WeeWX 5 - Cannot load configurator for WLLDriver

[G400]

WeeWX 5.0.2

weectl device --info
Using configuration file /etc/weewx/weewx.conf
Using driver user.WLLDriver.
Cannot load configurator for WLLDriver.

sudo weectl device --history=30
Using configuration file /etc/weewx/weewx.conf
Using driver user.WLLDriver.
Cannot load configurator for WLLDriver.

Is this a bug in driver or a mistake made by me when installing?

WLLDriver was installed using:
sudo weectl extension WLLDriver.zip

Verified to be installed:
weectl extension list
Using configuration file /etc/weewx/weewx.conf
Extension Name Version Description
WLLDriver 0.4 Request data to WLL and lost data from Weatherlink.com
crt 0.21 Emit a Cumulus realtime.txt for LOOP data.

[Drealine]

Hi
Please post an output of debug log of weewx
Thank you

[G400]

Here it is. I have modified to remove private config

System info
Platform: Linux-5.15.0-94-generic-x86_64-with-glibc2.35
Python Version: 3.10.12

Load Information
1 minute load average: 0.04
5 minute load average: 0.02
15 minute load average: 0.00

General Weewx info
Weewx version 5.0.2 detected.

Currently installed extensions
Extension Name Version Description
WLLDriver 0.4 Request data to WLL and lost data from Weatherlink.com
crt 0.21 Emit a Cumulus realtime.txt for LOOP data.

Archive info
Database name: weewx.sdb
Table name: archive
Version 4.0
Unit system: 17 (METRICWX)
First good timestamp: 2022-07-19 14:25:00 CEST (1658233500)
Last good timestamp: 2024-02-19 14:55:00 CET (1708350900)
Number of records: 160695
weewx (weewx.conf) is set to use an archive interval of 300 seconds.
The station hardware was not interrogated to determine the archive interval.

Supported SQL keys
dateTime usUnits interval
altimeter appTemp appTemp1
barometer batteryStatus1 batteryStatus2
batteryStatus3 batteryStatus4 batteryStatus5
batteryStatus6 batteryStatus7 batteryStatus8
cloudbase co co2
consBatteryVoltage dewpoint dewpoint1
ET extraHumid1 extraHumid2
extraHumid3 extraHumid4 extraHumid5
extraHumid6 extraHumid7 extraHumid8
extraTemp1 extraTemp2 extraTemp3
extraTemp4 extraTemp5 extraTemp6
extraTemp7 extraTemp8 forecast
hail hailBatteryStatus hailRate
heatindex heatindex1 heatingTemp
heatingVoltage humidex humidex1
inDewpoint inHumidity inTemp
inTempBatteryStatus leafTemp1 leafTemp2
leafWet1 leafWet2 lightning_distance
lightning_disturber_count lightning_energy lightning_noise_count
lightning_strike_count luminosity maxSolarRad
nh3 no2 noise
o3 outHumidity outTemp
outTempBatteryStatus pb pm10_0
pm1_0 pm2_5 pressure
radiation rain rainBatteryStatus
rainRate referenceVoltage rxCheckPercent
signal1 signal2 signal3
signal4 signal5 signal6
signal7 signal8 snow
snowBatteryStatus snowDepth snowMoisture
snowRate so2 soilMoist1
soilMoist2 soilMoist3 soilMoist4
soilTemp1 soilTemp2 soilTemp3
soilTemp4 supplyVoltage txBatteryStatus
UV uvBatteryStatus windBatteryStatus
windchill windDir windGust
windGustDir windrun windSpeed

Databases configured in weewx.conf:
archive_sqlite:
database_name weewx.sdb
driver weedb.sqlite
SQLITE_ROOT /etc/weewx/archive
archive_mysql:
database_name weewx
driver weedb.mysql
host localhost
user weewx
password weewx

--- Start configuration file /etc/weewx/weewx.conf ---

WEEWX CONFIGURATION FILE

Copyright (c) 2009-2024 Tom Keffer [email protected]

See the file LICENSE.txt for your rights.

##############################################################################

This section is for general configuration information.

Set to 1 for extra debug info, otherwise comment it out or set to zero.

debug = 0

Root directory of the weewx data file hierarchy for this station

WEEWX_ROOT = /etc/weewx

Whether to log successful operations. May get overridden below.

log_success = True

Whether to log unsuccessful operations. May get overridden below.

log_failure = True

This configuration file was created by ...

version = 5.0.2
config_path = /etc/weewx/weewx.conf
WEEWX_ROOT_CONFIG = /etc/weewx

##############################################################################

This section is for information about the station.

[Station]

# Description of the station location, such as your town.
location = Torgvegen

# Latitude in decimal degrees. Negative for southern hemisphere.
latitude = 58
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = 5.

