def_chalard_fad9.tidal

-- revu 15 5 ok!
-- revu 22 5 fini!
-- fev 23 revu
clutchIn 1 18 $ silence

-- encours 1106
-- fayadub
d1 $
  -- xfadeIn 1 12 $
  every 6
  ((# verbwet 0) . (# verbgain 1)) $
    stack[
      listen (cF 1 "23") $
      degOffsetBy (1/8) (cF 0 "33") $
      foldEvery [5,8] (listen 0) $
      whenmod "6.5 7" "<5 5.5>" ((slow "<2 1>" . compress (1/6, 1/3) . (# legato 2))) $
      (<| amp "0.5 <~ ~@2> [0.3 0.5] <[~ 0.5] 0.5>") $
      s "Sd_kickRingz"
        -- # amp 0.5
        # begin 0.0
        # end 1.0
        # speed 0.08
        # accelerate 0
        # sustain 1.0
        # freq "24 133 240.0"
        # attack 0.0
        # release 1.2000000476837
        # envPow 1.0
        # clickCurve "-4.0"
        # clickInScale 1.0
        # clickEnvPow 1.0
        # clickHpf 180.0
        # clickHpRq 0.9
        # clickLpf 13000.0
        # clickLpRq 0.03
        # clickAmp 0.57
        # envL1 0.10000000149012
        # envL2 1.2000000476837
        # envL3 3.0
        # envL4 2.0999999046326
        # envL5 0.10000000149012
        # envT1 0.010000000149012
        # envT2 0.020000000298023
        # envT3 0.0
        # envT4 0.10000000149012
        # curve "-4.0"
        # envpL1 0.010000000149012
        # envpL2 21.2000000476837
        # envpL3 4
        # envpL4 2.0999999046326
        # envpT1 0.010000000149012
        # envpT2 0.0
        # envpT3 1.2000000476837
        # curvep "-12.0"
        # dcy 0.35
        # ffreq 900.0
        # legato (slow 2 "<0.4 1.5>")
        # hpf 70
        # gain 0.94
      ,
      listen 1 $
      listen (cF 1 "24") $
      degOffsetBy (1/8) (cF 0 "34") $
      every 5 (listen 0) $
      -- whenmod "8 7" "7 5" (listen 0 ) $
      every 2 ("<0.25 -0.5>" <~) $
      (<| t1harmonic "<3.4 ~> <~ [~ 4.1]> ~ 10.57 ")  $
      s "Sd_kickBlocks"
        # amp 0.3 -- 0.20000000298023
        # begin 0.0
        # end 1.0
        # speed 1.0
        # accelerate 0.0
        # sustain 1.0
        # freq  1.0
        # t1freq 300 -- 400.0
        # t1harmonic 2.0
        # t1glide 0.0099999997764826
        # t1att 0.00050000002374873
        # t1rel 0.0099999997764826
        # t1curve "-4.0"
        # t1del 0.0
        # t1amp 1.0
        # t2freq 70 -- 50.0
        # t2harmonic 3.4400000572205
        # t2glide 0.0099999997764826
        # t2att 9.9999997473788e-05
        # t2rel 0.30000001192093
        # t2curve "-4.0"
        # t2del 0.0049999998882413
        # t2amp 1.0
        # h1freq 60 -- 100.0
        # h1harmonic 8.0
        # h1glide 0.0099999997764826
        # h1rq 0.60000002384186
        # h1att 0.0010000000474975
        # h1rel 0.019999999552965
        # h1curve "-8" -- "-4.0"
        # h1del 0.0010000000474975
        # h1amp 1.0
        # h2freq 1320.0
        # h2harmonic 1.0
        # h2glide 0.0
        # h2att 0.003000000026077
        # h2rel 0.029999999329448
        # h2curve "-4.0"
        # h2del 0.0
        # h2amp 0.75 -- 0.5
        # cfreq 600 -- 6100.0
        # crq 0.1 -- 1.0
        # camp 1.4099999666214
        # cdur 0.1 -- 0.0010000000474975
        -- # gain 0.76
      ,
      -- whenmod 8 6 (listen 0) $
      stack [
        listen (cF 1 "25") $
        degOffsetBy (3/8) (cF 0 "35") $
        -- hurry 0.7 $
        whenmod 8 6 (listen 0) $
        -- fast "3 2" $
        (<| amp (slow 4 $ "[~ 0.12] ! ~ " * 1.4)) $
        -- (<| amp (slow 4 $ "[~ 0.12] ! ~ <0.1 [~ 0.03 0.12]>" * 1.4)) $
        s "Sd_hoover"
          -- # amp 0.20000000298023
          # attack 0.7 -- 0.0021 -- (0.021 * (rangex 0.125 1.23 $ slow 3 cosine)) --  0.0010000000474975
          # sustain 2 -- (1 * (smooth $ range 0.125 2 tri))
          # release 3 -- (1.82 * (slow 2 sine))
          -- # accelerate sine
          # curve "-4.0"
          # envPow 1.0
          # freq 230.0
          # envfL1 0
          # envfL2 0.3 -- (sometimesBy 0.64 (|- 2) $ 3.0)
          # envfL3 0
          # envfT1 0.2
          # envfT2 0.6 -- 1.7000000476837
          # crvf1 "-10.0"
          # crvf2 "-14.0"
          -- # bw (sometimesBy 0.43 (|- choose [0.9, 0.86, 0.23]) $ 1.0349999666214)
          # bw 85
        ,
        listen (cF 1 "26") $
        degOffsetBy (1/6) (cF 0 "36") $
        whenmod "6.5 7" "<5 5.5>" ((slow "<1 2>" . compress (1/3, 1/6))) $
        (<| lfSrc1Rate (slow 2 $ "0.16 <0.051 ~> 0.02(2, 4, 1) ~" * 45)) $
        s "Sd_runglerDeter"
            # amp 0.3
            # begin 0.0
            # end 1.0
            # speed "1" -- 0.6
            # accelerate 0.80
            # freq 0.125 -- 20.0
            # attack (0.01 + (segment 10 $ slow 3.2 $ range 0.01 0.1 tri)) --  0.010000000474975
            # sustain 2.0
            # release 1.3999999761581
            # curve "-4.0"
            # envPow 1.0
            # lfSrc1Sel "<0.0!2 1>"
            -- # lfSrc1Rate 0.061269999998807907
            # lfSrc2Sel "3 4 <5 1>" -- "<1 0!2>"
            # lfSrc2Rate 16
            # switchSrcRate 4.9 --  10.40000000596046
            # ffreq "33 0.3"
            # legato 1.4
            # hpf 72
            # gain 0.97
        ]
        # zpulse 0.38
        # orbit 1
        -- # fmdistf (slow 5.1 $ range "1.4" 3.98 saw)
        # enc (slow 3.1 $ range 0.04 0.1 tri)
      ,
      listen 1 $
      listen (cF 1 "27") $
      degOffsetBy (1/4) (cF 0 "37") $
      whenmod 14 10 (listen 0) $
      whenmod 5 3 (|*| coarse "8 16") $
      almostNever (stripe 3) $
      every 8 (0.125 ~>) $
      every 7 (off 0.0625 (|+ speed 0.10) . slow 2) $
      every 4 (off 0.025 (|+ shape "0.1") . slow 2) $
      every "<3 2>" (|* speed "0.5 1 1.2") $
      every 3 (off 0.05 ((|+ coarse 0.12) . slow 2)) $
      (<| coarse (every 2 (rev) $ "0.7 ~ [~ 0.1] [<0 ~> 0.1]")) $
      s "ps:4 "
        # speed "<-0.5 0.75 0.5 0.61>!8"
        # bpf (segment 12 $ fast 3.2 $ range 1800 9800 tri)
        # gain 0.7
        # amdist 0.58
        # amdistf 420
        # pan (segment 4 $ ((slow 2 square + sine) / 2) )
        # cut "1 2 3 -1 3"
        # orbit 2
      ,
      listen 1 $
      listen (cF 1 "28") $
      degOffsetBy (1/8) (cF 0 "38") $
      foldEvery [8, 11] (listen 0) $
      slow "2 1.5" $
      -- slow "2 1.5" $
      someCyclesBy 0.6 (stutWith 3 0.125 ((# delay 0.6) . (# delaytime "0.05 0.1") . (# delayfeedback "0.4"))) $
      (<| amp "0.2 [~@2 0.23] ~ 0.2") $
      s "MC808Horiuchi_Sd"
        # attack 0.0
        # release 0.5
        # sustain 0.5
        # curve "-12.843224525452"
        # envPow 1.0
        # freq 251
        # fshift 0.68
        # fshiftnote (slow 5.1 $ range "-1.4" 0.98 saw)
        # fshiftphase (slow 3.1 $ range 0.04 0.1 tri)
        # pan (fast 2.5 tri)
        # hpf 500
        # gain 0.95
        # orbit 2
      ,
      listen 1 $
      listen (cF 1 "29") $
      degOffsetBy (3/8) (cF 0 "39") $
      every 5 (listen 0) $
      every 3 ((0.5) <~) $
      (<| curve (slow 2 $ "[-2 [~ -4] <-8 -1>]/<2 1>" * 2)) $
      s "danUk_Sd"
        # amp 0.30000001192093
        # attack 0.0
        # release 1.2999999523163
        # sustain 1.0
        -- # curve "-2.0"
        # envPow 1.0
        # globalEnvNoise 0.30000001192093
        # globalEnvInv 0.0
        # sawFreq "<24 ! ! 36>"
        # r 12
        # verbwet "<0.48 0.5>"
        # verbtime 1.2
        # verbdiff 1
        # verbgain 1.2
        # orbit 1
      ,
      listen 1 $
      listen (cF 1 "30") $
      degOffsetBy (5/8) (cF 0 "40") $
      every 2 (0.25 ~>) $
      (<| sin2Freq (slow 2 $ "<46 [~ 59]>")) $
      s "Sd_main"
        # amp 0.3 -- 0.20000000298023
        # begin 0.0
        # end 1.0
        # speed 1.0
        # att 0.1
        # dec 2
        # sus 2
        # rel 3
        # accelerate 0.0
        # sustain 1.0
        # lev 10.0
        # freq 50.0
        # wnoiseAmp 0 -- 1.0
        # sinAmp 1.0
        # sin1Freq 65 -- 30.0
        # envL1 1.9 -- 0.0
        # envL2 1.0
        # envL3 0.0099999997764826
        # envL4 1.2999999523163
        # envL5 0.0
        # envT1 0.3 -- 0.0099999997764826
        # envT2 0.93 -- 0.0
        # envT3 0.20000000298023
        # envT4 0.0099999997764826
        # clickCurve "-4.0"
        # clickInScale 1.0
        # clickEnvPow 1.0
        # clickHpf 80.0
        # clickHpRq 1.0
        # clickLpf 13000.0
        # clickLpRq 1.0
        # clickAmp 0 -- 1.0
        # sel 1.0
        -- # sin2Freq "<59 46 59 !>"
        # sin2Amp 1
        # noiseAmp 0 -- 1.0
        # hpffreq 8000.0
        # revtime 0.0
        # distAmt 0
        # distMix 0.1 -- 0.0
        # hpf 75
        -- # gain 0.7
  ]
    # enc 0
    -- # verbwet 0
    -- # verbgain 1
    -- # delay 0
    # cps 0.72
    |* gain 1.15


