Knee.any

// Exercise template for the advanced joint modeling course

Main = {

  // The actual body model goes in this folder
  AnyFolder MyModel = {
    AnyVar MyParameter = DesignVar(0);

    // Global Reference Frame
    AnyFixedRefFrame GlobalRef = {

      // Todo: Add points for grounding of the model here

    };  // Global reference frame
    
    AnySeg Femur = {
      Mass = 5;
      Jii = {1,0.04,1}*0.05;
      AnyRefNode Hip = {
        sRel = {0, 0.2, 0};
      };
      AnyRefNode Knee = {
        sRel = {0, -0.3, 0};
        ARel = RotMat(pi,y);
      };
      AnyRefNode QuadOri = {
        sRel = {0.05, 0, 0};
      };
      AnyRefNode CondyleOri = {
        sRel = {0, -0.27, 0};
        ARel = RotMat(-20*pi/180,z);
        AnyDrawRefFrame drw = {
          ScaleXYZ = {1,1,1}*0.1;
          RGB = {1,0,0};
        };
        AnyRefNode Focus1 = {
          sRel = {0,0.03,0};
        };
        AnyRefNode Focus2 = {
          sRel = {0,-0.03,0};
        };
        AnyDrawNodes drwn = {
          RGB = {1,0,0};
          ScaleXYZ = {1,1,1}*0.01;
        };
      };
      AnyDrawSeg drw = {
        Opacity = 0.5;
      };
      Axes0 = RotMat(pi/2,z);
    };
    AnySeg Tibia = {
      r0 = {0.3, -0.25, 0};
      Mass = 3;
      Jii = {1,0.03,1}*0.03;
      AnyRefNode Knee = {
        sRel = {0, 0.18, 0};
        ARel = RotMat(pi,y);
      };
      AnyRefNode Ankle = {
        sRel = {0, -0.25, 0};
      };
//      AnyRefNode Patella1 = {
//        sRel = .Knee.sRel + {0.07, 0.05, 0};
//      };
      AnyRefNode Patella2 = {
        sRel = .Knee.sRel + {0.02, -0.06, 0};
      };
      AnyDrawSeg drw = {
        Opacity = 0.5;
      };
    };
    AnySeg Patella = {
      r0 = {0.33, 0.0, 0};
      Mass = 0.02;
      Jii = {1,0.5,1}*0.00001;
      AnyRefNode Knee = {
        sRel = {-0.06, 0, 0};
      };
      AnyRefNode Lig = {
        sRel = {0, -0.03, 0};
      };
      AnyRefNode Quad = {
        sRel = {0, 0.025, 0};
      };
      AnyRefNode Surf1 = {
        sRel = {-0.02, 0.02, 0};
      };
      AnyRefNode Surf2 = {
        sRel = {-0.02, -0.02, 0};
      };
      AnyDrawSeg drw = {};
    };
    AnyRevoluteJoint Hip = {
      AnyRefFrame &Ground = .GlobalRef;
      AnyRefFrame &Femur = .Femur.Hip;
    };
//    AnyRevoluteJoint FemurPatella = {
//      AnyRefFrame &Femur = .Femur.Knee;
//      AnyRefFrame &Patella = .Patella.Knee;
//    };
    AnyKinEqSimpleDriver PatellaLigament = {
      AnyKinPLine lin = {
        AnyRefFrame &origin = ..Patella.Lig;
        AnyRefFrame &insertion = ..Tibia.Patella2;
        AnyDrawPLine drw = {
          Thickness = 0.01;
          RGB = {1,0,0};
        };
      };
      DriverPos = {0.06};
      DriverVel = {0};
    };
    
    AnyKinPLine EllipsDist1 = {
      AnyRefFrame &f1 = Main.MyModel.Femur.CondyleOri.Focus1;
      AnyRefFrame &f2 = Main.MyModel.Patella.Surf1;
      AnyRefFrame &f3 = Main.MyModel.Femur.CondyleOri.Focus2;
      AnyDrawPLine drw = {
        Thickness = 0.005;
        RGB = {0,0,1};
      };
    };
    AnyKinPLine EllipsDist2 = {
      AnyRefFrame &f1 = Main.MyModel.Femur.CondyleOri.Focus1;
      AnyRefFrame &f2 = Main.MyModel.Patella.Surf2;
      AnyRefFrame &f3 = Main.MyModel.Femur.CondyleOri.Focus2;
      AnyDrawPLine drw = {
        Thickness = 0.005;
        RGB = {0,0,1};
      };
    };
    
