Skip to content

Latest commit

 

History

History
44 lines (34 loc) · 5.92 KB

README.md

File metadata and controls

44 lines (34 loc) · 5.92 KB
Raw

Extension of the IEEE 39-bus Test Network for the Study of Fundamental Dynamics of Modern Power System

We provide the full-replica dynamic models of three versions of the IEEE 39-bus power systems, to be used as a benchmark for studying the fundamental dynamics of modern power systems in the presence of inverter-connected devices.

The up-to-date 4 models correspond to three configurations of the IEEE 39-bus power system with different amount of inertia:

  • The original 10-synchronous machine system, noted as Config. I [topology]
  • A low-inertia system, 4 synchronous machines are replaced by 4 type-III wind power plants, noted as Config. II [topology]
  • Config. II implemented a Battery Energy Storage Systems (BESS) that integrated into the power grid through a Voltage Source Converter (VSC), noted as Config. II_BESS_VSC [topology]
  • A very low-inertia system, 6 synchronous machines are replaced by 6 type-III wind power plants, noted as Config. III [topology]

Along with the provided dynamic models, we also upload a report where the dynamic models and the corresponding simulation results are presented in details.

Files

Simulation notes

  • It is recommend to use Phasor Measurement Unit ( PMU) to measure phasor, frequency and ROCOF. In another project CS-TFM PMU model, we provide the PMU models that relie on Compressive Sensing Taylor-Fourier Model (CS-TFM) approach
  • It is worth to note that, due to the limitation of Syncrhonous Machine block in discrete system in MATLAB/Simulink, it is necessary to use a small parasitic resistive load, connected at the machine terminals, to avoid numerical oscillations. Details regarding how to use parasitic resistive load,see in Mathwork.

Real-time simulator

We use the Opal-RT real-time digital simulator OP5600, coupled with the eMEGAsim PowerGrid running on the RT-LAB real-time simulation platform. For installation, user guide and more information on the real-time simulator go here.

Software

The following software is required to run the model:

  • MATLAB Version 8.5.1 (R2015aSP1)
  • Simulink Version 8.5.1 (R2015aSP1)
  • ARTEMIS Blockset Version 7.2.2.1206 (R2015a)
  • RT-LAB Version v11.2.2.108 (R2015a.x), available here

References

For a more detailed description of this full-replica IEEE 39-bus system model, refer to the following references:

  • Yihui Zuo, Mario Paolone, Fabrizio Sossan, Effect of voltage source converters with electrochemical storage systems on dynamics of reduced-inertia bulk power grids, Electric Power Systems Research, Volume 189, 2020. Available here
  • Yihui Zuo, Guglielmo Frigo, Asja Derviškadić and Mario Paolone, "Impact of Synchrophasor Estimation Algorithms in ROCOF-based Under-Frequency Load-Shedding," in IEEE Transactions on Power Systems. Available here.
  • Yihui Zuo, Fabrizio Sossan, Mokhtar Bozorg, Mario Paolone, “Dispatch and Primary Frequency Control with Electrochemical Storage: a System-wise Verification,” IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe), 2018. Available here.
  • Asja Derviškadić, Yihui Zuo, Guglielmo Frigo, Mario Paolone, “Under Frequency Load Shedding based on PMU Estimates of Frequency and ROCOF,” IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe), 2018. Available here.
  • Guglielmo Frigo, Asja Derviškadić, Yihui Zuo and Mario Paolone, "PMU-Based ROCOF Measurements: Uncertainty Limits and Metrological Significance in Power System Applications," in IEEE Transactions on Instrumentation and Measurement. Available here.