English | 简体中文
Spiderpool is able to provide static IPs to Deployments, StatefulSets, and other types of applications in underlay networks. In this page, we'll introduce how to build a complete Underlay network environment in Calico + BGP mode, and integrate it with Spiderpool to enable fixed IP addresses for applications. This solution meets the following requirements:
-
Assign static IP addresses to applications
-
Scale IP pools dynamically based on replica counts
-
Enable external clients outside the cluster to access applications without their IPs
-
An available Kubernetes cluster with a recommended version higher than 1.22, where Calico is installed as the default CNI.
Make sure that Calico is not configured to use IPIP or VXLAN tunneling as we'll demonstrate how to use Calico for underlay networks.
Confirm that Calico has enabled BGP configuration in full-mesh mode.
-
Helm and Calicoctl
helm repo add spiderpool https://spidernet-io.github.io/spiderpool
helm repo update spiderpool
helm install spiderpool spiderpool/spiderpool --namespace kube-system --set multus.multusCNI.install=falseIf you are mainland user who is not available to access ghcr.io，You can specify the parameter
-set global.imageRegistryOverride=ghcr.m.daocloud.ioto avoid image pulling failures for Spiderpool.Specify the name of the NetworkAttachmentDefinition instance for the default CNI used by Multus via
multus.multusCNI.defaultCniCRName. If themultus.multusCNI.defaultCniCRNameoption is provided, an empty NetworkAttachmentDefinition instance will be automatically generated upon installation. Otherwise, Multus will attempt to create a NetworkAttachmentDefinition instance based on the first CNI configuration found in the /etc/cni/net.d directory. If no suitable configuration is found, a NetworkAttachmentDefinition instance nameddefaultwill be created to complete the installation of Multus.
Create the SpiderIPPool instance used by the Pod:
cat << EOF | kubectl apply -f -
apiVersion: spiderpool.spidernet.io/v2beta1
kind: SpiderIPPool
metadata:
name: nginx-ippool-v4
labels:
ipam.spidernet.io/subnet-cidr: 10-244-0-0-16
spec:
ips:
- 10.244.100.0-10.244.200.1
subnet: 10.244.0.0/16
EOFVerify the installation：
[root@master ~]# kubectl get po -n kube-system |grep spiderpool
spiderpool-agent-7hhkz 1/1 Running 0 13m
spiderpool-agent-kxf27 1/1 Running 0 13m
spiderpool-controller-76798dbb68-xnktr 1/1 Running 0 13m
spiderpool-init 0/1 Completed 0 13m
[root@master ~]# kubectl get sp
NAME VERSION SUBNET ALLOCATED-IP-COUNT TOTAL-IP-COUNT
nginx-ippool-v4 4 10.244.0.0/16 0 25602In this example, we want Calico to work in underlay mode and announce the subnet where Spiderpool's IPPool resides (10.244.0.0/16) to the BGP router via the BGP protocol, ensuring that clients outside the cluster can directly access the real IP addresses of the Pods through BGP router.
If you don't need external clients to access pod IPs directly, skip this step.
The network topology is as follows:
-
Configure a host outside the cluster as BGP Router
We will use an Ubuntu server as BGP Router. FRR needs to be installed beforehand:
root@router:~# apt install -y frr
FRR enable BGP:
root@router:~# sed -i 's/bgpd=no/bgpd=yes/' /etc/frr/daemons root@router:~# systemctl restart frr
Configure FRR:
root@router:~# vtysh router# config router(config)# router bgp 23000 router(config)# bgp router-id 172.16.13.1 router(config)# neighbor 172.16.13.11 remote-as 64512 router(config)# neighbor 172.16.13.21 remote-as 64512 router(config)# no bgp ebgp-requires-policy
Configuration descriptions:
- The AS on the router side is
23000, and the AS on the cluster node side is64512. The BGP neighbor relationship between the router and the node is ebgp, while the relationship between the nodes is ibgp. ebgp-requires-policyneeds to be disabled, otherwise the BGP session cannot be established.- 172.16.13.11/21 is the IP address of the cluster node.
For more information, refer to frrouting.