clutchIn 1 12 $ silence

-- 150523
-- ça grouve avec le pied marin
-- contoleur
d1 $
  -- clutchIn  1 10 $
  stack [
    -- éditer?
    -- listen 0 $
    listen "<1 1 1 0>" $
    listen (cF 1 "23") $
    degOffsetBy (1/7) (cF 0 "33") $
    sometimesBy 0.13 (listen 0) $
    ((2/14) ~>) $
    (<| amp "{0.6(<4 7>, <7 11>, 1)}%3.5") $
    s "Sd_kickmed"
      # begin 0.0
      # end 1.0
      # speed 1.0
      # accelerate 2
      # dec 0.028
      # sustain 0.358 -- 1.0
      # rel 0.027
      # freq 142.0
      # level 0.95
      # noise 1.0
      # dc 1
      # env0L1 0
      # env0L2 1.3
      # env0L3 0.4
      # env0L4 0
      # atkEnv0 0.199999997764826
      # decEnv0 0.20000000298023
      # relEnv0 0.25999999046326
      # fratio 1.23
      # env1L1 1
      # env1L2 1.4983
      # env1L3 0.3
      # env1T1 0.0001
      # env1T2 0.220000000298023
      # curve1 "-12.0"
      # curve2 "-2.0"
      # curve3 "4.0"
      # phase ((5/4) * pi)
      # oamp 0.10000000149012
      # owhich2 0
      # ochoose 3
      # hpf 120
      # lpf 200
    ,
    -- listen 0 $
    listen 1 $
    listen (cF 1 "24") $
    degOffsetBy (1/7) (cF 0 "34") $
    whenmod "9 7" "6 5" (listen 0) $
    slow 2 $
    juxBy 0.8 (<| freqGrow "1.5 2 0.5 ~ 0.25@2 ~") $
    s "cymnew1_Sd"
      # amp 0.20000000298023
      # attack 0.20
      # sustain 2.0
      # release 3.2000000476837
      # curve "-2.0"
      # envPow 1.0
      # envL1 0.0
      # envL2 1.0
      # envL3 0.40000000596046
      # envL4 0.0
      # envT1 0.11999999731779
      # envT2 0.019999999552965
      # envT3 0.23000000417233
      # tu 6.0
      # freqStart 40.0
      -- # freqGrow 1.0471975803375
      # hpf (slow 2.2 $ range 200 700 sine)
      # hpq (slow 3.3 $ range 0.1 0.35 saw)
      # orbit 1
    ,
    -- séquence?
    listen 1 $
    listen (cF 1 "25") $
    degOffsetBy (1/7) (cF 0 "35") $
    (<| sustain "~ [1.2 [0.21 0.25]*<2 1 0.5>]!2  [~ [0.2 0.5]*<0.5 2 1>]!2 2 ~") $
    s "hiSin_Sd"
      # gain 0.55
      # amp 1.0
      # attack 9.9999997473788e-05
      -- # sustain 1.0
      # release 1.2000000476837
      # curve "-4.0"
      # envL1 0.0
      # envL2 1.0
      # envL3 0.30000001192093
      # envL4 0.0
      # envT1 0.019999999552965
      # envT2 0.11999999731779
      # envT3 0.0099999997764826
      # envLev 15.0
      # envPow 1.0
      # envDivDur 1.0
      # theta 0.5
      # rho 0.80000001192093
      # a0 1.0
      # a1 0.0
      # a2 0.0
      # filterfreq 1000.0
      # rq 1.0
      # selectMod 0.0
      # sinFreq 12000.0
      # sinAmp 0.30000001192093
      # modFreq 0.20000000298023
      # pan (segment 14 $ fast 3.5 $ range 0 1 square )
      # lpf 9000
      # orbit 2
    ,
    -- sons en conflit avec Sd_kickmed?
    -- listen 0 $
    -- fast 2 $
    listen (cF 1 "26") $
    degOffsetBy (1/7) (cF 0 "36") $
    (<| amp ("0.64 ~ 0.64 0.66 ~ [~ 0.68 <[~ 0.66@3] 0.62> ~] <~ 0.45>" * 1)) $
    -- (<| amp ("0.64 ~ 0.64 0.8 ~ [~ 0.8 <[~ 0.8@3] 0.62> ~] <~ 0.45>" * 1)) $
    -- (<| amp "{~ 0.64 0.8 ~ [~ 0.8 <[~ 0.8@3] 0.62> ~]}%3.5") $
    s "Sd_sosKick"
      -- # amp 0.62
      # attack 0.01
      # release 0.9
      # begin 0.0
      # end 1.0
      # speed 1.0
      # accelerate 0.2 -- (someCyclesBy 0.6 (fast 3) $ "{[0.5 31] 5 [10 20] [3.5 30] [2 50]}%3") -- 112.0
      # sustain 1.0
      # freq 340
      # subamp 1.0
      # drumAmp 1.0
      # beaterAmp 0.019999999552965
      # clickAmp 1.0
      # startsubfreq 60.0
      # endsubfreq 32.0
      # linesubdur 0.079999998211861
      # subdecay 0.20000000298023
      # sublowpass 500.0
      # drumFreq 30.0
      # drumHarmonic 2.0
      # drumSweep 0.019999999552965
      # drumAtt 0.0049999998882413
      # drumRel 0.40000000596046
      # crv "<-4.0 4>"
      # drumFilter 1000.0
      # modIndex "12 [<22 32> 12] 6.5"
      # gain "1 [<0.94 0.88> 1] 1"
      # modFreq (fast "<2 3>" $ "<5.0 1>")
      # beaterFreq 500.0
      # beaterHarmonic (64.0 * (range 0.125 3 (tri * square )))
      # beaterSweep 1.29999999329448
      # noiseMod 500.0
      # beaterL1 0.0
      # beaterL2 1.0
      # beaterL3 2.4000000953674
      # beaterL4 0.0
      # beaterT1 0.0099999997764826
      # beaterT2 0.30000001192093
      # beaterT3 0.079999998211861
      # clkffreq 500.0
      # clkres 0.0
      # hpf 140
      # gain 0.97
      -- # sustain 1.0
    ,
    -- patrick ewing
    -- kick
   -- listen 1 $
   listen (cF 1 "27") $
   degOffsetBy (1/7) (cF 0 "37") $
   ((0.25) ~>) $
   (<| amp "1(3, 7)")
   $ s "Sd_stochadiet4"
     # attack 0.1
     # release 1.86
     # begin 0
     # end 1
     # speed 0.021
     # sustain 0.1
     # sdm 0.13
     # repeats 14.0
     # sinMod 260.0
     # gain 0.65
   ,
   -- clap
   listen (cF 1 "28") $
   degOffsetBy (1/7) (cF 0 "38") $
   (<| amp "[~@0.98 0.9@0.5 1(2, 3)]") $
   s "Sd_stochadiet5"
     # attack 0.021
     # release 0.08
     # begin 0
     # end 1
     # speed 1
     # sustain 1
     # filtSpeed 1
     # filtCenter 20
     # sdm 0.91
     # modFreq "<10.09 2>"
     # filtBw 14
     # gain 0.74
   ,
   -- noiseclap
   listen (cF 1 "29") $
   degOffsetBy (1/7) (cF 0 "39") $
     -- (<| amp "~@0.98 0.9@0.5 1(2, 3)")
   (<| amp "1(3, 7)") $
   s "Sd_stochadiet5"
     # attack 0.1
     # release 0.08 -- (smooth $ (0.16 * (range 0.5 4 $ slow (smooth $ "42 1") cosine)))
     # begin 0
     # end 1
     # speed 1
     # sustain 1
     # filtSpeed 1
     # filtCenter 20
     # sdm "<10.12 [100, 20.91]>"
     # modFreq "[10.09, 0.09]"
     # filtBw 12
     # gain 0.84
  ,
  listen (cF 1 "40") $
  degOffsetBy (1/7) (cF 0 "40") $
  -- sometimesBy 0.27 (listen 0) $
  -- (<| freq ("200 [~ 180] [200 150] 300@2 120 ~@2")) $
  (<| ifeedbk1 (someCyclesBy 0.32 (rot "-1 2 0") $ "<0.5 <0.72 [0.6 0.42]>>")) $
  s "Sd_waveguideFlute"
    # amp 0.33 -- 0.20000000298023
    # begin 0.0
    # end 1.0
    # speed ("<0.28 ! 0.128 0.132? 0.28>")
    # accelerate "<0 ! 1 -0.25>" -- 0.0
    # sustain 1
    # freq 186.0
    # scl 0.45 -- 0.20000000298023
    # ipress 0.89999997615814
    # ibreath "<0.014 0.011 0.018>" -- 0.090000003576279
    -- # ifeedbk1 0.5 -- 0.40000000596046
    # ifeedbk2 0.45 -- 0.40000000596046
    # dur 1.0
    # orbit 1
    # gain 1
  ]
  # cps 0.27
  |* gain 0.97

-- calmos
-- clutchIn 1 10 $
d1 $
  -- someCyclesBy 0.21
  -- (stutWith 2 (2/7) ((3/7) ~>)) $
  -- (inside (2/7) ((3/7) ~>)) $
  -- someCyclesBy (inside 7 (density "[0.75 | 1.25]")) $
  stack [
    -- listen 0 $
    listen (cF 1 "23") $
    degOffsetBy (1/7) (cF 0 "33") $
    -- listen "<1 1 1 0?>" $
    -- someCyclesBy 0.1 (listen 0 . every 2 (slow 2)) $
    someCyclesBy  0.21 (whenmod "<4 5>" "<1 2>" (loopAt 2 . listen 0)) $
    -- someCyclesBy 0.21
    -- (inside (2/7) (spin 2 . ((3/7) ~>))) $
    fast "1 2 1" $
    randcat [
      -- someCyclesBy (1/9) (loopAt "<1 2>" . every 4 ((1/9) ~>) .  someCyclesBy 0.13 (listen 0)) $
      (<| amp "{0.8!2 ~ [~ 0.78] ~}@5.5 ~ [~ 0.76]@0.5") $
      s "kickey_Sd"
      ,
      -- someCyclesBy 0.1 (loopAt "<1 0.5 2>" . every 3 (brak) . someCyclesBy 0.08 (listen 0)) $
      (<| amp "~ 0.9(2, 4, 1) ~ <[~ 0.74] [~@0.25 0.8@0.5]>") $
      s "kickey_Sd"
    ]
      # attack "0.001 ! 0.11"
      # release 0.48
      # legato "<1.2 [0.8 1]>"
      # curve "5.0 -2"
      # envPow 1
      # startFreq 60.0
      # startFreqMod 6.0
      # endFreq 10.0
      # endFreqMod 3.0
      # linedur 0.268
      # lowpass 500.0
      # rq 1
      # sat 0.5 -- (0.2 + (cF 0 "33") * 0.6) -- 0.5
      # smoothLo "-1.0"
      # smoothHi 1.0
      # foldRange 1.0
      # smoothAmount (every 3 (0.333 <~) $ "0.5 0.65 0.5") -- 0.5
      # splay 1.0
      # panwidth 2.0
      # hpf 70
      # gain 0.96
      -- # orientation 0.0
      # orbit 0
    ,
    -- listen 0 $
    listen (cF 1 "24") $
    degOffsetBy (1/7) (cF 0 "34") $
    whenmod 20 16 (listen 0) $
    -- listen 1 $
    sometimesBy (1/9) ((ghost' 3). (|* gain 0.7)) $
    s "hatnew_Sd(<14 19 3>,28,2)"
      # amp 0.61
      # attack (slow 2 $ "0.0001 0.14 0.02")
      # release (slow 3 $ "0.3 0.02 <0.01 0.8> 0.6")
      # curve "-2.0 [-3 -1]"
      # envPow "1.0 0.7 1.2"
      # envL1 1.30
      # envL2 1.0
      # envL3 5.20
      # envL4 4.80
      # envL5 3.30
      # envT1 ("{<1 0.10 2><3 5>}%<3 4>" |* "<0.01 2 0.3 4>")
      # envT2 ("<3.2 2 0.02>" * "<5 7>" *| (fast 2 $ "<0.3 15 7>"))
      # envT3 "<0.1 3.3 1 0.2>"
      # envT4 (slow 6.1 $ segment 18 $ range 0.1 1.83 rand)
      # envModCrv "-0.01"
      # envModPow 1.0
      # envModNoise (0.3 + ((cF 1 "34") * 0.5)) -- 0.3
      # rhpf 8500.0
      # rhpfRq 1.0
      # gain 0.92
      # orbit 2
    ,
    -- listen 0 $
    listen (cF 1 "25") $
    degOffsetBy (1/7) (cF 0 "35") $
    listen "<1 1 0>" $
    s "cym1_Sd(<1/4 1/7 1/6>,7,<2 3 -1>)"
      # amp 0.1
      # curve "-2 <<1.0 -4> -1>"
      # envPow 1.0
      # freqStart 50.0
      # freqGrow 0.3434
      # tu (slow 3.5 $ "<1 1.2 2 0.6> 0.5 2 1")
      # ringzDec (0.75 + ((cF 1 "35") * 0.25))
      # orbit "1 <[1 2] [2 1]>"
      # pan (fast 2.1 $ segment 48 $ range "-1" 1 perlin )
      # rls 0.7
    ,
    -- listen 0 $
    -- listen 1 $
    listen (cF 1 "26") $
    degOffsetBy (1/7) (cF 0 "36") $
    whenmod 12 10
    (mask (scramble 7 "t f f t f t t")) $
    every 5 (listen 0 . loopAt 2) $
    s "{[~ clapy_Sd](<1 2>,9,<4 5>)}%<7 3.5>"
      # amp 1
      # curve "-4.0"
      # envPow 1.0
      # atk 0.02
      # rls (0.2 + ((cF 1 "36") * 0.2)) --  0.3
      # crv1 0.0
      # crv2 "-14.0"
      # hpf1 600.0
      # hpf2 100.0
      # bpf1 100.0
      # bpf2 12000.0
      # orbit "1 [2 1]"
      # gain 1.05
      -- # triode 0.9
    ,
    -- listen 1 $
    listen (cF 1 "27") $
    degOffsetBy (1/7) (cF 0 "37") $
    whenmod 18 15 (loopAt 2 . listen 0) $
    often (slow "<2 3 2>") $
    someCyclesBy (1/9) ((|> xsdelay "0 0 0.1 0.4") . (<| tsdelay "0.01 <0.12 0.24>")) $
    wedge (2/3) -- (1/3)
    (
      every 6 (slow "<2 3>" . listen 0) $
      s "mutantFric_Sd(<<0 1> <2 3> 5 6 2 4>,7,<3 5>)"
        # amp 0.42
        # attack 0.01
        # release 0.9
        # spec1 0.9 -- 1e-05
        # spec2 3
        # noiseFreq 3.0
        # sigFreq 58.0
        # spring 0.414
        # damp 0.313
        # beltmass 1.0
        # source (fast 4 $ ("<0 2 3 5 1>" * (cF 1 "37") * 2)) -- (fast 4 $ "<0 2 3 5 1>")
        # hpfFreq 50.0
    )
    (
      s "mutantFricSusSd(<5 3>,9,2)"
        # amp 0.42
        # atk 0.01
        # rls 0.9
        # spec1 0.67 -- 1e-05
        # spec2 0.23
        # noiseFreq 3.0
        # sigFreq 61.0
        # spring 0.314
        # damp (0.213 + ((cF 1 "37") * 0.2)) -- 0.413
        # beltmass 0.8 -- (fast 9 $ "<1.0 0.3> 0.2 <0.4 0.1>")
        # source "<0 1>"
        # hpfFreq 150.0
        # hpf 300 -- "300 1300"
        # lpf 800 -- "<800 2900> 1200"
    )
    # orbit 1
    ,
    -- listen 0 $
    listen (cF 1 "28") $
    degOffsetBy (1/7) (cF 0 "38") $
    listen "<1 0/<5 6>>" $
    fast "1 3 2" $
    s "noise2_Sd(<4 2 7>,<14 9>,2)"
      # amp 0.7
      # curve "-4.0"
      # envPow 1.0
      # a 4.0
      # lfn1Freq 4.0
      # lfn1Scale 1.5
      # lfn2Freq 2.0
      # lfn2Scale 0.5
      # hpfFreq (800 + ((cF 0.2 "38") * 400)) -- 1000.0
      # delaytime 100.0
      # gain 1.2
      # orbit "<2 [1 2] [2 1]>"
    ,
    -- listen 0 $
    listen (cF 1 "29") $
    degOffsetBy (1/7) (cF 0 "39") $
    -- listen 1 $
    loopAt "4 <2 4>" $
    s "bassSat_Sd(<2 1 0>,7,5)"
      # amp 0.25
      # begin "{<0.01 0.1 0.03> 0.2}%16"
      # curve "-4.0"
      # envPow 1.0
      # soundmod "60 <70 55>"
      # sat 0.1
      # noiseAmp1 0.14
      # noiseAmp2 0.24
      # noiseAtk 0.005
      # noiseDcy (0.5 + ((cF 0.1 "39") * 0.2)) -- 0.75
      # orbit 0
    ,
    -- listen 0 $
    listen (cF 1 "30") $
    degOffsetBy (1/7) (cF 0 "40") $
    slow 2 $
    s "~ squareDrum_Sd(<1 3 2>,7,<4 5>)"
      # amp 0.6
      # curve "-4.0"
      # envPow 1.0
      # atk 0.001
      # dcy 0.01
      # headAmp 0.5
      # decCoef 0.175
      # ampSlope 3.0
      # rls 0.2
      # snaresAmp 0.65
      # followAtt 0.005
      # followRel 0.075
      # thresh 0.25
      # snareGate 0.6
      # rq 0.5
      # orbit 2
  ] # cps 0.5
  |* gain 0.91

