why is my speed unit in s/it insted of it/s?

[Ethan-Ming]

90% of the time i seen people talking about speed is in it/s
but why is my a1111 giving me s/it?

by the way does 1.6s/it sounds normal for 3060?
SDE Karras, 3 batch, 512x512, 50 steps

[Justanetizen]

The console output will show s/it if your iteration speed is over 1 second for each iteration. It will automatically convert to it/s if your iterations per second go below 1 a second

[CaneRandagio1983]

@Justanetizen I have 9.63 s/it, I'm using CPU.
It is right say it do 1/9 it/s, so it do 0.11 it/s?
Thanks

[toshioson]

FYI, my clocked-down RX580 running at 820MHz has some 5.2-5.4 s/it for genration size of 512 x 512.

[caseydwayne]

Dang, really? I've been working my butt off to get my 2x RX 570s working in SD but my CPU does better than that...

[OrloDavid]

Thought I'd add this here, I'm digging to find what speeds could be expected for various video cards using the default settings and high res images. I'm really curious how the headless server cards perform in a lightening port dock for a laptop. I don't think the limited bus will be a determining factor for the lower range cards and this type use case.

• SD Wb Openvino branch
• Default Settings, 512x512, 20 steps, DPM ++ Karras
• Core i9 12900H / Iris XE dGPU
• Intel CPU No OpenVino 6.48s/it
• Intel CPU With OpenVino 3.74s/it
• Intel GPU With OpenVino 1.76s/it

Openvino doesn't work for me once my output image resolution goes above 1024x1024. I can run HD images at 1920x1080 without Openvino just fine, it's just REALLLLLLLLLYYYYYY SLLLLOOOOOWWWWWW.

• SD Wb Openvino branch
• HD Images 1920x1080
• Intel CPU No OpenVino (100-200) s/it