BlueSCSI and Atari ST ICD Hostadapter ...

[franklukas]

----------- bluescsi.ini ----
[SCSI]
System=Generic
EnableSCSI2=0 ; Off
EnableParity=1 ; On
Debug=1 ; On
--------------- or alternativ ---
[SCSI]
System=MegaSTE
MapLunsToIDs=1 ; On
EnableParity=0 ; Off
Debug=1 ; On

... with both ini files the BlueSCSI do not work with any ICD Atari ACSI/SCSI Hostadapter. Hard drives larger than 1GB, e.g. 9GB or 18GB hard drives, work on an ICD Host adapter. Parity is supported.

On the same Host adapter a ZULU works perfectly and without problems. The ZULU works without any config file (ini) only with the HD image on the SD card.

If the Atari Computer has a real SCSI Controller like a Falcon or Atari TT there are no problems ...

You can not use any ID or LUN ...