-- l'espece de break d'entrée en matiere
-- resetCycles
d1 $
-- clutchIn 1 12 $
  -- every 6 (inside 5 (hurry " [0.75  1.5]"). (# legato 2)) $
  whenmod 23 19
  (every 2 (slow 2) . slowspread ($) [
    slow 5 . striate "[[10  5] | [5 15]]" . (# hpf 70) . (|* gain 0.9)
    ,
    someCyclesBy 0.1 (inside 6 (density "0.75 | 1.25"))
  --   -- ,
  --   -- slow "[[2 3] | 2]*5" . striate "[15 5 | 20 3] 10" . (|* gain 0.86) . (# hpf 120)
  --   -- ,
  --   -- brak
  ]) $
  every 5 ("<[[0.4 -0.2] | [0 0.2]] 0.2>" <~) $
  stack [
    listen (cF 1 "23") $
    degOffsetBy (1/5) (cF 0 "33") $
    -- listen 0 $
    every 6 (listen 0) $
    (<| amp "0.4 0.3 0.3 [0.1 0.3 ~] 0.4") $
    -- (<| amp "0.4 0.3 0.3 [0.1 0.3 ~] 0.4") $
    s "Sd_kickMist"
      # begin 0.0
      # end 1.0
      # speed 1.0
      # accelerate 0.0
      # sustain (0.6 + ((cF 0 "33") * 0.4)) --1.0
      # freq 0.8
      # noise 1.0
      # env1L1 4800.0
      # env1L2 43.0
      # env1L3 29.0
      # env1T1 0.005623
      # env1T2 0.429
      # curve1_1 "-4.31"
      # curve1_2 "-5.0"
      # hpf 60
      # gain 0.83
    ,
    listen (cF 1 "24") $
    degOffsetBy (3/5) (cF 0 "34") $
    -- listen 0 $
    every 9 (listen 0) $
    -- slow 2 $
    (<| dcy "[1 ~ 1] [~ 0.1 1] [0.7 0.1 ~] [0.6 ~ 0.1] [0.8 1 ~]") $
    s "kickRingz_Sd"
      # amp 0.25
      # attack 0.0
      # release 1.2000000476837
      # sustain 1.0
      # envPow 0.6 -- 1.0
      # clickCurve "-4.0"
      # clickInScale 1.0
      # clickEnvPow 0.6 -- 1.0
      # clickHpf 80.0
      -- edit 170323
      # clickHpRq (0.6 - ((cF 0 "34") * 0.4)) --0.2 --1.0
      # clickLpf 13000.0
      -- edit 170323
      # clickLpRq (0.7 - ((cF 0 "34") * 0.5)) --0.2 -- 1.0
      # clickAmp 1.0
      # envL1 0.10000000149012
      # envL2 0.7 -- 1.2000000476837
      # envL3 3.0
      # envL4 0.8 -- 2.0999999046326
      # envL5 0.10000000149012
      # envT1 0.10000000149012
      # envT2 1 -- 0.20000000298023
      # envT3 0.1 -- 0.0
      # envT4 0.7 -- 0.10000000149012
      # curve "-4.0"
      # envpL1 1 -- 0.10000000149012
      # envpL2 0.8 -- 1.2000000476837
      # envpL3 2 -- 3.0
      # envpL4 0.7 -- 2.0999999046326
      # envpT1 0.06 -- 0.10000000149012
      # envpT2 0.1 -- 0.0
      # envpT3 0.7 -- 1.2000000476837
      # curvep "-4.0"
      # freq 60 -- 40.0
      -- # dcy 1 -- 0.25
      # shape 0.4
      # ffreq 1000.0
      # gain 0.84
    ,
    listen (cF 1 "25") $
    degOffsetBy (3/10) (cF 0 "35") $
    -- listen 0 $
    foldEvery [4,7] (listen 0) $
    every 5 (chunk 5 (spin 2)) $
    someCyclesBy 0.62 (spreadf [(# scram "<0 0.1>!2 <0.4 1.2> 1!2 "), (# binshift 0.12)]) $
    every 3 ("<0.2 [0.2 0 0.4] [0.2 0] [0.4 0.2 0]>@2 0@3" <~) $
    (<| modFreq "[~ 2000 ~] [200 ~ 4000] 400@2 <[4000 ~ 30] [1 1000 ~]>") $
    s "hiSin_Sd"
      # amp 0.25
      # attack (segment 10 $ fast 3.2 $ range 0.001 0.041 perlin) -- 9.9999997473788e-05
      # sustain (segment 15 $ fast 4.2 $ range 0.14 0.38 perlin) -- 1.0
      # release 1.2000000476837
      # curve "0.6" -- "-4.0"
      # envL1 0.0
      # envL2 1.0
      # envL3 (0.2 + ((cF 0 "35") * 0.6)) --0.30000001192093
      # envL4 0.0
      # envT1 0.019999999552965
      # envT2 0.1 -- 0.11999999731779
      # envT3 0.1 -- 0.0099999997764826
      # envLev 15.0
      # envPow 1 -- 1.0
      # envDivDur 1.0
      # theta "[0.7 | 0.2 | 0.5]*15" -- 0.5
      # rho 0.80000001192093
      # a0 0.9 -- 1.0
      # a1 0.25 -- 0.0
      # a2 0.3 -- 0.0
      # filterfreq 6000 -- 1000.0
      # rq 0.4 -- 1.0
      # selectMod 0 -- 0.0
      # sinFreq 8500 -- 12000.0
      # sinAmp 0.2 -- 0.30000001192093
      -- # modFreq 300 -- 0.20000000298023
      # lpf 4100
      # lpq (segment 10 $ fast 2.1 $ range 0.1 0.5 perlin)
      # pan (segment 15 $ fast 4.7 $ range 0 1 (rand * square ))
      # orbit 2
    ,
    -- listen 0 $
    randcat [
      listen (cF 1 "26") $
      degOffsetBy (2/5) (cF 0 "36") $
      -- every 3 (listen 0) $
      slow 2 $
      (<| spreadRate "~ ~ 3 ~ <~ <20 2>>") $
      s "clapGray_Sd"
        # amp 0.2 -- 0.10000000149012
        # attack 0.1 -- 0.0
        # decay 1 -- 0.15000000596046
        # sustain 1.0
        # release 1.2000000476837
        # curve 2 -- "-4.0"
        # envPow 1 -- 1.0
        # atk 0.08 -- 0.0010000000474975
        # rls 0.2 -- 0.25
        # crv 4 -- "-4.0"
        -- # spreadRate "<20 [5 | 10]>" -- 75.0
        # minDelay 0.03 -- 0.025000000372529
        # maxDelay 0.06 -- 0.050000000745058
        # rq 0.31 -- 0.40000000596046
        # blend 0.69999998807907
        # reverb 0.1 -- 0.10000000149012
        # damp 0.5 -- 1.0
        # room 0.1
        # size 0.04
        -- edit 170323
        # ring (0 + ((cF 0 "36")))
        # ringf (200 + ((cF 0 "36") * 7000))
        # ringdf 0.1
        # gain 0.9
        # orbit 1
      ,
      listen (cF 1 "27") $
      degOffsetBy (1/5) (cF 0 "37") $
      -- listen 0 $
      slow "2 4" $
      (<| repeats "{<130 120> [120 _ 32] ~}%2.5") $
      s "Sd_stochadiet2"
        # amp 0.5
        # begin "[0.1 | 0]*5" -- 0.0
        # end 1 -- "[1 | 0.6]" -- 1.0
        # speed 1
        # sustain 0.7 -- 1.0
        # sdm "<1 [2 | 0.7]>"
        -- # repeats 120 -- 32.0
        -- edit 170323
        # from (segment 3 $ slow (0.4 + ((cR 0 "37") * 0.46)) $ range 12 16 tri) -- 16
        # dest (smooth $ fast (0.5 + ((cR 0 "37") * 6))  $ range 24 36 perlin) -- 32.0
        # gain 0.97
    ]
    ,
    -- listen 0 $
    whenmod 17 10 (
      juxBy  0.4 (slowspread ($)[
        ((# real 0.1) . (# imag 0.2))
        ,
        (# scram "0.2")
        ,
        (# smear 0.8)
        ,
        (# binshift 2)
        ,
        ((# tsdelay "<0.1 0.3>") . (# xsdelay "<0.3 0.1> 0.05") )
        ,
        listen 0
    ] ) .  (# hpf 150)) $
    randcat [
    listen (cF 1 "28") $
    degOffsetBy (2/5) (cF 0 "38") $
      -- listen 0 $
      foldEvery [4,11](listen 0) $
      every 6 (listen 0) $
      slow 2 $
      (<| wrap "[~ [0.1 1 0.9]] 0.8 <~ 0.3> [~ 0.7]") $
      s "complexosc_Sd"
        # amp 0.5 -- 1.0
        # attack 0.0
        # sustain 1.0
        # release 1.2999999523163
        # curve "-4.0"
        # envPow 1.0
        # feedBack "[0.1 | 0.6 | 1?]*10" -- 1.0
        # freq1 160 -- 40.0
        # fm1 (segment 9 $ fast (0.4 + ((cR 0 "38") * 2.6))  $ range "[0.06 | 0.1 | 0.2]" 0.3 perlin) -- 0.10000000149012
        # pm1 (segment 5 $ fast (2 - ((cR 0 "38") * 1.9))  $ range "[0.2 | 0 | 0.13]" 0.34 tri) -- 0.0
        # amp1 1.0
        # ring1 (segment 15 $ fast 3.2 $ range 0 0.8 (isaw * tri))
        # offset1 0.01 -- 0.0
        # freq2 (slow 3 $ "0.5 <20 0.5>@2 <6 0.7> 0.2") -- 0.5
        # fm2 0.1 -- 0.10000000149012
        # pm2 (segment 10 $ fast 2.1 $ range 0.1 0.7 (rand * tri)) -- 0.0
        # amp2 1.0
        # ring2 (0.3 + ((cF 0 "38") * 0.6)) --0.7 -- 1.0
        # offset2 0 -- 0.0
        # fold 0.7 -- 0.80000001192093
        -- # wrap 0.4 -- 0.89999997615814
        # switch (slow 6 $ "0 1 3 2") -- 2
        # hpf 150
        # gain 0.65
        # orbit 2
      ,
      listen (cF 1 "29") $
      degOffsetBy (2/5) (cF 0 "39") $
      -- listen 0 $
      foldEvery [6,7] (listen 0) $
      every 4 (inside 5 (spin 3)) $
      (<| rls "~ <<[~ ~ 0.18] 1 ~> ~> ~ <~ <[~ 0.092 0.2] ~ 0.7>> <0.1 ~>") $
      s "sosSnare_Sd"
        # amp 0.3 -- 0.80000001192093
        # attack 0.0
        # sustain (0.4 + ((cF 0 "39") * 0.6)) --1.0
        # release 1.3999999761581
        # curve "-4.0"
        # envPow 1.0
        # atk 0 -- 0.0049999998882413
        -- # rls 0.1 -- 0.10000000149012
        # crv "-4.0"
        # atk1 0.000 -- 0.050000000745058
        # rls1 "[0.3 | 0.1 | 0.6?]*15" -- 0.60000002384186
        # crv1 "-8.0"
        # freq "[1900 | 2900]*5" -- 405.0
        # drumModeAmp 0.4 -- 0.25
        # timbreIndex 0.3 -- 0.38499999046326
        # modHarmonic 0.45199999213219
        # snareAmp 40.0
        # nyquist 6000 -- 1700.0
        # snareRez 2400 -- 1000.0
        # ffreq 1300 -- 40.0
        # rq 1 -- 0.10000000149012
        # bwr 1
        # pan (smooth $ fast 12.3 $ range 0 1 tri)
        # orbit 1
        # gain 0.68
    ]
  ]
  |* gain 1.065
# cps 0.5833333 -- (175/60/5)


