diff --git a/public/scripts/vps-installation/README.md b/public/scripts/vps-installation/README.md
new file mode 100644
index 00000000..28ca4482
--- /dev/null
+++ b/public/scripts/vps-installation/README.md
@@ -0,0 +1,158 @@
+# 🚀 Beam Subnet-EVM Node Setup
+
+This guide walks you through setting up an AvalancheGo node and configuring it to track the **Beam L1 Subnet** using Beam's **Subnet-EVM**.
+
+Tested on: **Ubuntu 22.04 / 24.04 LTS**
+
+---
+
+## 📁 Contents
+
+- [1. Overview](#1-overview)
+- [2. Prerequisites](#2-prerequisites)
+- [3. Installation](#3-step-by-step-installation)
+  - [3.1 Configure the Node](#31-configure-the-node)
+  - [3.2 Apply Beam Network Upgrades](#32-apply-beam-network-upgrades)
+  - [3.3 Restart Node and Verify](#33-restart-node-and-verify)
+- [4. Node Monitoring](#4-node-monitoring)
+- [5. Notes](#5-notes)
+
+---
+
+## 1. Overview
+
+This repo provides two automated Bash scripts to:
+
+1. Install the [AvalancheGo](https://github.com/ava-labs/avalanchego) validator node.
+2. Configure the node to track the [Beam Subnet](https://buildonbeam.com/) and apply its upgrade rules.
+
+---
+
+## 2. Prerequisites
+
+- A clean Ubuntu 22.04 or 24.04 server (cloud or on-prem)
+- Root or sudo access
+- An open port (default `9651`) and optionally exposing it publicly
+
+---
+
+## 3. Installation
+
+---
+
+Run the following script to install AvalancheGo:
+
+```bash
+bash vps-setup-beam-validator.sh
+```
+
+This script will:
+
+- Update system
+- Install required packages: `wget`, `tar`, `jq`
+- Prompt you to choose connection type, public IP, and RPC exposure
+- Allow you to enable **State Sync** for faster sync times
+- Install AvalancheGo as a systemd service
+- Download and install Subnet-EVM v0.7.3
+- Place it into the AvalancheGo plugin directory with the proper VMID
+- Print success confirmation and paths
+- Show your NodeID at the end
+
+Example prompts:
+- IP auto-detection and override
+- Private vs. public RPC
+- State sync: enabled or full archive
+
+After install, the node will be running in the background.
+
+---
+
+## 3.1 Configure the Node
+
+The script will also update your AvalancheGo config at:
+
+```bash
+~/.avalanchego/configs/node.json
+```
+
+It adds:
+
+```json
+{
+  "track-subnets": "eYwmVU67LmSfZb1RwqCMhBYkFyG8ftxn6jAwqzFmxC9STBWLC",
+  "partial-sync-primary-network": true
+}
+```
+
+This ensures your node tracks only the Beam subnet and performs a partial sync to save resources.
+
+---
+
+## 3.2 Apply Beam Network Upgrades
+
+The script will create the following chain config directory:
+
+```bash
+~/.avalanchego/configs/chains/2tmrrBo1Lgt1mzzvPSFt73kkQKFas5d1AP88tv9cicwoFp8BSn/
+```
+
+And download the Beam subnet upgrade file:
+
+```bash
+upgrade.json
+```
+
+This contains necessary configuration rules for proper syncing and upgrades.
+
+---
+
+## 3.3 Restart Node and Verify
+
+The script will restart the AvalancheGo node and display its status:
+
+```bash
+sudo systemctl restart avalanchego
+sudo systemctl status avalanchego
+```
+
+It will also extract your **NodeID** from the logs:
+
+```bash
+🔎 Your NodeID is: NodeID-XXXX...
+```
+
+This ID is essential for staking and network registration.
+
+---
+
+## 4. Node Monitoring
+
+Follow logs in real time:
+
+```bash
+sudo journalctl -u avalanchego -f
+```
+
+Or just to check status:
+
+```bash
+sudo systemctl status avalanchego
+```
+
+---
+
+## 5. Notes
+
+- Always use the latest [Subnet-EVM release](https://github.com/ava-labs/subnet-evm/releases) compatible with Beam.
