apm-server.yml

################### APM Server Configuration #########################

############################# APM Server ######################################

apm-server:
  # Defines the host and port the server is listening on.  use "unix:/path/to.sock" to listen on a unix domain socket.
  host: "0.0.0.0:8200"

  # Maximum permitted size in bytes of an unzipped request accepted by the server to be processed.
  #max_unzipped_size: 31457280
  # Maximum permitted size in bytes of a request's header accepted by the server to be processed.
  #max_header_size: 1048576

  # Maximum duration request will be queued before being read.
  #max_request_queue_time: 2s
  # Maximum permitted duration for reading an entire request.
  #read_timeout: 30s
  # Maximum permitted duration for writing a response.
  #write_timeout: 30s

  # Maximum duration in seconds before releasing resources when shutting down the server.
  #shutdown_timeout: 5s

  # Maximum number of requests permitted to be sent to the server concurrently.
  #concurrent_requests: 5

  # Maximum number of new connections to accept simultaneously (0 means unlimited)
  # max_connections: 0

  # Authorization token to be checked. If a token is set here the agents must
  # send their token in the following format: Authorization: Bearer <secret-token>.
  # It is recommended to use an authorization token in combination with SSL enabled.
  #secret_token:
  #ssl.enabled: false
  #ssl.certificate : "path/to/cert"
  #ssl.key : "path/to/private_key"

  # Please be aware that frontend support is an experimental feature at the moment!
  frontend:
    # To enable experimental frontend support set this to true.
    enabled: false

      # Rate limit per second and IP address for requests sent to the frontend endpoint.
      #rate_limit: 10

      # Comma separated list of permitted origins for frontend. User-agents will send
      # a origin header that will be validated against this list.
      # An origin is made of a protocol scheme, host and port, without the url path.
      # Allowed origins in this setting can have * to match anything (eg.: http://*.example.com)
      # If an item in the list is a single '*', everything will be allowed
      #allow_origins : ['*']

      # Regexp to be matched against a stacktrace frame's `file_name` and `abs_path` attributes.
      # If the regexp matches, the stacktrace frame is considered to be a library frame.
      #library_pattern: "node_modules|bower_components|~"

      # Regexp to be matched against a stacktrace frame's `file_name`.
      # If the regexp matches, the stacktrace frame is not used for calculating error groups.
      # The default pattern excludes stacktrace frames that have a filename starting with '/webpack'
      #exclude_from_grouping: "^/webpack"

      # If a source map has previously been uploaded, source mapping is automatically applied
      # to all error and transaction documents sent to the frontend endpoint.
      #source_mapping:

      # Source maps are are fetched from Elasticsearch and then kept in an in-memory cache for a certain time.
      # The `cache.expiration` determines how long a source map should be cached before fetching it again from Elasticsearch.
      # Note that values configured without a time unit will be interpreted as seconds.
      #cache:
      #expiration: 5m

      # Source maps are stored in a seperate index.
      # If the default index pattern for source maps at 'outputs.elasticsearch.indices'
      # is changed, a matching index pattern needs to be specified here.
      #index_pattern: "apm-*-sourcemap*"

    # If set to true, APM Server augments data received by the agent with the original IP of the backend server,
    # or the IP and User Agent of the real user (frontend requests). It defaults to true.
    #capture_personal_data: true

    # golang expvar support - https://golang.org/pkg/expvar/
    #expvar:
    # Set to true to Expose expvar
    #enabled: false

    # Url to expose expvar
    #url: "/debug/vars"


    #================================ General ======================================

    # Internal queue configuration for buffering events to be published.
    #queue:
    # Queue type by name (default 'mem')
    # The memory queue will present all available events (up to the outputs
    # bulk_max_size) to the output, the moment the output is ready to server
    # another batch of events.
    #mem:
    # Max number of events the queue can buffer.
    #events: 4096

    # Hints the minimum number of events stored in the queue,
    # before providing a batch of events to the outputs.
    # A value of 0 (the default) ensures events are immediately available
    # to be sent to the outputs.
    #flush.min_events: 2048

    # Maximum duration after which events are available to the outputs,
    # if the number of events stored in the queue is < min_flush_events.
    #flush.timeout: 1s

# Sets the maximum number of CPUs that can be executing simultaneously. The
# default is the number of logical CPUs available in the system.
#max_procs:


#==================== Elasticsearch template setting ==========================

# Elasticsearch template settings
setup.template.settings:

  # A dictionary of settings to place into the settings.index dictionary
  # of the Elasticsearch template. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping.html
  index:
    number_of_shards: 1
    codec: best_compression
    #number_of_routing_shards: 30