clutchIn 1 12 $ silence

-- nouvotube sp23
-- copié 040323
-- niveaux ?
d1 $
  -- every 6 (spread ($) [off 7 (density 0.25), spin "2/6"]) $
  -- someCyclesBy 0.15 (inside 6 (density "0.75 | 1.25")) $
  stack [
    listen (cF 1 "23") $
    degOffsetBy (1/3) (cF 0 "33") $
    -- listen 0 $
    -- every 4 (chunk 3 (hurry "<1.5 [1.75 1]>")) $
    (<| speed "0.9 [0.8 0.6]!2 0.8 [0.6 0.5]!2") $
    -- (<| env1L2 "70 40 60 70 60 40 70 30 40") $
    s "Sd_kick_oto309"
      # begin 0.0
      # end 1.0
      -- # speed 1.0
      # accelerate 0.2
      # sustain 1.0
      # freq 0.5
      # env0L1 0.5
      # env0L2 1.0
      -- edit 170323
      # env0L3 (0.15 + ((cF 0 "33") * 0.25)) -- 0.5
      # env0L4 0 -- 0.0
      # env0T1 0.0049999998882413
      # env0T2 0.059999998658895
      # env0T3 0.25999999046326
      # env0Crv1 "-4.0"
      # env0Crv2 "-2.0"
      # env0Crv3 "-4.0"
      # env1L1 110 -- 110.0
      # env1L2 80 -- 59.0
      # env1L3 30 -- 29.0
      # env1T1 0.01 -- 0.0049999998882413
      # env1T2 0.4 -- 0.28999999165535
      # env1Crv1 "-4.0"
      # env1Crv2 "-5.0"
      # hpf 73
      # gain 1.3
    ,
    -- kick rempli
    listen (cF 1 "24") $
    degOffsetBy (1/4) (cF 0 "34") $
    -- listen 0 $
    (<| rls "[0.9 <0.1 [0.1 0.6]> 0.4] [0.6 [0.4 0.1] 0.3] [0.6 [0.3 0.1] [0.4 0.1]*<1 1 2>]") $
    s "t1kickSusSd"
      # atk 0.01
      # dcy 0.4
      # sst 1
      -- edit 170323
      # sus (0.12 + ((cF 0 "34") * 0.23)) -- 0.2
      -- # rls 0.1 -- 0
      # gain 0.9
    ,
    listen (cF 1 "25") $
    degOffsetBy (2/3) (cF 0 "35") $
    -- listen 0 $
    -- slow 2 $
    (<| rq "~ 3 <1 ~>") $
    s "kraftySnareSusSd"
      # amp 0.5 -- 1.0
      -- # rq "<3 1>" -- 3.0
      # atk 0.01
      -- edit 170323
      # dcy ("[1 | 0.2]" + ((cF 0 "35") * 0.5))-- "[1 | 0.2]"-- 0.2
      # curve "-6.0"
      # orbit 1
      # pan (fast 2.5 $ tri)
      # gain 0.92
    ,
    listen (cF 1 "26") $
    degOffsetBy (1/6) (cF 0 "36") $
    -- listen 0 $
    (<| rq "[0.6 0.3 0.6] [0.2 0.3 0.7] [0.2 0.4 0.2] [0.7 0.2 0.3] [0.4 0.3 0.1] [[0.4 0.2] 0.8 0.3]") $
    s "hihatElectroSusSd"
      # amp 0.3
      # atk 0.001
      -- edit 170323
      # rls ("[0.25 | 0.35]!10" + ((cF 0 "36") * "[0.5 | 0.75]!12")) -- 0.3
      # curve "-8.0"
      # filterFreq 4010.0
      -- # rq 0.56
      # pan (segment 14 $ fast 1.5 tri)
      # orbit 2
    ,
    listen (cF 1 "27") $
    degOffsetBy (1/12) (cF 0 "37") $
    -- listen 0 $
    (<| rls "[0.7 [0.4  0.2]*<1 2> 0.7] [0.8 [0.4 0.1]*<1 2 1> 1] [[0.6 0.2]*<2 1> 0.4 1]") $
    s "rim808SusSd"
      # amp 0.06 -- 0.01
      # atk 0.001
      -- # rls 0.6 -- 1.0
      # tu 0.29 -- 1.0
      # tuf 0.58 -- 1.0
      # gate "[0.5 | 1]!9"
      -- edit 170323
      # sus ("[0.3 | 0.5 | 0.1]!6" + ((cF 0 "37") * 0.4)) -- "[0.3 | 0.5 | 0.1]!6"
      # orbit 2
      # gain 0.9
    ,
    listen (cF 1 "28") $
    degOffsetBy (1/3) (cF 0 "38") $
    -- listen 0 $
    slowCat [
      listen 1 $
      slow 12 $
      (<| curve "<-2 -4> <2 7> 0.6") $
      s "cymnewSusSd"
        # atk 0.25 -- 0.0
        # rls 3 -- 4.0
        -- # curve "-2" -- "-8.0"
        # tu 1.2 -- 6.0
        -- # dec 1.7
        -- # sus 3.7
        -- # rel 1
        # orbit 1
        # gain 0.5
      ,
      listen 1 $
      (((5/3)) <~) $
      slow (12 * "1 <0.25 0.75>") $
      (<| speed "-4 [-2 -4] -6") $
      s "Sd_cymnew"
        # attack 0.25
        # release 5
        # legato 8
        # amp 0.20000000298023
        # begin 0.0
        # end 1.0
        # accelerate 0.0
        # sustain 10.0
        # freq 1.2
        # orbit 1
        # gain 0.88
      ]
      -- edit 170323
      # scram (segment 12 $ (cF 0 "38") * 0.3)
    ,
    -- listen 0 $
    randcat [
      -- listen 0 $
      listen (cF 1 "29") $
      degOffsetBy (1/6) (cF 0 "39") $
      every 3 (chunk' 3 (spin "<[2 1] [1 2]>")) $
      (*| spec1 "[0.7 0.6 0.8] [0.6 [0.7? | 1.1 0.82] [0.8 1.2 0.3]] [0.8 0.6 1.25]") $
      s "mutantFricSusSd"
        # atk 0.01
        # rls 0.1 -- 1.0
        # spec1 1e-05
        # spec2 0.03
        # noiseFreq 1.0
        # sigFreq "[50 | 61.5]*9" -- 50.0
        # spring 0.414
        # damp 0.313
        # beltmass ("[1 | 2 | 3 | 10 | 7]" * 0.1) -- 1.0
        # source 0.0
        # hpfFreq 50.0
        -- env
        # dec 0.1
        # sus 0.1
        # rel 0.2
      ,
      -- listen 0 $
      listen (cF 1 "30") $
      degOffsetBy (1/3) (cF 0 "40") $
      slow "<2 1 [1 2] [2 1]>" $
      (<| ringTime "10 1.2 ~ [2 20 3] 0.1 [40 1 2]") $
      s "justwannahavefunSusSd"
        # amp 0.2 -- 0.10000000149012
        # freq "[<492 246> | 123] * 9" -- 440.0
        -- # ringTime 1.2 -- 10.0
        # dec 1 -- 1
        # sustain "[1 | 2 | 0.7]*9" -- 1.0
        # rel 1.3
    ]
      -- edit 170323
      # real (segment 128 $ 1 - (cF 0 "39") * 0.25)
      # imag ((cF 0 "39") * 0.25)
      # orbit 2
    ,
    -- listen 0 $
    slowCat [
      listen (cF 1 "30") $
      degOffsetBy (1/6) (cF 0 "40") $
      listen 1 $
      slow 2 $
      (<| impRate "3.6 7.2 14.4") $
      s "impnSusSd"
        # amp 0.5 -- 0.75
        # atk 0.001
        # rls 0.1
        # curve "-2" -- "-5.0"
        -- # impRate 3.6 -- 10.0
        # kfreq 123 -- 1.0
        # kdcy 0.173 -- 1.0
        # tu 1.0
        # bwr 0.7 -- 1.0
        # delTime 0.07126 -- 0.25
        # decTime (0.25 + ((cF 0 "30") * 0.5 )) -- 0.5 -- 1.0
        # legato 1.2
        # dec 0.2
        # sus 0.4
        # rel 0.8
      ,
      -- listen 0 $
      degOffsetBy (2/3) (cF 1 "41") $
      listen (cF 1 "31") $
      -- slow 3 $
      -- hurry 0.21 $
      (<| sdm "{23 ~ 56 100 [~ [23 56] 100] 100}%1.5") $
      s "Sd_stochadiet1"
        # attack 0
        # sustain 1.0
        # release "1.8 0.5 2 0.38 3"
        # begin 0.0
        # end 1.0
        # speed (1.0 * (slow 3 $ range 0.125 4 tri))
        -- # sdm "<23 100 100>"
        # modSin ("[0.2 | 0.3]" + ((cF 0 "41") * 0.45)) -- "0.2 0.3"
        # from 1.6 -- 9.0
        # dest 0.9
        # minSeq 0.10000000149012
        # maxSeq 0.30000001192093
        # gain 1.16
      ]
        # orbit 1
]
|* gain 0.97
# cps 0.6