+- VMID and BlockchainID are predefined and specific to Beam:
+  - **VMID**: `kLPs8zGsTVZ28DhP1VefPCFbCgS7o5bDNez8JUxPVw9E6Ubbz`
+  - **BlockchainID**: `2tmrrBo1Lgt1mzzvPSFt73kkQKFas5d1AP88tv9cicwoFp8BSn`
+- If you modify the config path or structure, make sure to update the scripts accordingly.
+
+---
+
+## ✅ Done!
+
+You're now ready to operate a Beam L1 node and contribute to its decentralized infrastructure.
+
+Happy validating 🚀
diff --git a/public/scripts/vps-installation/vps-setup-beam-validator.sh b/public/scripts/vps-installation/vps-setup-beam-validator.sh
new file mode 100644
index 00000000..5e2aa687
--- /dev/null
+++ b/public/scripts/vps-installation/vps-setup-beam-validator.sh
@@ -0,0 +1,192 @@
+#!/bin/bash
+
+# ---------------------------------------
+# Beam Validator Node Installer Script
+# Ubuntu 22.04 / 24.04 LTS
+# ---------------------------------------
+# Downloads and runs the official AvalancheGo installer
+# Includes prompts for network, IP, RPC settings, state sync
+# Ends with clear post-install steps and service info
+# Installs Beam's Subnet-EVM binary for AvalancheGo
+# Configures node to track the Beam subnet
+# Applies upgrade rules and restarts AvalancheGo
+# Displays the NodeID for staking and monitoring
+# ---------------------------------------
+
+set -e  # Exit on any error
+
+# Update system packages
+echo "🔄 Updating system packages..."
+sudo apt update -y && sudo apt upgrade -y
+
+# Install prerequisites
+echo "🔧 Installing required packages..."
+sudo apt install -y wget tar jq
+
+# Download AvalancheGo installer
+echo "⬇️ Downloading AvalancheGo installer..."
+wget -nd -m https://raw.githubusercontent.com/ava-labs/avalanche-docs/master/scripts/avalanchego-installer.sh
+
+# Set execute permissions
+echo "🔐 Setting executable permissions..."
+chmod 755 avalanchego-installer.sh
+
+# Display pre-install instructions
+cat <<EOF
+
+🚀 Starting AvalancheGo installation...
+
+You will be prompted for the following inputs:
+
+1️⃣  🔌 Connection Type:
+     - [1] Residential (Dynamic IP)
+     - [2] Cloud (Static IP)
+
+2️⃣  🌐 Public IP:
+     - Confirms detected public IP or allows manual entry.
+
+3️⃣  🔓 RPC Port Exposure:
+     - [private]: Local access only (recommended for validators)
+     - [public]: Open to all interfaces (required for public API nodes)
+
+⚠️ If choosing 'public', you must secure your RPC port via firewall rules
+   to restrict access to trusted IPs. Leaving it open is a serious risk.
+
+4️⃣  ⚡ State Sync:
+     - [on]: Fast sync with current state (great for validators)
+     - [off]: Full archive node with history (needed for analytics or archival needs)
+
+EOF
+
+# Wait a moment before continuing
+sleep 6
+
+# Run the interactive installer
+./avalanchego-installer.sh
+
+# Post-installation
+cat <<EOF
+
+✅ AvalancheGo installation complete.
+--------------------------------------
+
+🔧 The node is now running in the background as a systemd service.
+
+Proceeding to install Beam Network...
+
+EOF
+
+# Start the Beam Network installation
+
+# Constants
+PLUGIN_DIR="$HOME/.avalanchego/plugins"
+SUBNET_EVM_VERSION="0.7.3"
+SUBNET_EVM_URL="https://github.com/ava-labs/subnet-evm/releases/download/v${SUBNET_EVM_VERSION}/subnet-evm_${SUBNET_EVM_VERSION}_linux_amd64.tar.gz"
+VM_ID="kLPs8zGsTVZ28DhP1VefPCFbCgS7o5bDNez8JUxPVw9E6Ubbz"
+BLOCKCHAIN_ID="2tmrrBo1Lgt1mzzvPSFt73kkQKFas5d1AP88tv9cicwoFp8BSn"
+UPGRADE_URL="https://raw.githubusercontent.com/BuildOnBeam/beam-subnet/main/subnets/beam-mainnet/upgrade.json"
+
+# Step 1: Download and install Subnet-EVM
+echo ""
+echo "⬇️ Downloading Subnet-EVM v${SUBNET_EVM_VERSION}..."