    #============================== Dashboards =====================================
    #
    # These settings control loading the sample dashboards to the Kibana index. Loading
    # the dashboards are disabled by default and can be enabled either by setting the
    # options here, or by using the `-setup` CLI flag or the `setup` command.
    #setup.dashboards.enabled: false

    # The directory from where to read the dashboards. The default is the `kibana`
    # folder in the home path.
    #setup.dashboards.directory: ${path.home}/kibana

    # The URL from where to download the dashboards archive. It is used instead of
    # the directory if it has a value.
    #setup.dashboards.url:

    # The file archive (zip file) from where to read the dashboards. It is used instead
    # of the directory when it has a value.
    #setup.dashboards.file:

    # The name of the Kibana index to use for setting the configuration. Default is ".kibana"
    #setup.dashboards.kibana_index: .kibana

    # The Elasticsearch index name. This overwrites the index name defined in the
    # dashboards and index pattern. Example: testbeat-*
    # The dashboards.index needs to be changed in case the elasticsearch index pattern is modified.
    #setup.dashboards.index:

    # Always use the Kibana API for loading the dashboards instead of autodetecting
    # how to install the dashboards by first querying Elasticsearch.
    #setup.dashboards.always_kibana: false

    # If true and Kibana is not reachable at the time when dashboards are loaded,
    # it will retry to reconnect to Kibana instead of exiting with an error.
    #setup.dashboards.retry.enabled: false

    # Duration interval between Kibana connection retries.
    #setup.dashboards.retry.interval: 1s

    # Maximum number of retries before exiting with an error, 0 for unlimited retrying.
    #setup.dashboards.retry.maximum: 0


    #============================== Template =====================================

    # A template is used to set the mapping in Elasticsearch
    # By default template loading is enabled and the template is loaded.
    # These settings can be adjusted to load your own template or overwrite existing ones.

    # Set to false to disable template loading.
    #setup.template.enabled: true

    # Template name. By default the template name is "apm-%{[beat.version]}"
    # The template name and pattern has to be set in case the elasticsearch index pattern is modified.
    #setup.template.name: "apm-%{[beat.version]}"

    # Template pattern. By default the template pattern is "apm-%{[beat.version]}-*" to apply to the default index settings.
    # The first part is the version of the beat and then -* is used to match all daily indices.
    # The template name and pattern has to be set in case the elasticsearch index pattern is modified.
    #setup.template.pattern: "apm-%{[beat.version]}-*"

    # Path to fields.yml file to generate the template
    #setup.template.fields: "${path.config}/fields.yml"

    # Overwrite existing template
    #setup.template.overwrite: false

    # Elasticsearch template settings
    #setup.template.settings:

    # A dictionary of settings to place into the settings.index dictionary
    # of the Elasticsearch template. For more details, please check
    # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping.html
    #index:
    #number_of_shards: 1
    #codec: best_compression
    #number_of_routing_shards: 30

    # A dictionary of settings for the _source field. For more details, please check
    # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping-source-field.html
    #_source:
    #enabled: false


  #============================== Kibana =====================================

  # Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
  # This requires a Kibana endpoint configuration.
  #setup.kibana:

  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  #host: "localhost:5601"

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

  # Optional HTTP Path
  #path: ""

  # Use SSL settings for HTTPS. Default is true.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []


#================================ Outputs =====================================

# Configure what output to use when sending the data collected by the beat.

#-------------------------- Elasticsearch output ------------------------------
output.elasticsearch:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify and additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  hosts: ["elasticsearch:9200"]

  # Set gzip compression level.
  #compression_level: 0

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  username: "elastic"
  password: "changeme"

    # Dictionary of HTTP parameters to pass within the url with index operations.
    #parameters:
    #param1: value1
  #param2: value2

  # Number of workers per Elasticsearch host.
  #worker: 1

  # By using the configuration below, apm documents are stored to separate indices,
  # depending on their `processor.event`:
  # - error
  # - transaction
  # - span
  # - sourcemap (experimental feature)
  #
  # The indices are all prefixed with `apm-%{[beat.version]}`.
  # To allow managing indices based on their age, all indices (except for sourcemaps)
  # end with the information of the day they got indexed.
  # e.g. "apm-6.3.0-transaction-2018.03.20"
  #
  # Be aware that you can only specify one Elasticsearch template and one Kibana Index Pattern,
  # In case you modify the index patterns you must also update those configurations accordingly,
  # as they need to be aligned:
  # * `setup.template.name`
  # * `setup.template.pattern`
  # * `setup.dashboards.index`
  #index: "apm-%{[beat.version]}-%{+yyyy.MM.dd}"
  indices:
    - index: "apm-%{[beat.version]}-sourcemap"
      when.contains:
        processor.event: "sourcemap"