-- ancien pref de pierre
d1 $
  -- clutchIn 1 12 $
  -- someCyclesBy 0.16
  -- (
  --   (# legato 2)
  --   . (
  --     inside 5
  --     (spreadf [
  --         brak ,
  --         ply "1 <2 [2 1]>",
  --         -- slow 4 . gap "<12 [24 6] [12 3]>",
  --         append "~"
  --     ]))
  -- ) $
  stack [
    -- listen 0 $
    listen (cF 1 "23") $
    degOffsetBy (1/9) (cF 0 "33") $
    listen "<1 1 1 0?>" $
    foldEvery [6,9] (listen 0) $
    (<| amp (slow 2 $ "0.5!2 0.35@2 0.5!2 0.2!2 0.5!2 0.1@2 0.3!2 0.5!2 0.2@2 0.1!2 ") ) $
    s "kikAwSusSd"
      -- # amp 0.5
      # basefreq 50.0
      # ratio 7.0
      # sweeptime 0.05
      # envL1 1.0
      # envL2 0.8
      # envL3 0.0
      # envT1 0.3
      # envT2 0.15
      -- ajout 1509
      # decay 0.2
      # sustain (0.3 + ((cF 0 "33") * 0.4)) -- 0.4
      # release 0.8
      -- test
      # hpf 70
      # gain 0.93 -- 0.97
    ,
    sometimesBy 0.36
    (chunk 4
      (slowspread ($)[
      gap "2 <1/2 <4 3>>",
      (
        slow "2 3 <1 0.5>"
        . (|+ release ("2 5 4" * "<1 2 0.5 0.3>"))
      )
    ]
    )
    ) $
    -- listen 0 $
    stack [
      -- listen 0 $
      listen (cF 1 "24") $
      degOffsetBy (1/3) (cF 0 "34") $
      listen "<1 1 0?>" $
      every' 3  2 (listen 0) $
      -- someCycles (density "1 [2 0.5]") $
      (<| amp "0.3!2 0.23 0.3!4 0 0.3!2") $
      s "kickhi_Sd"
        -- ajout 1509
        -- # decay 0.2
        -- # sustain 0.5
        -- # release 0.8
        # attack 0.02
        # release 0.19
        -- # amp 0.33
        # curve "-4.0"
        # envPow 1.0
        # vcaLev1 0.5
        # vcaLev2 0.1
        # vcaLev3 0.01
        # vcaLev4 0.01
        # vcaLev5 0.0
        # vcaTime1 0.01
        # vcaTime2 0.5
        # vcaTime3 1.26
        # vcaTime4 0.1
        # vcaCurve1 "-4"
        # vcaCurve2 "-2.0"
        # vcaCurve3 "-4.0"
        # vcfLev1 122.0
        # vcfLev2 30.0
        # vcfLev3 33.0
        # vcfLev4 28.0
        # vcfTime1 0.041
        # vcfTime2 0.29
        # vcfTime3 1.0
        # vcfCurve1 "-6.0"
        # vcfCurve2 "-5.0"
        # tu (1 + ((cF 0.2 "34") * 0.2)) --  1.086
        # sinLev 16.0
        # sinFreq 1.0
        # hpf 100
        # gain 1.05 -- 1.2
      ,
      -- listen 0 $
      listen (cF 1 "25") $
      degOffsetBy (1/6) (cF 0 "35") $
      listen "<1 0 1>" $
      foldEvery [12, 18] (listen 0) $
      someCycles ("<0.2 0.4>" <~) $
      (<| amp "~@2.5 0.5 ~@1.5") $
      s "snareySusSd"
        -- # amp 0.75
        # atk 0.001
        # rls (0.2 + ((cF 0.1 "35") * 0.5))  -- 0.3
        # freq 120.0
        # gain 0.84
        # orbit 1
    ]
    ,
    -- listen 0 $
    listen (cF 1 "26") $
    degOffsetBy (2/9) (cF 0 "36") $
    listen "<1 1 1 0>" $
    whenmod 12 10 (listen 0) $
    (<| amp (every 6 (density "<[1 2] [0.5 2] [2 1]>") $ "0.35!2 0.3!2 0.15 0.35@2 0.3 0.35!2")) $
    s "haty48Sd"
      -- # amp 0.75
      # atk 0.0
      # rls (0.1 + ((cF 0 "36") * 0.5)) -- 0.12
      # curve "-4.0"
      # envaL1 1.81
      # envaL2 0.0
      # envaL3 2.52
      # envaL4 0.85
      # envaL5 0.0
      # envaT1 0.01
      # envaT2 0.02
      # envaT3 0.0
      # envaT4 0.0
      # envaCrv 3.54
      # envpL1 0.0
      # envpL2 14936.0
      # envpL3 1279.0
      # envpL4 0.0
      # envpT1 0.0
      # envpT2 0.33
      # envpT3 0.0
      # envpT4 0.53
      # envpCrv "1.64"
      # modFreq 1.0
      # modAmt 1.4
      # sinfAdd 1.7
      # sinPhase 0.28
      # sinpAdd (1 + (cF 0.1 "36")) -- 1.7
      # rf1Freq 8938.8
      # rf1Rq 0.26
      # rf2Freq 765.0
      # rf2Rq 0.62
      # hpfFreq 3699
      # lpf 14000
      # pan (segment 10 $ slow 2.1 $ range 0 1 (cosine * tri))
      # orbit 2
      # gain 1.55
    ,
    someCyclesBy 0.16
    (inside 5 (spreadf [gap 32, ply "1 <2 [2 1]>", off 5 (# accelerate "-1"), append "~"]) )$
    stack [
      -- listen 0 $
      listen (cF 1 "27") $
      degOffsetBy (2/3) (cF 0 "37") $
      foldEvery [9, 12] (listen 0) $
      (<| amp (slow 2 $ "0 0.5 0 0 0.1")) $
      s "ultraHiSummerSusSd"
        -- # amp 1.0
        # atk 0.01
        # rls 1.0
        # curve "-1.0"
        # blpFreq1 9500 -- 16000.0
        # blpFreq2 5400 -- 16150.0
        # seqRate 10.91 -- 0.2
        # seqVal1 0.1 -- 70.0
        # seqVal2 2 -- 30.0
        # seqVal3 0.1 -- 0.0
        # decay 0.2
        # sustain (0.5 + ((cF 0 "37") * 0.5))
        # release 0.7
        # pan (fast 3.1 $ range "-1" 1 (square * saw))
        # orbit 1
      ,
      listen (cF 1 "28") $
      degOffsetBy (1/3) (cF 0 "38") $
      listen "<1 1 0/2>" $
      (<| amp (every 3 (0.2 <~) $ density "<[0.5 2] 1 [2 1] [0.5 1] [2 1] [1 0.5]>" $ "0.1 0.2 0.4 0.2 0.1 0.4 0.1 0.3")) $
      s "zeynepSusSd"
        -- # amp 1.0
        # envL1 0.001
        # envL2 0.3
        # envL3 0.81
        # envL4 0.2
        # envL5 0.10
        # envT1 1.0
        # envT2 1.0
        # envT3 4.0
        # envT4 0.2
        # dur 1.0
        # beats 1.0
        # distort (0.01 + ((cF 0 "38") * 0.062)) --  0.2
        # gain 1.3
        # orbit 2
    ]
    ,
    -- listen 0 $
    listen (cF 1 "29") $
    degOffsetBy (1/6) (cF 0 "39") $
    listen "<1 0 1 <1 0> 0>" $
    s "gcdLcmDmGene_Sd"
      # amp 0.32
      # attack "<0.01 0.62 0.4 0.8>"
      # release "<0.8 1.2 0.2 0.03>"
      # curve "-4"
      # envPow 1.0
      # randMin 30.0
      # randMax (32.0 * (wchoose [(1, 0.7), (3, 0.2), (2.32, 0.1)]))
      # mul1 1.0
      # mul2 40.0
      # mulTanh 0.001
      # modu1 100.0
      # modu2 300.0
      # rate1 0.6
      # rate2 0.06
      # smooth1 0.4
      # smooth2 ((cF 0 "39") * 0.4)  -- 0.0
      # orbit "<0 [1 0] [0 1]>"
      # hpf 90
      # gain 0.95
  ]
|* gain 1.04
# cps 0.75


resetCycles

-- le tube // à sauver
-- fin des cymbales dans 2Mo_synthdefs_with_timescale
--  en cours 1106, seq niveaux ok, rajouter fonctions / silences
d1 $
  -- clutchIn 1 10 $ silence
  -- someCyclesBy 0.125 (inside 7 (density "[0.75 | 1.26]")) $
  -- whenmod 9 6 (spreadf [sometimesBy 0.111111111 (iter' 1), slow 2, listen 0] ) $
  someCyclesBy (1/9) ((slowSqueeze "<0.166666 0.111111111 5.555555555555555e-2 4.16666666666666666664e-2>") . (# gain 0.85)) $
  stack [
    listen (cF 1 "23") $
    degOffsetBy (1/9) (cF 0 "33") $
    -- listen 0 $
    someCyclesBy (1/18) (slow 1.5) $
    -- whenmod 9 6 (spreadf [sometimesBy 0.111111111 (iter' 1), slow 2, listen 0] ) $
    sew (someCycles  (fast "2 <1 2>") $ every' 3 1 (slow 2) $ "[t f@2]!3 f t@4 f")
    -- sew "t" -- kick
    -- sew "f" -- metro_Sd
    (
      sew ("f@5 t")
      (
        -- listen 0 $
        randcat [
          (<| amp ( "0.45!<4 6> 0.0@<5 3> ")) $
          s "kickBoomy_Sd"
          ,
          someCyclesBy (1/6) (listen 0) $
          (<| amp ( "0.45*<4 6> 0.0@<5 3> ")) $
          s "kickBoomy_Sd"
        ]
          -- s "kickBoomySusSd(<<4 6> <8 2> <3 4>>,9,3) "
          # amp 0.3 -- 0.5
          # legato 2
          # attack 0.01 -- 0.0014
          # release 0.5 -- 0.7
          # curve "-5.0"
          # frq1 180.0
          # frq2 290 --330.0
          # frq3 90 -- 175.0
          # frq4 220 -- 1224.0
          # envT1 0.012
          # envL1 0.0
          # envT2 0.012
          # envL2 1.0
          # envT3  (0.2 + (cF 0.1 "33")) -- 0.42
          # envL3 0.7
          # envCrv "-4.0"
          # lvlScale 1.0
          # hpfFreq 150.0
          # splay 1.0
          # panwidth 2.0
          # hpf 65
          -- # orientation 0.0
          # orbit 0
      )
      (
        -- bassdrum
        -- listen 0 $
        listen (cF 1 "24") $
        degOffsetBy (1/6) (cF 0 "34") $
        listen "<1 1 1 0>" $
        every' 5 1 (spreadf [slow 1.5, listen 0]) $
        whenmod 18 14 (listen 0) $
        sometimesBy (1/6) (spreadf [slow 2, someCyclesBy 0.2222222222 (listen 0)]) $
        spreadChoose ($) [
          (<| amp "[0.5!16]")
          ,
          (<| amp "{0.5*8}%1.125")
        ] $
        s "batuhanSd"
          # attack 0.001
          # release 0.7 -- 0.9
          # amp 0.44
          -- # legato 2
          # curve "-4.0"
          # envPow 1.0
          # eSawDec 1.6
          # eSinL1 0.0
          # eSinL2 2.0
          # eSinL3 1.0
          # eSinL4 0.32
          # eSinT1 1.24
          # eSinT2 0.82
          # eSinT3 (0.1 + ((cF 0.1 "34") * 0.2))  -- 0.12
          # eSinC1 "-4.0"
          # eSinC2 "14.0"
          # eSinC3 "-4.0"
          # sinFreq 56.0
          # sawMix (0.7 * (range 0.7 1.2 $ slow "<[1 2] 2>" $ perlin))
          # sawFreq 11.0
          # bpfFreq 162.0
          # bpfRq 0.6
          # bpfMix 4.6
          # brfFreq1 46.1
          # brfFreq2 45.0
          # brfRq 0.09
          # splay 0
          # panwidth 0
          -- # orientation 0.0
          # lpf "[400? 5400] [12000? 3000] [2800 [200 9000]] <700!2 8000@3>"
          # hpf 70
          # gain 1.129 -- 1.2
          # orbit 0
      )
    )
    (
      -- ,
      -- fout tout en l'air
      -- listen 0 $
      listen (cF 1 "25") $
      degOffsetBy (1/3) (cF 0 "35") $
      listen "1 <1 0>" $
      slow 2 $
      -- every' 3 1 (spreadf [slow 2, listen 0]) $
      -- whenmod 18 16 (listen 0) $
      (<| amp "[0.3 [0.25!3  0.3@2]]") $
      s "metro_Sd*7"
        -- # amp 0.3
        # dcy 0.43
        # sst 1
        # rls 0.7
        # curve "-4.0"
        # envL1 0.0
        # envL2 1.0
        # envL3 0.3
        # envL4 0.0
        # envT1 "<0.002 [0.001 0.02]>"
        # envT2 (0.1 + ((cF 0.1 "35") * 0.4))  -- 0.2
        # envT3 0.1
        # envT4 0.750
        # envDivDur 1.0
        # theta (slow 4 $ range 0.5 1 perlin)
        # rho 0.8
        # filterfreq 200.0
        # rq 1.0
        # pan (slow 2 $ range "-1" 1 square)
        # gain 1
        -- # orbit "<2 1> 2 1? [2 1]"
    )
    ,
    -- listen 0 $
    listen (cF 1 "26") $
    degOffsetBy (1/3) (cF 0 "36") $
    listen "1 <0 1> 1" $
    whenmod 18 15 (listen 0) $
    -- someCyclesBy (2/7) (("<0.16666666? 0.111111111>"<~) .(spin "<2 <1 2>>") . every 2 (spreadf  [loopAt 2 , listen 0])) $
    -- someCyclesBy (1/3) ("<0.16666666666666666 0.11111111111 5.5555555555e-2 0.16666666666 0.22222222222>" <~) $
    (<| amp "~ [0!3 0.5!2 0.3!3 0]") $
    s "clapy_Sd"
      # amp 0.5
      # curve "-4.0"
      # envPow 1.0
      # atk 0.02
      # rls 0.3
      # crv1 0.0
      # crv2 "-4.0"
      # hpf1 600.0
      # hpf2 1000.0
      # bpf1 2000.0
      # bpf2 1200.0
      # pan (fast 9.1 $ every 3 ((1/3) <~) $ range "-1" 1 perlin)
      # gain 1.09
      # orbit "1 2"
    ,
    -- ringmod percussif
    -- listen 0 $
    listen (cF 1 "27") $
    degOffsetBy (1/9) (cF 0 "37") $
    listen "<[0 1] [1 0] 1 0> <1 0>" $
    whenmod 20 15 (listen 0) $
    every' 3 "<1 2>" (spreadf [slow 1.5, every 2 (listen 0), (0.16666666 <~)]) $
    ("<0.2222222222 5.555555555555555e-2 0.11111111111 0.16666666666>" ~>) $
    slow 2 $
    (<| amp "0.05@<0.5 1 1> 0@<8.5 8 8>") $
    s "lcm2_Sd"
      # amp 0.41
      # curve "-4.0"
      # envPow 1.5
      # envNoiseVol 1.3
      # mod1 (5 + ((cF 1 "37") * 3)) -- 5 -- 3.09431
      # mod2 24.0487
      # gain 0.98
      # orbit 1
    ,
    -- pouic pouic
    -- listen 0 $
    listen (cF 1 "28") $
    degOffsetBy (1/6) (cF 0 "38") $
    listen "<1 [1 0] 1 0>" $
    whenmod 18 13 (listen 0) $
    every 7 (spreadf [slow 2, listen 0, (0.333 ~>)]) $
    every' 2 1 ("{0.111111111111 5.5555555555e-2 0.222222222222222 0.27777777777778}%6" <~) $
    (<| amp "0.1 0 <0 0.18> 0.15!0.75 0@1.5 0.1!0.75 0.1 0 0.18") $
    s "rim_Sd"
      # amp 0.2
      # curve "-4.0"
      # envPow 1.0
      # tu (0.1 + ((cF 0 "38") * 0.4)) -- 0.1 -- 1.0
      # envfL1 140 -- 1600.0
      # envfL2 300 -- 5600.0
      # envfL3 90 -- 800.0
      # envfL4 200 -- 250.0
      # envfT1 0.001
      # envfT2 0.001
      # envfT3 0.001
      # envf2L1 90 -- 1000.0
      # envf2L2 1900 -- 1600.0
      # envf2L3 90 -- 700.0
      # envf2L4 1200 -- 200.0
      # envf2T1 0.001
      # envf2T2 0.001
      # envf2T3 0.06
      # sinFreq 90 -- 400.0
      # rhpfFreq 90 -- 100.0
      # rhpfRq 1.0
      # bpfFreq1 900 -- 327.0
      # bpfFreq2 200 -- 430.0
      # bpfRq1 0.5
      # bpfRq2 0.5
      # rlpfFreq 700 -- 11100.0
      # rlpfRq 0.1 -- 0.5
      # pan (slow 3.3 $ segment 18 $ every' 2 1 ((1/18) <~) $ range "-1" 1 perlin)
      # gain 0.7
      # hpf 210
      # orbit 1
  ] # cps 0.75
  |* gain 1.08