# Altitude of the station, with the unit it is in. This is used only
# if the hardware cannot supply a value.
altitude = 56, meter    # Choose 'foot' or 'meter' for unit

# Set to type of station hardware. There must be a corresponding stanza
# in this file, which includes a value for the 'driver' option.
#station_type = Vantage
station_type = WLLDriver

# If you have a website, you may specify an URL. The URL is required if you
# intend to register your station. The URL must include the scheme, for
# example, "http://" or "https://"
#station_url = https://www.example.com

# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1

# Start of week (0=Monday, 6=Sunday)
week_start = 0

##############################################################################

[WLLDriver]
driver = user.WLLDriver
max_tries = 10
retry_wait = 15
poll_interval = 5
realtime_enable = 0
hostname = xxx.xxx.xxx.xxx
time_out = 10
device_id = iss:1
wl_archive_enable = 0

##############################################################################

[Simulator]
# This section is for the weewx weather station simulator

# The time (in seconds) between LOOP packets.
loop_interval = 2.5

# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator.  Emit LOOP packets as fast as possible (useful for testing).
#mode = generator

# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default 
# is to use the present time.
#start = 2011-01-01T00:00

# The driver to use:
driver = weewx.drivers.simulator

##############################################################################

[Vantage]
# This section is for the Davis Vantage series of weather stations.

# Connection type: serial or ethernet 
#  serial (the classic VantagePro)
#  ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial

# If the connection type is serial, a port must be specified:
#   Debian, Ubuntu, Redhat, Fedora, and SuSE:
#     /dev/ttyUSB0 is a common USB port name
#     /dev/ttyS0   is a common serial port name
#   BSD:
#     /dev/cuaU0   is a common serial port name
port = /dev/ttyUSB0

# If the connection type is ethernet, an IP Address/hostname is required:
host = xxx.xxx.xxx.xxx

######################################################
# The rest of this section rarely needs any attention. 
# You can safely leave it "as is."
######################################################

# Serial baud rate (usually 19200)
baudrate = 19200

# TCP port (when using the WeatherLinkIP)
tcp_port = 22222

# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5

# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1

# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1

# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4

# How long to wait before trying again (in seconds)
wait_before_retry = 1.2

# How many times to try before giving up:
max_tries = 4

# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2

# The driver to use:
driver = weewx.drivers.vantage

##############################################################################

This section is for uploading data to Internet sites

[StdRESTful]

# Uncomment and change to override logging for uploading services.
# log_success = True
# log_failure = True

[[StationRegistry]]
    # To register this weather station at weewx.com, set this to true, and
    # set option 'station_url', located in the [Station] section above.
    register_this_station = False

[[AWEKAS]]
    # This section is for configuring posts to AWEKAS.
    
    # If you wish to post to AWEKAS, set the option 'enable' to true, then
    # specify a username and password.
    # Use quotes around the password to guard against parsing errors.
    enable = false
    username = XXXXXX
    password = XXXXXX

[[CWOP]]
    # This section is for configuring posts to CWOP.
    
    # If you wish to post to CWOP, set the option 'enable' to true,
    # then specify the station ID (e.g., CW1234).
    enable = false
    station = XXXXXX
    # If this is an APRS (radio amateur) station, specify the
    # passcode (e.g., 12345). Otherwise, ignore.
    passcode = XXXXXX

[[PWSweather]]
    # This section is for configuring posts to PWSweather.com.
    
    # If you wish to post to PWSweather.com, set the option 'enable' to
    # true, then specify a station and password.
    # Use quotes around the password to guard against parsing errors.
    enable = false
    station = XXXXXX
    password = XXXXXX

[[WOW]]
    # This section is for configuring posts to WOW.
    
    # If you wish to post to WOW, set the option 'enable' to true, then
    # specify a station and password.
    # Use quotes around the password to guard against parsing errors.
    enable = false
    station = XXXXXX
    password = XXXXXX

[[Wunderground]]
    # This section is for configuring posts to the Weather Underground.
    
    # If you wish to do this, set the option 'enable' to true,
    # and specify a station (e.g., 'KORHOODR3') and password.
    # To guard against parsing errors, put the password in quotes.
    enable = false
    station = replace_me
    password = replace_me
  
    
    
    # If you plan on using wunderfixer, set the following
    # to your API key:
    api_key = XXXXXX
    
    # Set the following to True to have weewx use the WU "Rapidfire"
    # protocol. Not all hardware can support it. See the User's Guide.
    rapidfire = False

##############################################################################

This section specifies what reports, using which skins, to generate.

[StdReport]

# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins

# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx

# Uncomment and change to override logging for reports.
# log_success = True
# log_failure = True

# The database binding indicates which data should be used in reports.
data_binding = wx_binding

# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.

