BoardConfig.mk

#
# Copyright 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This contains the module build definitions for the hardware-specific
# components for this device.
#
# As much as possible, those components should be built unconditionally,
# with device-specific names to avoid collisions, to avoid device-specific
# bitrot and build breakages. Building a component unconditionally does
# *not* include it on all devices, so it is safe even with hardware-specific
# components.
#Copyright (C) 2018 OrangeFox Recovery Project
#Copyright (C) 2018 PitchBlack Recovery Project


DEVICE_PATH := device/xiaomi/chiron

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := cortex-a73

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv8-a
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a73

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := msm8998
TARGET_NO_BOOTLOADER := true

# Kernel
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_TAGS_OFFSET := 0x00000100
BOARD_RAMDISK_OFFSET := 0x01000000

BOARD_KERNEL_CMDLINE := androidboot.console=ttyMSM0 androidboot.hardware=qcom
BOARD_KERNEL_CMDLINE += user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3
BOARD_KERNEL_CMDLINE += service_locator.enable=1
BOARD_KERNEL_CMDLINE += swiotlb=2048
BOARD_KERNEL_CMDLINE += androidboot.usbcontroller=a800000.dwc3
BOARD_KERNEL_CMDLINE += androidboot.configfs=true
BOARD_KERNEL_CMDLINE += firmware_class.path=/vendor/firmware_mnt/image loop.max_part=7
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive

# DJ9
ifeq ($(FOX_BUILD_FULL_KERNEL_SOURCES),1)
TARGET_KERNEL_CONFIG := chiron_defconfig
TARGET_KERNEL_SOURCE := kernel/xiaomi/chiron
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
export CROSS_COMPILE_ARM32="arm-linux-androideabi-"
else
TARGET_PREBUILT_KERNEL := $(DEVICE_PATH)/prebuilt/Image.gz-dtb
PRODUCT_COPY_FILES += \
    $(TARGET_PREBUILT_KERNEL):kernel
endif
# DJ9

# Platform
TARGET_BOARD_PLATFORM := msm8998
TARGET_BOARD_PLATFORM_GPU := qcom-adreno540

# Encryption
PLATFORM_SECURITY_PATCH := 2025-12-31

# Partitions
BOARD_FLASH_BLOCK_SIZE := 262144 # (BOARD_KERNEL_PAGESIZE * 64)

BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_CACHEIMAGE_PARTITION_SIZE := 402653184
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 5368709120
BOARD_USERDATAIMAGE_PARTITION_SIZE := 120426835968
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4

# --------------------------------------
# TWRP recovery specific setting - start
# --------------------------------------

#RECOVERY_VARIANT := twrp
TW_THEME := portrait_hdpi
TARGET_RECOVERY_QCOM_RTC_FIX := true

# TWRP Debugging
#TWRP_EVENT_LOGGING := true
#TARGET_USES_LOGD := true
#TWRP_INCLUDE_LOGCAT := true
#TARGET_RECOVERY_DEVICE_MODULES += strace
#TW_RECOVERY_ADDITIONAL_RELINK_FILES += $($(TARGET_OUT_OPTIONAL_EXECUTABLES)/strace
#TW_CRYPTO_SYSTEM_VOLD_DEBUG := true
#TW_CRYPTO_SYSTEM_VOLD_DISABLE_TIMEOUT := true

# Bootloader
#TARGET_BOOTLOADER_BOARD_NAME := msm8998
#TARGET_NO_BOOTLOADER := true
TARGET_USES_UEFI := true

# Encryption
TW_INCLUDE_CRYPTO := true

# legacy hardware crypto used until 2018-04-20 by OmniROM/LineageOS/ResurrectionRemix/AOSP/AICP based ROMS
#TARGET_CRYPTFS_HW_PATH := vendor/qcom/opensource/cryptfs_hw
#TW_CRYPTO_USE_SYSTEM_VOLD := qseecomd
#TARGET_KEYMASTER_WAIT_FOR_QSEE := true
# enable/disable Qualcomm hardware encryption
#TARGET_HW_DISK_ENCRYPTION := true

# Recovery
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_HAS_LARGE_FILESYSTEM := true
BOARD_HAS_NO_SELECT_BUTTON := true
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"
TW_HAS_EDL_MODE := true

# Workaround for error copying vendor files to recovery ramdisk
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_COPY_OUT_VENDOR := vendor

# additional filesystem support
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true
TW_INCLUDE_NTFS_3G := true
TW_INCLUDE_FUSE_NTFS := true
TW_NO_EXFAT := false
TW_NO_EXFAT_FUSE := false
TW_INCLUDE_FUSE_EXFAT := true
BOARD_SUPPRESS_SECURE_ERASE := true
TW_IGNORE_MISC_WIPE_DATA := true

# Other TWRP Configuration
BOARD_HAS_NO_REAL_SDCARD := true
RECOVERY_SDCARD_ON_DATA := true
TW_EXCLUDE_DEFAULT_USB_INIT := true
TW_SCREEN_BLANK_ON_BOOT := true
TW_EXTRA_LANGUAGES := true
TW_DEFAULT_LANGUAGE := en
TW_EXCLUDE_SUPERSU := true

# Disable Mouse Cursor
TW_INPUT_BLACKLIST := "hbtp_vm"

# Display Brightness
TW_DEFAULT_BRIGHTNESS := 2047
TW_MAX_BRIGHTNESS := 4095
TW_BRIGHTNESS_PATH := "/sys/class/leds/lcd-backlight/brightness"

# Use ro.product.model - backup folder is named like model not like serial number (default)
# TW_USE_MODEL_HARDWARE_ID_FOR_DEVICE_ID := true

ALLOW_MISSING_DEPENDENCIES := true

# Workaround for error copying vendor files to recovery ramdisk
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
TARGET_COPY_OUT_VENDOR := vendor

# --------------------------------------
# TWRP recovery specific setting - end
# --------------------------------------