resetCycles

-- nouvo 220623, 3 sons, ganz debil
-- clutchIn 1 16 $
d1 $
  whenmod "12 23 43" "11 21 40"
 (
   slow "1 1.5"
    . (|* t1glide "3 0.21")
    . (|* t2glide "0.76 3 1.4")
    . (|* h1glide (slow 1.5 $ smooth cosine))
    . (|* h2glide (slow "3 4" $ "3 4 12"))
 ) $
 every "<6 11>"
 (within (0.25, 0.75)
   (|* cfreq (segment 16 $ range 0.75 1 isaw))
   . (|* accelerate "1 0.75 -0.5")
 ) $
  somecyclesBy 0.21
  (
    (|* sustain "0.0125 <0.0125 0.00125>")
    . (|+ attack "0.01 0.0125")
    . (|+ coarse "4 3 -1 0")
    . (|* gain 1.1)
   ) $
   someCyclesBy 0.16 (every "4 2" (swingBy ("3/8 [1/8 5/16]") "3 5 <2 4>" . slow "2 <0.5 2>" . (# accelerate "-1") . (|* freq (segment 16 $ range 0.65 1.22 saw)))) $
   stack [
       -- listen 0 $
       listen (cF 1 "23") $
       degOffsetBy (1/4) (cF 0 "33") $
       whenmod "8 6" "6 5" (listen 0) $
       whenmod 5 "4 3" (0.5 <~) $
       every 3 (chunk 4 (fast 2)) $
       (<| freq (whenmod "6 4" 3 (0.25 ~>) $ "[1.7 [~ 0.1]] [~ 0.1] ~ [1.0 0.15]")) $
       s "Sd_kickBlocks"
         -- # amp 0.20000000298023
         # begin 0.0
         # end 0.2 -- 1.0
         # speed 0.5 -- 1.0
         # accelerate 0.6 -- 0.0
         # sustain 1.0
         # t1freq 400.0
         # t1harmonic 2.0
         # t1glide 0.1 -- 0.0099999997764826
         # t1att 0.00050000002374873
         # t1rel 0.0099999997764826
         # t1curve "-4.0"
         # t1del 0.0
         # t1amp 1.0
         # t2freq 50.0
         # t2harmonic 3.4400000572205
         # t2glide 0.0099999997764826
         # t2att 9.9999997473788e-05
         # t2rel 0.30000001192093
         # t2curve "-4.0"
         # t2del 0.0049999998882413
         # t2amp 1.0
         # h1freq 100.0
         # h1harmonic 8.0
         # h1glide 0.0099999997764826
         # h1rq 0.60000002384186
         # h1att 0.0010000000474975
         # h1rel 0.019999999552965
         # h1curve "-4.0"
         # h1del 0.0010000000474975
         # h1amp 1.0
         # h2freq 1320.0
         # h2harmonic 1.0
         # h2glide 0.0
         # h2att 0.003000000026077
         # h2rel 0.029999999329448
         # h2curve "-4.0"
         # h2del 0.0
         # h2amp 0.5
         # cfreq 6100.0
         # crq 1.0
         # camp 1.4099999666214
         # cdur 0.0010000000474975
         # hpf 65
       ,
       -- listen 0 $
       listen (cF 1 "24") $
       degOffsetBy (3/8) (cF 0 "34") $
       whenmod 5 2 (0.25 <~) $
       whenmod 6 4 (|+ coarse "0 [0 1] [~ 6] [2 1]") $
       every "4 <8 10>" (listen 0) $
       -- whenmod 5 2 (jux (rev)) $
       (<| t2freq (every 3 (0.25 ~>) $ slow 2 $ "[20 40 43 82] ~ [44 53 140 92] ~ [11 50 54 66] ~ [23 73 35 10] [12 34 50 91]")) $
       s "Sd_kickBlocks"
         -- # amp 0.20000000298023
         # begin 0.0
         # end 1.0
         # speed 0.5 -- 1.0
         # accelerate "-1.0"
         # sustain 1.0
         # freq 1.0
         # t1freq 400.0
         # t1harmonic 2.0
         # t1glide 0.0099999997764826
         # t1att 0.00050000002374873
         # t1rel 0.0099999997764826
         # t1curve "-4.0"
         # t1del 0.0
         # t1amp 1.0
         -- # t2freq 50.0
         # t2harmonic 3.4400000572205
         # t2glide 0.1 -- 0.0099999997764826
         # t2att 9.9999997473788e-05
         # t2rel 0.30000001192093
         # t2curve "-4.0"
         # t2del 0.0049999998882413
         # t2amp 1.0
         # h1freq 100.0
         # h1harmonic 8.0
         # h1glide 0.0099999997764826
         # h1rq 0.60000002384186
         # h1att 0.0010000000474975
         # h1rel 0.019999999552965
         # h1curve "-4.0"
         # h1del 0.0010000000474975
         # h1amp 1.0
         # h2freq 1320.0
         # h2harmonic 1.0
         # h2glide 1 -- 0.0
         # h2att 0.003000000026077
         # h2rel 0.029999999329448
         # h2curve "-4.0"
         # h2del 0.0
         # h2amp 0.5
         # cfreq 6100.0
         # crq 0.15 -- 1.0
         # camp 1.4099999666214
         # cdur 0.024 -- 0.0010000000474975
         # hpf 130
         # orbit 1
       ,
       -- listen 0 $
       listen (cF 1 "25") $
       degOffsetBy (5/8) (cF 0 "35") $
       whenmod 7 4 (stut' 6 (3.125e-2) (|* speed "[1.1 1.35] 1.5")) $
       every "4 9" (listen 0) $
       every 3 (slow "[<0.5 1> 2] 2" . within (0.25, 0.5)(slowstripe 3)) $
       (<| freq (every "<4 5>" (0.25 <~) $ every 7 (0.25 ~>) $ "0.7 [~ [7 11]] [9 [~ 10]] [~ 3]")) $
       s "Sd_kickBlocks"
         -- # amp 0.20000000298023
         # begin 0.10
         # end 0.7 -- 1.0
         # speed 0.36 -- 1.0
         # accelerate "-0.6" -- 0.0
         # sustain 1.0
         # t1freq 100 -- 400.0
         # t1harmonic 7.14 --  2.0
         # t1glide "-0.4" -- 0.0099999997764826
         # t1att 0.00050000002374873
         # t1rel 0.0099999997764826
         # t1curve "-4.0"
         # t1del 0.0
         # t1amp 1.0
         # t2freq 50 -- 50.0
         # t2harmonic 2.23 -- 3.4400000572205
         # t2glide 0.0099999997764826
         # t2att 9.9999997473788e-05
         # t2rel 0.30000001192093
         # t2curve "-7.0"
         # t2del 0.0049999998882413
         # t2amp 1.0
         # h1freq (slow 3.5 $ range 700 2400 saw)
         # h1harmonic 12 -- 8.0
         # h1glide 0.1 -- 0.0099999997764826
         # h1rq 0.1 -- 0.60000002384186
         # h1att 0.01 -- 0.0010000000474975
         # h1rel 0.123 -- 0.019999999552965
         # h1curve "-8.0"
         # h1del 0.05 -- 0.0010000000474975
         # h1amp 0.6 -- 1.0
         # h2freq 8320.0
         # h2harmonic 4.0
         # h2glide 0.0
         # h2att 0.0003000000026077
         # h2rel 0.0129999999329448
         # h2curve "-7.0"
         # h2del 0.05 -- 0.0
         # h2amp 0.431 --  0.5
         # cfreq 6100.0
         # crq 0.1 -- 1.0
         # camp 0.7 -- 1.4099999666214
         # cdur 0.032 -- 0.0010000000474975
         # hpf 90
         |* gain 0.8
         # orbit 2
  ]
  |* gain 1.03
  # cps 0.65