    - index: "apm-%{[beat.version]}-error-%{+yyyy.MM.dd}"
      when.contains:
        processor.event: "error"

    - index: "apm-%{[beat.version]}-transaction-%{+yyyy.MM.dd}"
      when.contains:
        processor.event: "transaction"

    - index: "apm-%{[beat.version]}-span-%{+yyyy.MM.dd}"
      when.contains:
        processor.event: "span"

  # Optional ingest node pipeline. By default no pipeline will be used.
  #pipeline: ""

  # Optional HTTP Path
  #path: "/elasticsearch"

  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header

  # Proxy server url
  #proxy_url: http://proxy:3128

  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # The default is 50.
  #bulk_max_size: 50

  # Configure http request timeout before failing an request to Elasticsearch.
  #timeout: 90

  # Use SSL settings for HTTPS. Default is true.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

  #----------------------------- Console output ---------------------------------
  #output.console:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Pretty print json event
  #pretty: false


  #================================= Paths ======================================

  # The home path for the apm-server installation. This is the default base path
  # for all other path settings and for miscellaneous files that come with the
  # distribution (for example, the sample dashboards).
  # If not set by a CLI flag or in the configuration file, the default for the
  # home path is the location of the binary.
  #path.home:

  # The configuration path for the apm-server installation. This is the default
  # base path for configuration files, including the main YAML configuration file
  # and the Elasticsearch template file. If not set by a CLI flag or in the
  # configuration file, the default for the configuration path is the home path.
  #path.config: ${path.home}

  # The data path for the apm-server installation. This is the default base path
  # for all the files in which apm-server needs to store its data. If not set by a
  # CLI flag or in the configuration file, the default for the data path is a data
  # subdirectory inside the home path.
  #path.data: ${path.home}/data

  # The logs path for a apm-server installation. This is the default location for
  # the Beat's log files. If not set by a CLI flag or in the configuration file,
  # the default for the logs path is a logs subdirectory inside the home path.
  #path.logs: ${path.home}/logs


  #================================ Logging ======================================
  #
  # There are three options for the log output: syslog, file, stderr.
  # Under Windows systems, the log files are per default sent to the file output,
  # under all other system per default to syslog.

  # Sets log level. The default log level is info.
  # Available log levels are: error, warning, info, debug
  #logging.level: info

  # Enable debug output for selected components. To enable all selectors use ["*"]
  # Other available selectors are "beat", "publish", "service"
  # Multiple selectors can be chained.
  #logging.selectors: [ ]

  # Send all logging output to syslog. The default is false.
  #logging.to_syslog: true

  # If enabled, apm-server periodically logs its internal metrics that have changed
  # in the last period. For each metric that changed, the delta from the value at
  # the beginning of the period is logged. Also, the total values for
  # all non-zero internal metrics are logged on shutdown. The default is true.
  #logging.metrics.enabled: true

  # The period after which to log the internal metrics. The default is 30s.
  #logging.metrics.period: 30s

  # Logging to rotating files. Set logging.to_files to false to disable logging to
  # files.
  #logging.to_files: true
  #logging.files:
  # Configure the path where the logs are written. The default is the logs directory
  # under the home path (the binary location).
  #path: /var/log/apm-server

  # The name of the files where the logs are written to.
  #name: apm-server

  # Configure log file size limit. If limit is reached, log file will be
  # automatically rotated
  #rotateeverybytes: 10485760 # = 10MB

  # Number of rotated log files to keep. Oldest files will be deleted first.
  #keepfiles: 7

  # The permissions mask to apply when rotating log files. The default value is 0600.
  # Must be a valid Unix-style file permissions mask expressed in octal notation.
  #permissions: 0600

# Set to true to log messages in json format.
#logging.json: false


#================================ HTTP Endpoint ======================================
#
# Each beat can expose internal metrics through a HTTP endpoint. For security
# reasons the endpoint is disabled by default. This feature is currently experimental.
# Stats can be access through http://localhost:5066/stats . For pretty JSON output
# append ?pretty to the URL.

# Defines if the HTTP endpoint is enabled.
#http.enabled: false

# The HTTP endpoint will bind to this hostname or IP address. It is recommended to use only localhost.
#http.host: localhost

# Port on which the HTTP endpoint will bind. Default is 5066.
#http.port: 5066