[[SeasonsReport]]
    # The SeasonsReport uses the 'Seasons' skin, which contains the
    # images, templates and plots for the report.
    skin = Seasons
    enable = true

[[SmartphoneReport]]
    # The SmartphoneReport uses the 'Smartphone' skin, and the images and
    # files are placed in a dedicated subdirectory.
    skin = Smartphone
    enable = false
    HTML_ROOT = /var/www/html/weewx/smartphone

[[MobileReport]]
    # The MobileReport uses the 'Mobile' skin, and the images and files
    # are placed in a dedicated subdirectory.
    skin = Mobile
    enable = false
    HTML_ROOT = /var/www/html/weewx/mobile

[[StandardReport]]
    # This is the old "Standard" skin. By default, it is not enabled.
    skin = Standard
    enable = false

[[FTP]]
    # FTP'ing the results to a webserver is treated as just another report,
    # albeit one with an unusual report generator!
    skin = Ftp
    
    # If you wish to use FTP, set "enable" to "true", then fill out the
    # next four lines.
    # Use quotes around the password to guard against parsing errors.
    enable = false
    user = XXXXXX
    password = XXXXXX
    server = XXXXXX    # The ftp server name, e.g, www.myserver.org
    path = replace_me    # The destination directory, e.g., /weather
    
    # Set to True for an FTP over TLS (FTPS) connection. Not all servers
    # support this.
    secure_ftp = False
    
    # To upload files from something other than what HTML_ROOT is set
    # to above, specify a different HTML_ROOT here.
    #HTML_ROOT = /var/www/html/weewx
    
    # Most FTP servers use port 21.
    port = 21
    
    # Set to 1 to use passive mode, zero for active mode
    passive = 1

[[RSYNC]]
    # rsync'ing to a webserver is treated as just another report.
    skin = Rsync
    
    # If you wish to use rsync, you must configure passwordless ssh using
    # public/private key authentication from the user account that weewx
    # runs to the user account on the remote machine where the files
    # will be copied.
    #
    # If you wish to use rsync, set "enable" to "true", then
    # fill out server, user, and path.
    # The server should appear in your .ssh/config file.
    # The user is the username used in the identity file.
    # The path is the destination directory, such as /var/www/html/weather.
    # Be sure that the user has write permissions on the destination!
    enable = false
    server = XXXXXX
    user = XXXXXX
    path = replace_me
    
    # To upload files from something other than what HTML_ROOT is set
    # to above, specify a different HTML_ROOT here.
    #HTML_ROOT = /var/www/html/weewx
    
    # Rsync can be configured to remove files from the remote server if
    # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
    # make a mistake in the remote path, you could could unintentionally
    # cause unrelated files to be deleted. Set to 1 to enable remote file
    # deletion, zero to allow files to accumulate remotely.
    delete = 0

# Options in the [[Defaults]] section below will apply to all reports.
# What follows are a few of the more popular options you may want to
# uncomment, then change.
[[Defaults]]
    
    # Which language to use for all reports. Not all skins support all
    # languages.  You can override this for individual reports.
    lang = en
    
    # Which unit system to use for all reports. Choices are 'us', 'metric',
    # or 'metricwx'.  You can override this for individual reports.
    unit_system = metricwx
    
    [[[Units]]]
        
        # Option "unit_system" above sets the general unit system, but
        # overriding specific unit groups is possible. These are popular
        # choices. Uncomment and set as appropriate.  The unit is always
        # in the singular, e.g., 'mile_per_hour', NOT 'miles_per_hour'
        [[[[Groups]]]]
            # group_altitude     = meter              # Options are 'foot' or 'meter'
            # group_pressure     = mbar               # Options are 'inHg', 'mmHg', 'mbar', or 'hPa'
            # group_rain         = mm                 # Options are 'inch', 'cm', or 'mm'
            # group_rainrate     = mm_per_hour        # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
            # group_temperature  = degree_C           # Options are 'degree_C', 'degree_F', or 'degree_K'
            # The following line is used to keep the above lines indented
            # properly. It can be ignored.
            unused = unused
        
        # Uncommenting the following section frequently results in more
        # attractive formatting of times and dates, but may not work in
        # your locale.
        [[[[TimeFormats]]]]
            # day        = %H:%M
            # week       = %H:%M on %A
            # month      = %d-%b-%Y %H:%M
            # year       = %d-%b-%Y %H:%M
            # rainyear   = %d-%b-%Y %H:%M
            # current    = %d-%b-%Y %H:%M
            # ephem_day  = %H:%M
            # ephem_year = %d-%b-%Y %H:%M
            # The following line is used to keep the above lines indented
            # properly. It can be ignored.
            unused = unused
    
    [[[Labels]]]
        # Users frequently change the labels for these observation types.
        [[[[Generic]]]]
            # inHumidity     = Inside Humidity
            # inTemp         = Inside Temperature
            # outHumidity    = Outside Humidity
            # outTemp        = Outside Temperature
            # extraTemp1     = Temperature1
            # extraTemp2     = Temperature2
            # extraTemp3     = Temperature3
            # The following line is used to keep the above lines indented
            # properly. It can be ignored.
            unused = unused

##############################################################################

This service converts the unit system coming from the hardware to a unit

system in the database.

