diff --git a/docs/11-Vehicle-Specific/Mazda-MX5-Miata/11-Miata-MX5-Quick-Start.md b/docs/11-Vehicle-Specific/Mazda-MX5-Miata/11-Miata-MX5-Quick-Start.md
index 601bab5..ca42d54 100644
--- a/docs/11-Vehicle-Specific/Mazda-MX5-Miata/11-Miata-MX5-Quick-Start.md
+++ b/docs/11-Vehicle-Specific/Mazda-MX5-Miata/11-Miata-MX5-Quick-Start.md
@@ -167,7 +167,7 @@ Next, click the tab labelled _Tune Analyze Live! - Tune For You_ to bring up the
 | vBatt                        | 12   |
 | Minimum TPS                  | 3    |
 
-Now that the autotuner is set up, start the car and click _Start Auto Tune_ on the autotuner. Let the car idle in park whilst it gets up to the minimum temperature. While this happens, you can change the idle cells in the VE table to get them to a lambda of 1. Follow the Cursor on the VE table while idling and adjust the values your car is at while monitoring the lambda value. Once the car has warmed up its time to auto tune. After you are sufficiently happy, click Stop Auto Tune, turn the engine off and click Save on ECU. Below is a auto tune guideline
+Now that the autotuner is set up, start the car and click _Start Auto Tune_ on the autotuner. Let the car idle in park whilst it gets up to the minimum temperature. While this happens, you can change the idle cells in the VE table to get them to a lambda of 1. Follow the Cursor on the VE table while idling and adjust the values your car is at while monitoring the lambda value. Once the car has warmed up its time to autotune. After you are sufficiently happy, click Stop Auto Tune, turn the engine off and click Save on ECU. Below is an autotune guideline.
 
 ## Safety First
 
@@ -220,10 +220,10 @@ Now that the autotuner is set up, start the car and click _Start Auto Tune_ on t
 ### 1. Repeat and Refine
 
 - Drive again, following the same driving guidelines to gather more data and further refine the settings in autotune to achieve a better VE table.
-- Multiple iterations with multiple settings may be necessary to achieve an optimal VE table. 
+- Multiple iterations with multiple settings may be necessary to achieve an optimal VE table.
 - You can Lock cells by highlighting them and locking them. Such as Idle or Coasting sections.
 
-For Example 
+For Example:
 
 | **Setting** | **Value** |
 |------------------------------|----- |