    // Constrain the patella to the xy-plane of the knee node.
    AnyKinEq PatellaPlaner = {
      AnyKinLinear lin1 = {
        AnyRefFrame &knee = Main.MyModel.Femur.Knee;
        AnyRefFrame &point = Main.MyModel.Patella.Knee;
        Ref = 0;
      };
      AnyKinLinear lin2 = {
        AnyRefFrame &knee = Main.MyModel.Femur.Knee;
        AnyRefFrame &point = Main.MyModel.Patella.Lig;
        Ref = 0;
      };
      AnyKinLinear lin3 = {
        AnyRefFrame &knee = Main.MyModel.Femur.Knee;
        AnyRefFrame &point = Main.MyModel.Patella.Quad;
        Ref = 0;
      };
      MeasureOrganizer = {2,5,8};
    };      
    
    AnyKinEqSimpleDriver PatellaFemur = {
      AnyKinMeasure &L1 = Main.MyModel.EllipsDist1;
      AnyKinMeasure &L2 = Main.MyModel.EllipsDist2;
      DriverVel = {0,0};
      DriverPos = {0.13, 0.13};
    };
    
    AnyKinEqSimpleDriver HipAngle = {
      AnyKinMeasure &jnt = .Hip;
      DriverPos = {pi/2};
      DriverVel = {0};
    };
    AnyRevoluteJoint Knee = {
      AnyRefFrame &Femur = .Femur.Knee;
      AnyRefFrame &Tibia = .Tibia.Knee;
    };
//    AnyKinEqFourierDriver KneeAngle = {
//      AnyKinMeasure &jnt = .Knee;
//      DriverPos = {0};
//      DriverVel = {pi/2};
//      Reaction.Type ={Off};
//    };
//    AnyKinEqFourierDriver KneeAngle = {
//      AnyKinMeasure &jnt = .Knee;
//      Type = Sin;
//      Freq = 0.5;
//      A = {{0,90}}*pi/180;
//      B = {{0,0}}*pi/180;
//      Reaction.Type ={Off};
//    };
    AnyKinEqInterPolDriver KneeAngle = {
      Type = Bspline ;
      BsplineOrder  =5;
      T = 2*{0, 0.2, 0.4, 0.6, 0.8, 1.0,1.2};
      Data = {{90.1,90, 30, 0, 30, 90,90.1}}*pi/180;
      AnyKinMeasure &jnt = .Knee;
      Reaction.Type ={Off};
    };

AnyMuscleViaPoint Quadriceps = {
      AnyMuscleModel Model = {
        F0 = 1000;
      };
      AnyRefFrame &origin = .Femur.QuadOri;
      AnyRefFrame &insertion = .Patella.Quad;
      AnyDrawMuscle drw = {};
    };

        
  }; // MyModel

  #ifndef N_STEP
  #define N_STEP 100
  #endif
  
  // The study: Operations to be performed on the model
  AnyBodyStudy MyStudy = {
    AnyFolder &kneeref = .MyModel.Knee;
    AnyFolder &Model = .MyModel;
    Gravity = {0.0, -9.81, 0.0};
    
    nStep = N_STEP ;
    tEnd = 2.4;
    AnyVar MomentArm = Main.MyModel.Quadriceps.LmtDot/(Main.MyModel.Knee.Vel[0]+1.0e-10);
    
    #ifdef CREATE_OUTPUT_FILE 
    AnyOutputFile FileOutput = 
    {
       ConstSectionSaveOptionsOnOff = Off;
       FileName = "TestOutput.csv";
       AnyStringVar ConstName = "HelloWorld";
       Values = {
          &.nStep,
          &.MomentArm,
          &Main.MyModel.Femur.Knee.sRel
       };
    
    };
    #endif
    
    
  };

};  // Main