[StdConvert]

# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.

# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = METRICWX    # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

This section can adjust data using calibration expressions.

[StdCalibrate]

[[Corrections]]
    # For each type, an arbitrary calibration expression can be given.
    # It should be in the units defined in the StdConvert section.
    # Example:
    foo = foo + 0.2

##############################################################################

This section is for quality control checks. If units are not specified,

values must be in the units defined in the StdConvert section.

[StdQC]

[[MinMax]]
    barometer = 26, 32.5, inHg
    pressure = 24, 34.5, inHg
    outTemp = -40, 120, degree_F
    inTemp = 10, 120, degree_F
    outHumidity = 0, 100
    inHumidity = 0, 100
    windSpeed = 0, 120, mile_per_hour
    rain = 0, 10, inch

##############################################################################

This section controls the origin of derived values.

[StdWXCalculate]

[[Calculations]]
    # How to calculate derived quantities.  Possible values are:
    #  hardware        - use the value provided by hardware
    #  software        - use the value calculated by weewx
    #  prefer_hardware - use value provide by hardware if available,
    #                      otherwise use value calculated by weewx
    
    pressure = prefer_hardware
    altimeter = prefer_hardware
    appTemp = prefer_hardware
    barometer = prefer_hardware
    cloudbase = prefer_hardware
    dewpoint = prefer_hardware
    ET = prefer_hardware
    heatindex = prefer_hardware
    humidex = prefer_hardware
    inDewpoint = prefer_hardware
    maxSolarRad = prefer_hardware
    rainRate = prefer_hardware
    windchill = prefer_hardware
    windrun = prefer_hardware

##############################################################################

For hardware that supports it, this section controls how often the

onboard clock gets updated.

[StdTimeSynch]

# How often to check the weather station clock for drift (in seconds)
clock_check = 5

# How much it can drift before we will correct it (in seconds)
max_drift = 1

##############################################################################

This section is for configuring the archive service.

[StdArchive]

# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300

# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware

# Whether to include LOOP data in hi/low statistics.
loop_hilo = True

# Uncomment and change to override logging for archive operations.
# log_success = True
log_failure = True

# The data binding used to save archive records.
data_binding = wx_binding

##############################################################################

This section binds a data store to a database.

[DataBindings]

[[wx_binding]]
    # The database must match one of the sections in [Databases].
    # This is likely to be the only option you would want to change.
    database = archive_sqlite
    # The name of the table within the database.
    table_name = archive
    # The manager handles aggregation of data for historical summaries.
    manager = weewx.manager.DaySummaryManager
    # The schema defines the structure of the database.
    # It is *only* used when the database is created.
    schema = schemas.wview_extended.schema

##############################################################################

This section defines various databases.

[Databases]

# A SQLite database is simply a single file.
[[archive_sqlite]]
    database_name = weewx.sdb
    database_type = SQLite

# MySQL
[[archive_mysql]]
    database_name = weewx
    database_type = MySQL

##############################################################################

This section defines defaults for the different types of databases.

[DatabaseTypes]

# Defaults for SQLite databases.
[[SQLite]]
    driver = weedb.sqlite
    # Directory in which database files are located, relative to WEEWX_ROOT
    #SQLITE_ROOT = /var/lib/weewx
    SQLITE_ROOT = %(WEEWX_ROOT)s/archive

# Defaults for MySQL databases.
[[MySQL]]
    driver = weedb.mysql
    # The host where the database is located.
    host = localhost
    # The user name for logging in to the host.
    user = XXXXXX
    # Use quotes around the password to guard against parsing errors.
    password = XXXXXX

##############################################################################

This section configures the internal weewx engine.

[Engine]

# This section specifies which services should be run and in what order.
[[Services]]
    prep_services = weewx.engine.StdTimeSynch
    data_services = ,
    process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.crt.CumulusRealTime
    xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta
    archive_services = weewx.engine.StdArchive
    restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS

[CumulusRealTime]
filename = /xx/xx/realtime.txt
[Accumulator]
[[rainRate]]
extractor = max

[Drealine]

Ok. Can you turn debug to all and give output of /var/log/syslog if you're in Linux system or found the log file where is located based your distribution.
Thank you