rw,users,exec,auto  0 0

  • Save the file with Ctrl X. Y key when asked.

  • Now reboot.

Configure Steam:

  • Download Steam from https://store.steampowered.com/about/
  • Once the Deb package is downloaded, right click in, install via Software Center.
  • Once installed, browse to Activities in the upper left corner, search for Steam, right click to open it selecting "Launch using integrated graphics."

Locate and launch Steam using INTEGRATED graphics

     

With Steam open.

  • Upper left menu option called "Steam", pull down, select "Settings", go down to "Storage".
  • Click Add Drive, choose Add a new Steam library folder - the option will appear like it does here. Close the settings dialog.       Click Add Drive, choose Add a new Steam library folder      
  • Locate your game, install it to steamgames drive. 

Locate your game, install it to steamgames drive      

  • Right click on the game, goto properties.

Right click on the game, goto properties

     

Launch options section for dGPU users

  • Place the following into your launch options, to ensure you are using the discrete GPU and not the integrated GPU for your game.
DRI_PRIME=1 %command%
  • Close the General box at the X, there is no save button or anything like that.

   

NOTE: Some games may need addtional GPU details In this case, we'd replace DRI_PRIME=1 %command% and test against:

sudo apt update && sudo apt install vulkan-tools -y && vulkaninfo | grep "GPU[0123]" -A 10

Verify GPU1 is indeed, AMD Radeon RX 7700S (RADV NAVI33).

Now in the launch options:

DRI_PRIME=1 DXVK_FILTER_DEVICE_NAME="AMD Radeon RX 7700S (RADV NAVI33)" %command%

            

                

Steam game setup instructions for Fedora - One NVMe drive

Configure Steam:

  • Install Steam from the Software application in the dock. Search for Steam install the Flatpak.
  • Once installed, browse to the horizontal line in the upper left corner, click to open it, search for Steam.

Locate and launch Steam normally

     

With Steam open.

  • Locate your game installed already or install it.
  • Right click on the game, goto properties.

Right click on the game, goto properties

     

Launch options section for dGPU users

  • Place the following into your launch options, to ensure you are using the discrete GPU and not the integrated GPU for your game.
DRI_PRIME=1 %command%
  • Close the General box at the X, there is no save button or anything like that.

   

NOTE: Some games may need addtional GPU details In this case, we'd replace DRI_PRIME=1 %command% and test against:

sudo dnf install vulkan-tools -y && vulkaninfo | grep "GPU[0123]" -A 10

Verify GPU1 is indeed, AMD Radeon RX 7700S (RADV NAVI33).

Now in the launch options:

DRI_PRIME=1 DXVK_FILTER_DEVICE_NAME="AMD Radeon RX 7700S (RADV NAVI33)" %command%

            

                

Steam game setup instructions for Fedora - Two NVMe drives, installing games to secondary drive

Get your secondary drive ready

Format to Ext4 in Disks

Beginner method:

Auto-mount second drive script.

   

Advanced method:

  • Open Disks program, label as steamgames,format to Ext4. Close Disks.    

  • Open a terminal from the horizontal line in the upper left, search Terminal and open it.

cd /media && sudo mkdir steamgames
  • Let's get the ownership and permissions sorted correctly.
sudo chown $USER:$USER steamgames/ && sudo chmod 700 steamgames/

Let's check our work:

ls -ld steamgames/

  • You should see something like: drwx------. 1 youruser youruser 0 Month day 00:00 steamgames/

  • Now, we need to get this directory to a place where it identifies as the secondary NVMe drive.

sudo blkid | grep 'steamgames' | awk '{print $0}'
  • As we labeled the drive as steamgames, we were able use awk to easily locate it and see something like this:
/dev/nvme1n1p1: LABEL="steamgames" UUID="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"

  • We want the section (and yours will differ) UUID="b767cc57-0262-4ba5-be9d-b7f3387f3d59"

  • Now that we have this, we need to get this mounted by default and, make sure it plays nicely with Steam.

  • First, let's backup our fstab so if something goes horribly wrong, you can tell support you broke fstab, but you have a backup we can restore from. We'll open open the file from here as well.

sudo cp /etc/fstab /etc/fstab.bak && sudo nano /etc/fstab
  • Append the following to the bottom of your file, remember, we are using YOUR UUID found in your blkid results:
UUID=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   /media/steamgames  ext4  rw,users,exec,auto  0 0

  • Save the file with Ctrl X. Y key when asked.

  • Now reboot.

Configure Steam:

  • Install Steam from the Software application in the dock. Search for Steam install the Flatpak.
  • Do the same by installing an application called Flatseal - this is what will bridge together your Steam flatpak and your games drive.
  • Once installed, browse to the horizontal line in the upper left corner, click to open it, search for Steam.      

Setup Flatseal      

  • Open Flatseal.    

In Flatseal, for Steam, set Filesystem, Other files as /media/steamgames      

  • In Flatseal, for Steam, set Filesystem, Other files as /media/steamgames
  • Close Flatseal, just x out of it. Nothing to save.

     

  • Open Steam, launch Steam normally with a single left click.

Locate and launch Steam normally

With Steam open.

  • Upper left menu option called "Steam", pull down, select "Settings", go down to "Storage".
  • Click Add Drive, choose Add a new Steam library folder - the option will appear like it does here. Close the settings dialog.       Click Add Drive, choose Add a new Steam library folder      
  • Locate your game, install it to steamgames drive. 

Locate your game, install it to steamgames drive      

  • Right click on the game, goto properties.

Right click on the game, goto properties

     

Launch options section for dGPU users

  • Place the following into your launch options, to ensure you are using the discrete GPU and not the integrated GPU for your game.
DRI_PRIME=1 %command%
  • Close the General box at the X, there is no save button or anything like that.

   

NOTE: Some games may need addtional GPU details In this case, we'd replace DRI_PRIME=1 %command% and test against:

sudo dnf install vulkan-tools -y && vulkaninfo | grep "GPU[0123]" -A 10

Verify GPU1 is indeed, AMD Radeon RX 7700S (RADV NAVI33).

Now in the launch options:

DRI_PRIME=1 DXVK_FILTER_DEVICE_NAME="AMD Radeon RX 7700S (RADV NAVI33)" %command%