+mkdir -p subnetevm && cd subnetevm
+wget -O subnet-evm.tar.gz "$SUBNET_EVM_URL"
+tar -xvzf subnet-evm.tar.gz
+
+echo "📁 Moving Subnet-EVM to plugins directory..."
+mkdir -p "$PLUGIN_DIR"
+cp subnet-evm "$PLUGIN_DIR/$VM_ID"
+
+echo "✅ Subnet-EVM installed at: $PLUGIN_DIR/$VM_ID"
+cd ..
+
+# Step 2: Update AvalancheGo node config
+echo ""
+echo "🛠️  Configuring AvalancheGo to track the Beam subnet..."
+
+NODE_CONFIG="$HOME/.avalanchego/configs/node.json"
+mkdir -p "$(dirname "$NODE_CONFIG")"
+
+if [[ -f "$NODE_CONFIG" ]]; then
+  jq '. + {
+    "track-subnets": "eYwmVU67LmSfZb1RwqCMhBYkFyG8ftxn6jAwqzFmxC9STBWLC",
+    "partial-sync-primary-network": true
+  }' "$NODE_CONFIG" > temp_node.json && mv temp_node.json "$NODE_CONFIG"
+else
+  cat <<EOF > "$NODE_CONFIG"
+{
+  "track-subnets": "eYwmVU67LmSfZb1RwqCMhBYkFyG8ftxn6jAwqzFmxC9STBWLC",
+  "partial-sync-primary-network": true
+}
+EOF
+fi
+
+echo "✅ Node config updated: $NODE_CONFIG"
+
+# Step 3: Apply network upgrades
+echo ""
+echo "🔧 Applying Beam subnet upgrade rules..."
+
+CHAIN_CONFIG_DIR="$HOME/.avalanchego/configs/chains/$BLOCKCHAIN_ID"
+mkdir -p "$CHAIN_CONFIG_DIR"
+cd "$CHAIN_CONFIG_DIR"
+
+wget -O upgrade.json "$UPGRADE_URL"
+
+if [[ -f "upgrade.json" ]]; then
+  echo "✅ upgrade.json downloaded successfully."
+else
+  echo "❌ Failed to download upgrade.json"
+  exit 1
+fi
+
+cd ~
+
+# Step 4: Restart AvalancheGo to apply all changes
+echo ""
+echo "🔄 Restarting AvalancheGo node service..."
+sudo systemctl restart avalanchego
+sleep 3
+sudo systemctl status avalanchego --no-pager
+
+# Step 5: Extract and display NodeID
+echo ""
+echo "🔎 Extracting NodeID from logs..."
+
+NODE_ID=$(sudo journalctl -u avalanchego | grep -oP '"nodeID":\s*"(NodeID-[a-zA-Z0-9]+)"' | tail -n1 | grep -oP 'NodeID-[a-zA-Z0-9]+')
+
+if [[ -n "$NODE_ID" ]]; then
+  echo ""
+  echo "✅ Your NodeID is:"
+  echo ""
+  echo "    🆔  $NODE_ID"
+  echo ""
+  echo "💡 Save this NodeID — it's required for staking and node monitoring."
+else
+  echo "⚠️  Could not extract NodeID from logs. Try manually with:"
+  echo "    sudo journalctl -u avalanchego | grep 'nodeID'"
+fi
+
+# Wrap-up message
+cat <<EOF
+
+✅ Beam Validator Node installation complete!
+-----------------------------------------
+
+🟢 To check the service status:
+  sudo systemctl status avalanchego
+  (Press 'q' to exit)
+
+📄 Config paths:
+  - Node config:     /home/ubuntu/.avalanchego/configs/node.json
+  - C-Chain config:  /home/ubuntu/.avalanchego/configs/chains/C/config.json
+  - Plugins:         /home/ubuntu/.avalanchego/plugins
+
+🔌 Subnet-EVM plugin installed:      $PLUGIN_DIR/$VM_ID
+🧩 Node config file:                $NODE_CONFIG
+📈 Upgrade config path:             $CHAIN_CONFIG_DIR/upgrade.json
+
+📡 To monitor real-time logs:
+  sudo journalctl -u avalanchego -f
+
+EOF
\ No newline at end of file