-- nouvo mai 23
-- 100% rungler
-- clutchIn 1 16 $ silence
d1 $
  whenmod "12 26 32" "11 24 28"
    (
    (|* ffreq (wchoose [(0.5, 0.3), (0.4, 0.2), (0.25, 0.25), (0.75, 0.25)]))
    . (|* switchSrcRate "<0.158 0.89> 3")
    . (|* gain 0.82)
    ) $
  every "<9 [3 2]>"
    ((|* switchSrcRate (scale "prometheus" (every 3 (slow 2 . rev) "0 .. 10"))) . (|* gain 0.87 )) $
  stack [
      -- listen 0 $
      randcat [
      listen (cF 1 "23") $
      degOffsetBy (1/7) (cF 0 "33") $
      foldEvery [7, 11] (listen 0) $
      fast "1 2" $
      (<| end (every 3 (0.25 ~>) $ "0.3 0.1@2 <1 0.4 ~>@0.5")) $
      s "Sd_runglerDeter"
        -- # amp 0.20000000298023
        # begin 0.3
        -- # end 0.65 -- 1.0
        # speed 0.10
        # accelerate 0.0
        # freq 0.04 -- 4.0
        # attack "0.7 0.1" -- 0.0010000000474975
        # sustain 0.24 -- 1.0
        # release 0.35 -- 1.3999999761581
        # curve "6.0"
        # envPow 4 -- 1.0
        # lfSrc1Sel 4
        # lfSrc1Rate 65 -- 0.69999998807907
        # lfSrc2Sel (every 2 rev $ "4 0")
        # lfSrc2Rate 100 --  0.23999999463558
        # switchSrcRate 6 -- 0.40000000596046
        # ffreq 22
        # gain 0.93
        # orbit 2
      ,
      listen (cF 1 "24") $
      degOffsetBy (1/7) (cF 0 "34") $
      every 5 (listen 0) $
      (<| release (slow "2 1" $ "{<0.4 0.1> 0.45 <0.8 1 ~> 1.2}%7")) $
      s "~ Sd_runglerDeter"
        -- # amp 0.20000000298023
        # begin 0.25 -- 0.0
        # end "0.5 0.75 0.5" -- 1.0
        # speed (every 3 (|* 0.1) $ 0.7)  -- 1.0
        # accelerate "-0.1" -- 0.0
        # attack 0.014 -- 0.0010000000474975
        # sustain (fast "2 3 1" $ "0.4 0.96 0.31") -- 0.6 -- 1.0
        -- # release 0.43 -- 1.3999999761581
        # freq "0.10 4 2" -- 0.10
        # curve "-3.0"
        # envPow 1.0
        # lfSrc1Sel 0
        # lfSrc1Rate 167 -- 0.69999998807907
        # lfSrc2Sel 1
        # lfSrc2Rate 17 -- 0.23999999463558
        # switchSrcRate 4 -- 0.40000000596046
        # ffreq 20
        # gain 0.9
        # orbit 1
      ]
        # whammy 0.64
        # whammyfreq 1516
        # whammydelay 0.01
        # whammyshift 0.05
        # digidest 0.4
      ,
      -- séquence à refaire
      -- midrange reverb
      listen "<1 1 <1 0>>" $
      listen (cF 1 "25") $
      degOffsetBy (2/7) (cF 0 "35") $
      -- listen 0 $
      every 4 (loopAt 2 . listen 0) $
      -- whenmod 10 7 (listen 1) $
      (<| freq (slow "2 3.5" $ every 3 ((2/7) <~) $ "3 <~ 2> 0.4 <20 1 0.1>@0.5"))  $
      s "Sd_runglerDeter"
        -- # amp 0.20000000298023
        # begin 0.10
        # end 0.40
        # speed "{0.10 <0.01 0.75 1.12> 0.1}%5"
        # accelerate 0.30
        -- # freq 4.30
        # attack 0 -- 0.0010000000474975
        # sustain 0.6 -- 1.0
        # release 0.7 -- 1.3999999761581
        # curve "-12.0"
        # envPow 4.0
        # lfSrc1Sel 3.0
        # lfSrc1Rate 0.02 -- 0.69999998807907
        # lfSrc2Sel 4.0
        # lfSrc2Rate 0.24 -- 0.23999999463558
        # switchSrcRate 3 -- 0.40000000596046
        # ffreq 2.0
        -- 180623
        -- # cloudspitch "0 <-1.2 <-3 1 2>?>"
        # cloudspitch "0"
        # cloudspos (range 0.3 0.47 $ fast 2 tri) -- 0
        # cloudssize 0.98
        # cloudsdens (fast 3.5 "0.2 0.8")
        # cloudsgain 0.8 -- 1.2
        # cloudswet 0.8
        # verbwet "0.34 0.8 0.1"
        # verbtime 0.38
        # verbdiff 0.5
        # verbgain 1.2
        # delaytime 0.05
        # delayfb 0.3
        # delay (every 3 (rotL 1) $"0 <0.7 [0.4 0.1]> 0")
        # lock "0 1"
        # orbit 2
      ,
      -- canard ringmod
      listen (cF 1 "26") $
      degOffsetBy (3/7) (cF 0 "36") $
      every 4 (listen 1) $
      whenmod 7 5 (listen 0) $
      -- listen (slow 3.5 "1 0 1 0 0 1 0 1") $
      every 12 (chunk 7 (hurry 2)) $
      juxBy 0.4 (spin 2 . (|* gain 0.35)) $
      (<| freq (density "2 1" $ every 3 ("1/7 3/7 -2/7" ~>) $ "0.2 [~ 0.5] ~ 1 0.01 [~ 1] ~")) $
      -- (<| ffreq (fast "2 1" $ every 3 ("1/7 2/7" ~>) $ "0.01!2 0.1 ~@0.5")) $
      s "Sd_runglerDeter"
        -- # amp 0.20000000298023
        # begin 0.2 -- 0.0
        # end 0.32 -- 1.0
        # speed 0.1 -- 0.71 -- 1.0
        # accelerate 0.30
        -- # freq 1  -- 440.0
        # ffreq "10.8 30 20 1 0.3"
        -- # ffreq 0.08
        # attack 0.05 -- 0.0010000000474975
        # sustain 0.36 -- 1.0
        # release 0.26 -- 1.3999999761581
        # curve "-17.0"
        # envPow 1.1 -- 1.0
        # lfSrc1Sel 1 -- 0.0
        # lfSrc1Rate 2 -- 0.69999998807907
        # lfSrc2Sel 0 -- 1.0
        # lfSrc2Rate 1 -- 0.23999999463558
        # switchSrcRate 4 -- 0.40000000596046
        # lpf 9000
        # hpf 800
        # pan (slow (4/3) tri)
        # legato 0.9
        # gain 0.8
        # orbit 2
      ,
      -- toms
      listen (cF 1 "27") $
      degOffsetBy (1/14) (cF 0 "37") $
      -- listen (slow 1.75 "0 1 1 0 0 0 1 0 1" ) $
      foldEvery [5,7] (listen 0) $
      every 3 (jux (|* speed "-1")) $
      (<| ffreq (every 2 ("<1/7 2/7>" <~) $ "<30 20> <[~ 39] ~> <30 [~ 35]> ~@0.5")) $
      s "Sd_runglerDeter"
        -- # amp 0.20000000298023
        # begin "0.1 0.3 0.1" -- 0.0
        # end 0.5 -- 1.0
        # speed "<[0.05 2?] 0.1> 0.1" -- 1.0
        # accelerate 0.0
        # freq "20 1" -- 0.1
        # attack "0.1 0" -- 0.0010000000474975
        # sustain "<0.1 0.5> 0.1" -- 1.0
        # release 0.3 -- 1.3999999761581
        # curve "-9.0"
        # envPow 5.0
        # lfSrc1Sel 1.0
        # lfSrc1Rate 0.15 -- 0.69999998807907
        # lfSrc2Sel 3.0
        # lfSrc2Rate 0.01 -- 0.23999999463558
        # switchSrcRate 75 --  0.40000000596046
        -- # ffreq 30
        # legato 0.3
        # orbit 1
      ,
      -- metallic
      listen (cF 1 "28") $
      degOffsetBy (1/7) (cF 0 "38") $
      listen "<[0 1] <1 0>>" $
      every 3 (echoWith 4 "1/14" ((# delay 0.6) . (# delayfb "0.6 0.3 0.75 0.2") . (# delaytime "0.075 0.15") . (# lock 0) . (|* gain 0.33))) $
      (<| freq ( "[0.7 [~ 0.1]]*<2 1> [~ 0.2] <0.3 ~> [0.7 0.2]*<2 1 2> [~ 0.3] [~ 0.2] ") ) $
      -- (<| freq (every 2 (rot "<2/7 0> [1/7 2/7]") $ "[0.7 [~ 0.1]]*<2 1> [~ 0.2] <0.3 ~> [0.7 0.2]*<2 1 2> [~ 0.3] ~ [~ 0.2]") ) $
      s "Sd_runglerDeter"
        -- # amp 0.45
        # begin 0.54 -- 0.0
        # end 0.6 -- 1.0
        # speed 0.42 -- 1.0
        # accelerate "-10.3" --  0.0
        # attack 0.0 -- 0.0010000000474975
        # sustain 0.2 -- 1.0
        # release 0.3 -- 1.3999999761581
        -- # freq 0.2 -- 440.0
        # curve "-7.0"
        # envPow 3.6 -- 1.0
        # lfSrc1Sel 2 -- 0.0
        # lfSrc1Rate 0.01 --  0.69999998807907
        # lfSrc2Sel 0.0
        # lfSrc2Rate 0.02 -- 0.23999999463558
        # switchSrcRate 0.01 -- 0.40000000596046
        # ffreq 5 -- 24.0
        # fshift 0.6
        # fshiftnote "1 2 1"
        # fshiftphase 0.314
        # gain 1.1
        # bpf 6200
        # bpq 0.5
        # pan (segment 28 $ fast 3.5 tri)
        # orbit 2
        # shape 0.3
      ,
      listen (cF 1 "29") $
      degOffsetBy (3/14) (cF 0 "39") $
      every 4 (listen 0) $
      listen "0 [1 0 1 0 1]" $
      (<| ffreq (every 2 (density (rot "<0 2/3>" $ "2 [2.5 0.75] 1")) "~ [[24 2] [10 2.0] 14@0.5 [18 12]]")) $
      s "Sd_runglerDeter"
        -- # amp 0.20000000298023
        # begin 0.14
        # end 0.20
        # speed 1.4 -- 1.0
        # accelerate 1 -- 0.0
        # freq 3 -- 10 -- 440.0
        # attack 0 -- 0.0010000000474975
        # sustain 0.3 -- 1.0
        # release 0.3 -- 1.3999999761581
        # curve "-4.0"
        # envPow 1.0
        # lfSrc1Sel 0.0
        # lfSrc1Rate 0.69999998807907
        # lfSrc2Sel 1.0
        # lfSrc2Rate 0.23999999463558
        # switchSrcRate 0.40000000596046
        # orbit 1
        -- # ffreq "24 2.0 14"
      ,
      -- pattern fabien
      -- kick 2
      -- listen 0 $
      listen (cF 1 "30") $
      degOffsetBy (1/7) (cF 0 "40") $
      sometimesBy 0.13 (listen 0) $
      (<| amp "{~ 0.9(2, 3) <[~ 0.6 0.9] 0.9>}%7") $
      s "Sd_runglerDeter"
        # begin 0.0
        # end 1.0
        # sustain 1.0
        # attack 0.0010000000474975
        # release 0.83999999761581
        # curve "-4.0"
        # envPow 1.0
        # speed "3 1 <2 1>"
        # lfSrc1Sel 1.0
        # lfSrc1Rate 70
        # lfSrc2Sel 1.0
        # lfSrc2Rate 0.24
        # switchSrcRate 140.4
        # ffreq 24.0
        # hpf 67.5
        # gain 1.2
      ,
      -- listen 0 $
      listen (cF 1 "31") $
      degOffsetBy (2/7) (cF 0 "39") $
      sometimesBy 0.53 (listen 0) $
      ((5/7)<~) $
      whenmod "14 24" "13 22"
      (slow "4 2") $
      (<| amp "{0.9(2, 3, 1) ~ <[~ 0.6 0.9] ~>}%[7 3.5]") $
      s "Sd_runglerDeter"
        # begin 0.0
        # end 1.0
        # sustain 1.0
        # attack 0.001
        # release 1
        # curve "8.0"
        # envPow 1.0
        # speed "<0.4 0.6 0.5>"
        # accelerate 0.98
        # lfSrc1Sel 4
        # lfSrc1Rate 0.3
        # lfSrc2Sel 4
        # lfSrc2Rate 31.4
        >| switchSrcRate 318.9
        # ffreq 30.2 -- (24.0 + (smooth $ slow "2 4" $ range "-2" 6 $ cosine))
        # hpf  90
        # pan (range 0.3 0.7 $ slow "2 3" cosine)
        # gain 1.2
      ,
      -- listen 0 $
      listen (cF 1 "29") $
      degOffsetBy (3/7) (cF 0 "40") $
      sometimesBy 0.21 (listen 0) $
      ((2/7) ~>) $
      (<| amp "{<[~ 0.6 0.9] 0.9> 0.9(2, 3, 1) ~}%7") $
      s "Sd_runglerDeter"
        # begin 0.0
        # end 1.0
        # sustain 0.96
        # attack 0.010000000474975
        # release 0.8
        # legato 3
        # curve "6.0"
        # envPow 1.0
        # speed 1
        # accelerate 1
        # lfSrc1Sel 3
        # lfSrc1Rate 270
        # lfSrc2Sel 2
        # lfSrc2Rate 24.2
        # switchSrcRate 6.4
        # ffreq 78
        # lpf 300
        # hpf 100
        # gain 1.4
      ,
      -- kick 3
      -- listen 0 $
      listen (cF 1 "30") $
      degOffsetBy (4/7) (cF 0 "41") $
      someCyclesBy 0.26 (listen 0) $
      -- whenmod "19 36" "18 34"
      -- ((3/7) ~>) $
      (<| amp "0.9(9, 14, 2)*2") $
      s "Sd_runglerDeter"
        # begin 0.0
        # end 1.0
        # sustain 1.0
        # attack 0.0010000000474975
        # release "0.3 1"
        # curve "-4.0"
        # envPow 1.0
        # speed 2
        # accelerate 0.4
        # lfSrc1Sel 0
        # lfSrc1Rate 27
        # lfSrc2Sel 0
        # lfSrc2Rate 0.41
        # switchSrcRate 74.4
        # ffreq 0.92
        # pan (range 0.2 0.8 $ segment 64 $ slow "2 4" (cosine * ((choose [0.125, 6.25e-2] ~>) sine)))
        # gain 0.71
  ]
# cps 0.4
|* gain 1.15