- The AS on the router side is
-
Configure BGP neighbor for Calico
calico_backend: birdneeds to be configured to establish a BGP session:[root@master1 ~]# kubectl get cm -n kube-system calico-config -o yaml apiVersion: v1 data: calico_backend: bird cluster_type: kubespray,bgp kind: ConfigMap metadata: annotations: kubectl.kubernetes.io/last-applied-configuration: | {"apiVersion":"v1","data":{"calico_backend":"bird","cluster_type":"kubespray,bgp"},"kind":"ConfigMap","metadata":{"annotations":{},"name":"calico-config","namespace":"kube-system"}} creationTimestamp: "2023-02-26T15:16:35Z" name: calico-config namespace: kube-system resourceVersion: "2056" uid: 001bbd09-9e6f-42c6-9339-39f71f81d363
In this example, the default route for the node is on BGP router. As a result, nodes simply need to synchronize their local routes with BGP Router without synchronizing them with each other. Consequently, Calico BGP Full-Mesh needs to be disabled:
[root@master1 ~]# calicoctl patch bgpconfiguration default -p '{"spec": {"nodeToNodeMeshEnabled": false}}'
Create BGPPeer:
[root@master1 ~]# cat << EOF | calicoctl apply -f - apiVersion: projectcalico.org/v3 kind: BGPPeer metadata: name: my-global-peer spec: peerIP: 172.16.13.1 asNumber: 23000 EOF
peerIP is the IP address of BGP Router
asNumber is the AS number of BGP Router
Check if the BGP session is established:
[root@master1 ~]# calicoctl node status Calico process is running. IPv4 BGP status +--------------+-----------+-------+------------+-------------+ | PEER ADDRESS | PEER TYPE | STATE | SINCE | INFO | +--------------+-----------+-------+------------+-------------+ | 172.16.13.1 | global | up | 2023-03-15 | Established | +--------------+-----------+-------+------------+-------------+ IPv6 BGP status No IPv6 peers found.
For more information on Calico BGP configuration, refer to Calico BGP.
Create a Calico IP pool with the same CIDR as the Spiderpool subnet, otherwise Calico won't advertise the route of the Spiderpool subnet:
cat << EOF | calicoctl apply -f -
apiVersion: projectcalico.org/v3
kind: IPPool
metadata:
name: spiderpool-subnet
spec:
blockSize: 26
cidr: 10.244.0.0/16
ipipMode: Never
natOutgoing: false
nodeSelector: all()
vxlanMode: Never
EOFThe CIDR needs to correspond to the subnet of Spiderpool:
10.244.0.0/16Set ipipMode and vxlanMode to: Never
Change the Calico CNI configuration file /etc/cni/net.d/10-calico.conflist on each node to switch the ipam field to Spiderpool:
"ipam": {
"type": "spiderpool"
},Take the Nginx application as an example:
cat <<EOF | kubectl create -f -
apiVersion: apps/v1
kind: Deployment
metadata:
name: nginx
spec:
replicas: 2
selector:
matchLabels:
app: nginx
template:
metadata:
annotations:
ipam.spidernet.io/ippool: '{"ipv4":["nginx-ippool-v4"]}' # (1)
labels:
app: nginx
spec:
containers:
- name: nginx
image: nginx
imagePullPolicy: IfNotPresent
ports:
- name: http
containerPort: 80
protocol: TCP
EOF- Assign static IPs from "nginx-ippool-v4" SpiderIPPool
When the application Pod is created, Spiderpool assigns the IP to the Pod from the ippool: nginx-ippool-v4 specified in the annotations.
[root@master1 ~]# kubectl get sp
NAME VERSION SUBNET ALLOCATED-IP-COUNT TOTAL-IP-COUNT DEFAULT DISABLE
nginx-ippool-v4 4 10.244.0.0/16 2 25602 false falseWhen replicas are restarted, their IPs are fixed within the range of the nginx-ippool-v4 IPPool:
[root@master1 ~]# kubectl get po -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-644659db67-szgcg 1/1 Running 0 23s 10.244.100.90 worker5 <none> <none>
nginx-644659db67-98rcg 1/1 Running 0 23s 10.244.100.92 master1 <none> <none>Expand the number of replicas to 3, the IP address of the new replica is still allocated from the IPPool: nginx-ippool-v4:
[root@master1 ~]# kubectl scale deploy nginx --replicas 3 # scale pods
deployment.apps/nginx scaled
[root@master1 ~]# kubectl get po -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-644659db67-szgcg 1/1 Running 0 1m 10.244.100.90 worker5 <none> <none>
nginx-644659db67-98rcg 1/1 Running 0 1m 10.244.100.92 master1 <none> <none>
nginx-644659db67-brqdg 1/1 Running 0 10s 10.244.100.94 master1 <none> <none>View IP pool: Added 1 to ALLOCATED-IP-COUNT of nginx-ippool-v4:
[root@master1 ~]# kubectl get sp
NAME VERSION SUBNET ALLOCATED-IP-COUNT TOTAL-IP-COUNT DEFAULT DISABLE
nginx-ippool-v4 4 10.244.0.0/16 3 5 false falseThe test result shows that clients outside the cluster can access Nginx Pods directly via their IP addresses. Nginx Pods can also communicate across cluster nodes, including Calico subnets. In Calico BGP mode, Spiderpool can be integrated with Calico to satisfy the fixed IP requirements for Deployments and other types of applications.