-- le deuxieme pied marin
-- 180223
-- xfadeIn 1 16 $
d1 $
  -- every 6
  someCyclesBy 0.24
  (
    (chunk 5 (spreadf [spin 2, hurry "2 0.5"]))
    . fix (# hpf 120) (s "Sd_kick3new")
    . fix (|* gain 0.5) (s "Sd_hat808")
    . every 2 (loopAt "<1 2>")
    . sometimes ((|* speed 3) . (|* gain 0.91))
    . (# legato 1.2)
  ) $
  stack [
     -- listen 0 $
     listen (cF 1 "23")  $
     degOffsetBy (1/5) (cF 0 "33") $
     whenmod 13 10 (listen 0) $
     (<| sustain "[0.32!2 0.15]!3 <0.315 0.125>!2") $
     -- (<| sustain "[0.28 0.1]!2 0.7 0.2@2" ) $
     s "Sd_kick3new"
       # tu 1
       # speed "[1 0.7]!5"
       # rls 3
       -- 090223
       -- # sustain 1
       -- # release 1
       # hpf 130 -- 80
       # gain 1.03
     ,
     -- listen 0 $
     listen (1 - ( cF 1 "24")) $
     degOffsetBy (2/5) (cF 0 "34") $
     every 5 (listen 0) $
     foldEvery [3,7] ("<[0.2 -0.4] [0.4 -0.2]>" <~) $
     -- (<| amp "[0@2 0.3]!2 0.1 0@2") $
     (<| amp "[0@2 0.3]!2 0.3 0@2") $
     -- (<| freq "1!2 2 [1 2]!2 ") $
     s "Sd_kickBlocks"
       -- # amp 0.3
       -- env 0223
       # att 0
       # dec 1.9
       # sustain 3
       # rel 1.9
       # begin 0.0
       # end 1.0
       # speed 1.0
       # accelerate 0.0
        -- # freq 1.0
       # t1freq  (fast ((cR 0 "34") * 4.2) $ range "200 300" 400 square)-- 400.0
       # t1harmonic ("1 2" + ((cF 0.1 "34") * 2)) -- 2.0
       # t1glide 0.001
       # t1atk 0.0005
       # t1rls 2.41 -- 0.01
       # t1curve "0"
       # t1del 0.6
       # t1amp 0.5 -- 1.0
       # t2freq 80 -- 50.0
       # t2harmonic 3.44
       -- edit 150323
       # t2glide ((cF 0 "34") * 0.05 ) -- 0.001
       # t2atk 0.0001
       # t2rls 1.85 -- 0.3
       # t2curve "0"
       # t2del 0.005
       # t2amp 1.0
       # h1freq 80 -- 100.0
       # h1harmonic 8.0
       # h1glide 0.01
       # h1rq 0.6
       # h1atk 0.001
       # h1rls 15.2
       # h1curve "0"
       # h1del 0.0001
       # h1amp 10
       # h2freq 1320.0
       # h2harmonic 1.0
       # h2glide 0.2
       # h2atk 0.003
       # h2rls 1.3
       # h2curve "0"
       # h2del 0.32
       # h2amp 1.5
       # cfreq 200 -- 6100.0
       # crq 1.0
       # camp 1 -- 1.41
       # lpf 8000
       # gain 0.88
       -- ajout 180223
       -- # freq "<[1 2] [0.5 0.75]>"
    ,
    -- listen 0 $
    listen (cF 1 "25") $
    degOffsetBy (3/5) (cF 0 "35") $
    foldEvery [5,7] (listen 0) $
    someCyclesBy 0.35
    ((wchoose [(0.25, 0.34), (0.75, 0.23), (0.125, 0.43)]) ~>) $
    (slow 2 . (# pan (smooth $ slow 2.2 $ range 0 1 tri ))) $
    -- (<| speed "1!2 [0.2 0.9]!2 0.7") $
    s "Sd_hat808*<2 <2 1>>"
      -- # amp 0.1
      # attack 0.001
      # release 1.7
      # amp 0.4
      # begin 0.0
      # end 1.0
      # speed "<1 <0.2 0.9> 0.7>"
      # accelerate ((cF 0 "35") * 0.4) -- 0.2
      # sustain 0.82
      # freq 0.9643
      # rls 0.410000000149012
      # rhpfFreq 2700.0
      # rhpfRq 0.85
      # rhpf1Freq 12000.0
      # rhpf1Rq (0.4 + ((cF 0 "35") * 0.35)) -- 0.45
      -- # legato 1.2
      # orbit 2
      -- # lpf 20000
      # gain 0.6 -- 0.78
    ,
    -- listen 0 $
    listen (cF 1 "26") $
    degOffsetBy (3/10) (cF 0 "36") $
    whenmod 12 9 (listen 0) $
    foldEvery [3,7] (listen 0) $
    s "Sd_werkit"
       # amp 0.3
       # attack 0.0012
       # release 20
       # begin 0.0
       # end 1.0
       # speed 1.0
       # accelerate ((cF 0 "36") * "-0.4")--  0.0
       # sustain 10.0
       # freq  180.0
       # rq 0.031
       # hpf 270
       # orbit 1
       # gain 0.68 -- 1.06
    ,
    -- listen 0 $
    listen (cF 1 "27") $
    degOffsetBy (2/5) (cF 0 "37") $
    whenmod 13 11 (listen 0) $
    inside 5 (hurry 0.5) $
    someCycles (compress (0,2/4)) $
    someCyclesBy 0.2  (*| harmFreq "<[1.5 0.8] [0.5 1.5]>") $
    (<| amp "[~ 0.1 ~ [~ [0.06 0.098] 0.04]]") $
    s "Sd_tubularBell"
      -- # amp 0.1
      # begin 0.0
      # end 1.0
      # speed 1.0
      # accelerate 0
      # sustain 1.0
      # freq "540 [540.0, 321]"
      # harmFreq 0.32
      # harmAmp 1.0
      # harmTime (0.22 + ((cF 0 "37") * 0.4)) --  0.22
      # atk 0.0049999998882413
      # rls "<9 4>"
      # exciterRel "0.25 0.7"
      # orbit 1
      # gain 0.84
    ,
    -- listen 0 $
    listen (cF 1 "28") $
    degOffsetBy (3/10) (cF 0 "38") $
    whenmod 16 10 (listen 0) $
    every 5 (listen 0) $
    foldEvery [3,7] ("<[-0.1 0.2] 0.4 [-0.2 0.4]>" ~>) $
    -- density "<1 1 [1 2]>" $
    someCyclesBy 0.2
    (jux (chunk 5 (hurry 0.5)) . every 2 (listen 0)) $
    -- (<| amp "[0@2 0.13]!2 0.1 0@2") $
    (<| att "{<[~@2 [0.01 0.03(1, 3, 3) ~] 0.01] [0.01 ~@2 [0.01 0.03(1, 3, 3) ~]]>}%1.25") $
    s "Sd_rim1"
      # amp 0.12
      # attack (smooth $ range 0 0.1 $ fast "<2 3>" $ ((3/5) ~>) $ perlin)
      # release (0.1 * (smooth $ range 1 10 cosine))
      # begin 0.0
      # end 1.0
      # speed 0.4 -- 1.0
      # accelerate 0.12 -- 0.0
      # sustain 0.26
      # freq 30.1 -- 440.0
      # envfL1 "60 100" -- 1600.0
      # envfL2 180 -- 5600.0
      # envfL3 "150 60?" -- 800.0
      # envfL4 90 -- 250.0
      # envfT1 0.0011 -- 0.0010000000474975
      # envfT2 0.001 -- 0.0010000000474975
      # envfT3 0.1 -- 0.0010000000474975
      # envf2L1 40 -- 1000.0
      # envf2L2 50 -- 1600.0
      # envf2L3 90 -- 700.0
      # envf2L4 120 -- 200.0
      # envf2T1 0.003 -- 0.0010000000474975
      # envf2T2 0.0013 -- 0.0010000000474975
      # envf2T3 (0.07 + ((cF 0 "38") * 0.1)) -- 0.085 -- 0.059999998658895
      # sinFreq 4.5 -- 400.0
      # rhpfFreq 90 -- 100.0
      # rhpfRq 0.6 -- 1.0
      # bpfFreq1 20 -- 327.0
      # bpfFreq2 1420 -- 430.0
      # bpfRq1 0.5
      # bpfRq2 0.2 -- 0.5
      # rlpfFreq 1400 -- 11100.0
      # rlpfRq 0.3 -- 0.5
      # orbit 2
      # gain 0.7
    ,
    -- listen 0 $
    listen (cF 1 "29") $
    degOffsetBy (1/5) (cF 0 "39") $
    foldEvery [5,8] (listen 0 . slow 2) $
    someCyclesBy 0.7 (spreadf [fastGap "<4 6 8 12>", fastGap "[<4 3> 8]", listen 0]) $
    someCycles
    (fastGap "[<4 3> 8]") $
    someCyclesBy 0.12 (hurry 0.5) $
    every 3 ("<0.2 0.4 -0.2>" ~>) $
    ( <| sustain ( "[0.1 0.05]!2 [0.2 0.06]!4 [0.3 0]!4")) $
    -- (<| amp "[0.1 0.01]!4 [0.01 0.02]!2 [0.01 0.1]!4") $
    s "cym_Sd"
       # amp 0.2
       # att 0.0
       # sus "[0.05 0.09]!10"
       # rel 0.8 -- 1.0
       # curve "-8.0"
       # tu ("2!2 [3 4]!3" + (fast ((cR 0 "39") * 6.1) $ range 0 (0.15 + ((cF 0 "39") * 0.2)) tri))-- "2!2 [3 4]!3"
       # hpf 1100
       # pan perlin
       # orbit 1
       # gain 0.87
    ,
    every 3 (listen 0) $
    slowCat [
      -- listen 0 $
      listen (cF 1 "30") $
      degOffsetBy (3/5) (cF 0 "40") $
      whenmod 13 10 (listen 0) $
      (<| amp "[0.12 0.1] ~ [0.12 0.08]!2 ~") $
      s "braids"
       -- # amp 0.12 -- 0.30000001192093
       # sustain 1.0
       # begin 0.0
       # end 1.0
       # sustain "[0.75 0.9]!5"
       # release "1 0.8"
       # freq "4650 930 "
       # speed "[0.5 <1 2>] [<0.5 1> 2]" -- "<1 2>"
       # accelerate 0.125 --  0.0
       # timbre (segment 12 $ fast 6 $ often ("<0.2 0.6 0.1 -0.2 -0.1>" <~) $ range 0.3 0.76 isaw) -- 0.5
       # color ( "<<0.1 1> 0.4>" + ((cF 0 "40") * 0.2)) --  "<<0.1 1> 0.4>"
       # model (fast 2 $ "<43 <27 26>>")
       # gain 0.88
      ,
      listen (cF 1 "31") $
      degOffsetBy (1/5) (cF 0 "41") $
      whenmod 9 6 (listen 0) $
      -- (<| level "[0.12 0.1] ~ [0.12 0.08]!2 ~") $
      (<| level "0.12(3, 5, 2)/2") $
      s "plaits"
        # attack 0.0012
        # release (1 * (range 0.5 1 $ slow 2 $ perlin))
        # freq "[222, 442]"
        # sustain 1.0
        # begin 0.0
        # end 1.0
        # speed 1
        # accelerate 0
        # timbre (0.35 * (smooth $ range 1 "<1.2 1.3>" $ slow "2 4" $ sine))
        # engine "[13, <11 14>]"
        # harm 0.5
        # morph (0.2 + ((cF 0 "41") * 0.3)) --  0.35
        # lpgdecay 0
        # lpgcolour 0
        # hpf 140
        # gain 0.78
    ]
      # orbit 1
  ]
|* gain 1.23
# cps 0.56


resetCycles


clutchIn 1 16 $ silence